Range Rover 2. Electrical Manual — part 60
POWER WINDOWS
L1
6
CIRCUIT DIAGRAM
BO
7
C362
Z238
Body Electrical
Control Module
(BECM)
30
F 12
30 A
3
C354
C704L
4
C703L
C353
BK
14
5
RN
16
2
S
2
1
C705L
C355
YR
16
1
3
C707L
1
5
M116
Left Rear Window
Motor
M
4
2
YB
BG
5
6
6
C707L
B
Z238
Body Electrical
Control Module
(BECM)
2
C362
E367
3
C355
C705L
See Ground Dis-
tribution
C362
10
C361
SO
C704L
C354
2
C353
C703L
0
[1]
[2]
C361
C704L
C354
2
C706L
4
1
X188
Left Rear Window
Door Switch
[1]
Up
[2]
Down
3
C706L
B
S701L
See Ground Dis-
tribution
S353
B
POWER WINDOWS
L1
7
CIRCUIT DIAGRAM
BO
8
C326
Z238
Body Electrical
Control Module
(BECM)
30
F 2
30 A
3
C304
C704R
3
C703R
C303
BK
17
5
RN
11
2
S
10
1
C705R
C305
YR
8
1
3
C707R
1
5
M124
Right Rear Win-
dow Motor
M
4
2
YB
BG
5
6
6
C707R
B
Z238
Body Electrical
Control Module
(BECM)
15
C326
E328
3
C305
C705R
See Ground Dis-
tribution
5
SO
C704R
C304
2
C303
C703R
0
[1]
[2]
C323
C704L
C304
2
C706R
4
1
X189
Right Rear Win-
dow Door Switch
[1]
Up
[2]
Down
3
C706R
B
S701R
See Ground Dis-
tribution
S307
B
SUNROOF
L4
CIRCUIT OPERATION
1
CIRCUIT OPERATION
The sunroof can operate in either slide or tilt mode.
To change from one mode to the other, the sunroof
must be in the closed position, the switch released
and then repressed.
The sunroof functions will be active if the ignition is
selected or for the first 45 seconds after it has been
switched off provided that no door lock signal is
received, in which case the timer will be cancelled.
The sunroof slide function will operate in one of two
modes: one touch, or dead man’s handle. One touch
mode is initiated when the sunroof switch is operated
for less than 400ms, dead man’s handle mode is
initiated when the sunroof switch is operated for
400ms or more. Further operation of either sunroof
switch during the one shot mode will cause the
sunroof to stop operation.
The sunroof tilt function will operate in deadman’s
handle mode only.
There will be trap detection on sunroof close and on
tilt close, but not on opening operations.
If a trap is detected whilst the sunroof is closing from
the slide position, then the sunroof will back off 20cm
or until the motor stalls. If a trap is detected whilst
the sunroof is closing from the tilt position then the
sunroof will back off to the fully tilt open position.
These conditions will also activate a message on the
instrument pack which will be accompanied by three
audible beeps.
With the sunroof in the closed or partially tilted open
position, operation of the sunroof forward switch will
cause the roof to operate in the tilt open direction.
This will continue until the switch is released, or until
a stall condition is detected.
If the sunroof back switch is operated while the
sunroof is in the tilt open position, the roof will
operate in the tilt close direction. This will continue
until the switch is released, a trap is detected or until
the sunroof is in the closed position.
If the sunroof back switch is operated with the
sunroof in the closed or partially open position, the
sunroof will operate in the open direction. This
movement will continue until the switch is released
(unless in the one touch mode), the sunroof forward
switch is operated, or a stall condition is detected.
With the sunroof in an open position, operation of the
sunroof forward switch will cause the sunroof to
operate in the close direction. This will continue until
the switch is released (unless in the one touch
mode), the sunroof back switch is operated, a trap is
detected, or until the sunroof is in the fully closed
position.
The heated rear window will be inhibited for the
duration of any sunroof operation.
Market Deviations:
USA/Canada:
the system will only be active when
the auxiliary or ignition feeds are on,
or for the time between switching the
ignition feed off and opening either of
the front doors.
Australia:
the system will only be active
when the ignition switch is in the
auxiliary, the ignition or the crank
position, or for 45 seconds after
the key is removed from the
ignition switch.
SUNROOF
L4
2
CIRCUIT DIAGRAM
See Ground Dis-
tribution
30
F 1
10 A
See Fuse Details
PU
PU
8
C625
11
RU
S612
Interior Lamps
1
5
LG
14
2
OG
2
3
R
13
4
Z238
Body Electrical
Control Module
(BECM)
Z259
Centre Console
Switch Pack
Outstation
[10] Sunroof
Forward
[11] Sunroof
Backward
C626
C614
0
[1]
[2]
0
[3]
[4]
0
[5]
[6]
0
[7]
[8]
0
[9]
0
[10]
[11] 0
[12] 0
[13] 0
[14]
0
[15]
0
[16]
E621
B
6
C614
S607
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст