Defender. Manual — part 239
Vehicles not fitted with a battery backed sounder are fitted with an anti-theft alarm horn. The anti-theft alarm horn is
located in the RH front fender, behind the headlamp. Power supply to the anti-theft alarm horn is controlled by the anti-
theft system module via a relay located beneath the drivers seat.
If the anti-theft system is triggered, the anti-theft alarm horn will emit either a pulsed or continuous tone depending on
market legislation.
INTRUSION DETECTION MODULE
The intrusion detection module monitors movement within the vehicle cabin. The module is located;
at the top of the RH B pillar on 90/110 station wagons
on the front of the headlining, adjacent the interior mirror on 90/110 pick-ups
on the RH side of the headlining, above the front door on 130 crew cabs.
The intrusion detection module emits a series of ultrasonic sound waves. By measuring the returned sound wave the
intrusion detection module can first determine a 'foot print' of the vehicle cabin, and then determine if movement has
taken place within this area.
The intrusion detection module is connected directly to the anti-theft system module. If movement is detected in the
cabin, the intrusion detection module provides a pulsed voltage signal to the anti-theft module, triggering the alarm.
INSTRUMENT CLUSTER
Item
Part Number
Description
1
-
Anti-theft indicator
The instrument cluster contains the anti-theft indicator. The indicator provides a visual anti-theft system status. When
the anti-theft system is armed, the indicator will flash quickly (8 Hz) for a 10 second period. During this period, the anti-
theft system module will arm the system. After the 10 second period, the indicator will flash slowly (1 Hz), acting as a
deterrent to thieves. Illumination of the anti-theft indicator is controlled by the anti-theft system module.
CONTROL DIAGRAM - BATTERY BACKED SOUNDER
• NOTE: A = Hardwired
Item
Part Number
Description
1
-
Battery
2
-
Hazard flasher switch
3
-
Driver's door switch
4
-
Hood switch
5
-
Front passenger door switch
6
-
RH rear door switch (if fitted)
7
-
LH rear door switch (if fitted)
8
-
Tail door switch
9
-
Diagnostic socket
10
-
Instrument cluster
11
-
Intrusion detection module
12
-
Battery backed sounder
13
-
central junction box (CJB)
14
-
Anti-theft system module
15
-
Ignition switch
16
-
BJB
CONTROL DIAGRAM - ANTI-THEFT ALARM HORN
• NOTE: A = Hardwired
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст