Defender. Manual — part 244
8. Remove 4 screws and 3 studs securing fender splash shield
to inner wing. Remove fender splash shield.
Installation
1. Position fender splash shield, secure with screws and studs.
2. Fit damper mounting bracket and tighten nuts.
3. Position damper to mounting bracket, fit rubber bush and
washers and tighten nut.
4. Fit damper cover to inner wing and secure with screws.
5. Fit road wheel.
6. Remove stands and lower vehicle.
Front End Body Panels - Hood
Removal and Installation
Removal
1. Remove the hood.
With assistance, remove the hood in an upwards
direction.
Installation
1. To install, reverse the removal procedure.
Make sure the hood guides are inline with the hinge
bracket.
Body Closures - Taildoor Striker Adjustment
General Procedures
1. NOTE: Before adjusting the taildoor striker, ensure the spare
wheel is fitted to taildoor.
Loosen screws securing taildoor striker.
2. Adjust taildoor striker and tighten screws.
3. Close taildoor and check for correct latching with taildoor
lock.
4. Carry out further adjustment as necessary. If full adjustment
cannot be achieved carry out following.
5. Remove taildoor striker and nut plate.
6. Elongate holes in body metal which is sandwiched between
taildoor striker and nut plate.
7. Refit taildoor striker and adjust as necessary.
Body Closures - Door Striker Adjustment
General Procedures
• NOTE: This procedure covers adjustment of striker on front and rear doors.
1. Loosen Torx bolts securing striker to B-pillar or C-pillar.
2. Adjust alignment of striker vertically and horizontally, lightly
tighten bolts.
3. Close door, check for correct latching with door lock and for
centering on striker.
4. Add or remove packing shims as necessary. Fully tighten
bolts.
5. Carry out further adjustment as necessary. If full adjustment
cannot be achieved carry out following:
6. Remove striker and nut plate.
7. Elongate striker bolt holes in B-pillar or C-pillar to increase
movement in direction required.
8. Refit striker and adjust as necessary.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст