Frelander 2. Manual — part 736

Audio unit overview

222

L

Basic audio functions

• Press rotary control to switch audio unit

on or off.

• Rotate control to adjust volume or to

adjust menu settings levels.

• Press and release tone button to access

the tone settings menu.

• Press and hold tone button to access the

volume settings menu.

• Press and release INFO button to activate

or deactivate the traffic announcements
(TA) function.

• Press and hold INFO button to activate or

deactivate the news broadcasts function.

• Press MENU button to access various

audio menus.

• Rotate control to scroll through menu

items.

• Press rotary control to enter or confirm

menu selection.

• Press and release EXIT button (C button on

standard audio units) to go back to the
previous screen.

• Press and hold EXIT button (C button on

standard audio units) to return to main
display.

E83955

E83956

223

Audio unit operation

R

Audio unit operation

ON OR OFF CONTROL

Press the on or off control to switch the audio
unit on. Press again to switch off.

VOLUME CONTROL

Rotate the volume control to increase or
decrease the audio unit volume. The volume
can be set between 0 and 35.

When the audio unit is turned on, the
previously set volume level will be
implemented.

Note: The standard audio unit can be used with
the engine off, but the maximum volume level
will be restricted.

Automatic Volume Control (AVC)

The AVC feature adjusts the volume level to
compensate for the changes in road noise as
the vehicle speed increases or decreases.

Note: The AVC setting represents the volume
increase and not the volume level.

If the AVC level is set to Off, there will be no
volume increase. With a low level setting, the
volume increase at speed will be minimal. If a
high level setting is used, there will be a
noticeable increase of volume at speed.

The AVC setting required will depend upon the
expected speed and the expected road
conditions.

Use the following procedure to set the AVC
level.

1. Press and hold the tone button to access

the volume settings menu.

2. Press the tone button repeatedly until AVC

Level is displayed.

3. Rotate the volume control to select the

required AVC setting.

Reset volume settings

The following procedure will reset all of the
volume settings to the original factory values.

1. Press and hold the tone button to access

the volume settings menu.

2. Repeatedly press the tone button to scroll

through the menu until the Reset volume
settings message is displayed.

3. Rotate the volume control to highlight YES

or NO as required.

4. On premium audio units, press the tone

button to confirm your choice and exit the
menu. On standard audio units, your
choice is confirmed by pressing the MENU
button.

AUDIO CONTROL

Depending on the specification of the audio
system fitted to your vehicle, the following
audio control settings are available from the
tone menu.

Surround sound settings

1. Press and release the tone button to

display the current surround sound
setting.

2. Rotate the volume control to highlight 3

Channel or Stereo as required.

Bass response adjustment

1. Press the tone button repeatedly until the

current Bass setting is displayed.

2. Rotate the volume control to increase or

decrease the level.

Treble response adjustment

1. Press the tone button repeatedly until the

current Treble setting is displayed.

2. Rotate the volume control to increase or

decrease the level.

Audio unit operation

224

L

Balance adjustment

1. Press the tone button repeatedly until the

current Balance setting is displayed.

2. Rotate the volume control to adjust sound

level to the right or left.

Fader adjustment

1. Press the tone button repeatedly until the

current Fader setting is displayed.

2. Rotate the volume control to adjust the

sound level to the front or rear.

Subwoofer settings

1. Press the tone button repeatedly until the

current Subwoofer setting is displayed.

2. Rotate the volume control to increase or

decrease the setting.

Centre speaker settings

1. Press the tone button repeatedly until the

current Centre setting is displayed.

2. Rotate the volume control to increase or

decrease the setting.

Resetting tone values

Use the following procedure to return the tone
settings to the factory defaults.

1. Press the tone button repeatedly until the

Reset tone settings message is displayed.

2. Rotate the volume control to highlight YES

or NO as required.

3. On premium audio units, press the tone

button to confirm your choice. On
standard audio units, use the MENU
button.

All settings will be reset to the neutral (central)
value.

WAVEBAND BUTTON

To select the FM waveband, press and release
the FM button. Repeated presses will scroll
between FM1 and FM2. On standard audio
units FMa is also available. The selection will
be shown in the top left-hand corner of the
information display.

To select the AM waveband, press and release
the AM button. The selection will be shown in
the top left-hand corner of the information
display. On standard audio units, repeated
presses of the AM button will scroll through
MW1, MWa, LW1 and LWa.

225

Audio unit operation

R

AUTOSTORE CONTROL

Autostoring radio stations - Premium
audio

To autostore stations on premium audio units,
select the required waveband, then press and
hold the AUTO button for three seconds.
Autostoring will be shown in the information
display and the stations will be stored under
the preset numbers in the order in which they
are found.

To access the autostored stations, press and
release the AUTO button. FMA or AMA will be
displayed, depending on the selected
waveband.

To recall an autostored station, press and
release the required preset number.

To exit the selected autostore waveband, press
and release the AUTO button.

Autostoring radio stations - Standard
audio

To autostore stations on standard audio units,
select the required waveband, then press and
hold the relevant waveband button for three
seconds. Autostore will be shown in the
information display and the stations will be
stored under the preset numbers in the order in
which they are found.

To recall an autostored station, press and
release the required preset number.

Autostoring.

CANCEL

E82933

FMa

14 : 54

Autostore

E83959