Range Rover Classic. Manual — part 146
CHASSIS AND BODY
7
REPAIR
LOCATION G
LOCATION H
LOCATION
FACTORY JOINT
(minimum weld requirement quoted)
G.
1. Reinforcement plate to dash and tunnel
assembly and body side assembly complete.
CO
2
weld, 2 places 75mm long each weld.
H.
1. Body side complete to roof header panel
assembly (internal joint)
3 spot welds, 15mm pitch
2. Body side complete to roof header panel
assembly (internal joint)
3 spot welds, 15mm pitch
76
CHASSIS AND BODY
8
REPAIR
LOCATION J
LOCATION K
LOCATION
FACTORY JOINT
(minimum weld requirement quoted)
J.
1. Body side complete to rear tailgate frame
assembly
CO
2
weld, one run 40mm long
K.
1. Body side complete to roof header panel
assembly (external joint)
CO
2
weld, one run 20mm long
2. Body side complete to roof header panel
assembly (external joint)
CO
2
weld, one run 100mm long
CHASSIS AND BODY
9
REPAIR
LOCATION L
LOCATION M
LOCATION
FACTORY JOINT
(minimum weld requirement quoted)
L.
1. Body side complete to rear tailgate side
member
32 spot welds, 30mm pitch
M.
1. Body side complete to rear tailgate bottom
cross member
CO
2
weld, 2 runs 40mm long
76
CHASSIS AND BODY
10
REPAIR
LOCATION N
LOCATION
FACTORY JOINT
(minimum number of spot welds quoted)
N.
1. Valance and wheel arch assembly to dash
and tunnel assembly
4 spot welds, 45mm pitch
2. Valance and wheel arch assembly to dash
and tunnel assembly.
15 spot welds, 25mm pitch
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст