Range Rover Sport. Manual — part 86
Release the 4 clips.
Installation
1 . Install the selector lever panel.
Secure the clips.
2 . Install the parking brake switch.
Tighten the screws.
3 . Install the screw cover.
4 . Install the ride and handling optimization switch.
Connect the electrical connectors.
Secure the clips.
5 . Install the selector lever knob.
For additional information, refer to
Selector Lever Knob (44.15.07)
6 . Connect the battery ground cable.
For additional information, refer to
Specifications
Upper Accelerometer (60.60.02)
Special Service Tools
Accelerometer remover/replacer
204-505 (LRT-60-014A)
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to
Specifications
2 . Remove the front overhead console.
Carefully release the 9 clips.
Disconnect the 2 electrical connectors.
3
.
CAUTION: The accelerometer is an extremely delicate component and can easily be rendered
unserviceable. Never use an accelerometer which has been dropped or subjected to mistreatment of any
type.
Remove the upper accelerometer.
Using the special tool, release the accelerometer.
Release and disconnect the electrical connector.
1 . Using the special tool, install the upper accelerometer.
Connect and secure the electrical connector.
2 . Install the front overhead console.
Connect and secure the electrical connectors.
Carefully secure the clips.
3 . Connect the battery ground cable.
For additional information, refer to
Specifications
4 . Using T4, calibrate the dynamic response system.
Lower Accelerometer (60.60.03)
Special Service Tools
Accelerometer remover/replacer
204-505 (LRT-60-014A)
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to
Specifications
2
.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle
on safety stands.
Raise and support the vehicle.
3
.
CAUTION: The accelerometer is an extremely delicate component and can easily be rendered
unserviceable. Never use an accelerometer which has been dropped or subjected to mistreatment of any
type.
Remove the lower accelerometer.
Using the special tool , release the accelerometer.
Release and disconnect the electrical connector.
Installation
1 . Using the special tool, install the lower accelerometer.
Connect and secure the electrical connector.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст