Frelander 2. Manual — part 452
Parking Aid - Front Inner Parking Aid Sensor
Removal and Installation
Removal
1.
WARNING: Do not work on or under a vehicle supported only
by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
1.
Remove the front wheels and tires.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
Remove the front bumper cover.
Refer to:
Front Bumper Cover
(501-19 Bumpers, Removal and
Installation).
3.
4.
Installation
1.
CAUTION: If a new sensor is installed, only the front face
must be painted. Failure to follow this instruction may result in the
component malfunctioning.
To install, reverse the removal procedure.
1.
Parking Aid - Front Outer Parking Aid Sensor
Removal and Installation
Removal
• NOTE: Removal of the RH front outer parking aid sensor will require the removal of the front bumper cover.
1.
WARNING: Do not work on or under a vehicle supported only
by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
1.
Remove the front wheel and tire.
Refer to:
Wheel and Tire
(204-04 W heels and Tires, Removal and
Installation).
2.
3.
4.
Installation
1.
CAUTION: If a new sensor is installed, only the front face
must be painted. Failure to follow this instruction may result in the
component malfunctioning.
To install, reverse the removal procedure.
1.
Parking Aid - Parking Aid Module
Removal and Installation
Removal
Remove the LH rear quarter trim panel.
Refer to:
Rear Quarter Trim Panel
(501-05 Interior Trim and
Ornamentation, Removal and Installation).
1.
Remove the parking aid module.
2.
Installation
To install, reverse the removal procedure.
1.
If a new component is to be installed, configure using IDS.
2.
Parking Aid - Rear Inner Parking Aid Sensor
Removal and Installation
Removal
1.
WARNING: Make sure to support the vehicle with axle
stands.
Raise and support the vehicle.
1.
2.
Installation
1.
CAUTION: If a new sensor is installed, only the front face
must be painted. Failure to follow this instruction may result in the
component malfunctioning.
To install, reverse the removal procedure.
1.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст