Frelander 2. Manual — part 262
Install the accessory drive belt.
1.
2. NOTE: Make sure that the component is installed to the position
noted on removal.
Install the PAS pump.
Torque: 25 Nm
2.
Install the A/C compressor.
Torque: 25 Nm
3.
Install the accessory drive belt.
4.
Install the A/C compressor, lower support bracket.
Torque: 25 Nm
5.
Install the A/C compressor, upper support bracket.
Torque:
M10 45 Nm
M8 25 Nm
M6 10 Nm
6.
Install the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
7.
Install the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
8.
Install the engine cover.
Refer to:
Engine Cover - I6 3.2L Petrol
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
9.
Accessory Drive - I6 3.2L Petrol - Accessory Drive Belt Tensioner
Removal and Installation
Removal
Remove the cover and disconnect the battery ground cable.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
1.
Remove the engine cover.
Refer to:
Engine Cover - I6 3.2L Petrol
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
2.
Remove the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
3.
Remove the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
4.
Remove the A/C compressor, upper support bracket.
5.
Remove the A/C compressor, lower support bracket.
6.
Using suitable tools, release the accessory drive belt
tension.
7.
Release the A/C compressor and position aside.
8.
Remove the accessory drive belt tensioner.
9.
Installation
1. NOTE: Make sure that the component is installed to the position
noted on removal.
1.
Install the accessory drive belt tensioner.
Torque: 25 Nm
Install the A/C compressor.
Torque: 25 Nm
2.
Install the accessory drive belt.
3.
Install the A/C compressor, lower support bracket.
Torque: 25 Nm
4.
Install the A/C compressor, upper support bracket.
Torque:
M10 45 Nm
M8 25 Nm
M6 10 Nm
5.
Install the air cleaner assembly.
Refer to:
Air Cleaner
(303-12A Intake Air Distribution and Filtering -
I6 3.2L Petrol, Removal and Installation).
6.
Install the battery tray.
Refer to:
Battery Tray
(414-01 Battery, Mounting and Cables,
Removal and Installation).
7.
Install the engine cover.
Refer to:
Engine Cover - I6 3.2L Petrol
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
8.
Connect the battery ground cable and install the cover.
Refer to:
Specifications
(414-00 Battery and Charging System -
General Information, Specifications).
9.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст