Harley Davidson Touring Models 84-98 FLH, FLHT, FXR. Service manual — page 5

CHAPTER THREE
LUBRICATION, MAINTENANCE AND TUNE-UP
This chapter covers lubrication, maintenance and tune-up procedures. If a procedure requires more than minor disassembly, reference to the appropriate chapter is listed. Maintenance intervals, capacities, recommendations and specification are in Tables 1-13 at the end of this chapter.

To maximize the service life of the motorcycle and gain maximum safety and performance, it is necessary to perform periodic inspections and maintenance. Minor problems found during routine service can be corrected before they develop into major ones.

Consider the maintenance schedule a guide. Harder than normal use and exposure to mud, water or high humidity indicates the need for more frequent servicing to most maintenance items.

ROUTINE SAFETY CHECKS Pre-Ride Inspection

1. Check wheel and tire condition. Check tire pressure. Refer to Tires and Wheels in this section.
2. Make sure all lights work. Refer to Lights and Horn in this section.

3. Check engine, transmission and primary drive chaincase for oil leakage. If necessary, add oil as described in this chapter.

4. Check brake fluid level and condition. If necessary, add fluid as described in this chapter.

5. Check the operation of the front and rear brakes.

6. Check clutch operation. If necessary, adjust the clutch as described in this chapter.

7. Check the throttle operation. The throttle should move smoothly and return quickly when released. If necessary, adjust throttle free play as described in this chapter.

8. Inspect the front and rear suspension. They should have a solid feel with no looseness.

9. Check the exhaust system for leaks or damage.

10. Inspect the fuel system for leaks.

11. Check the fuel level in fuel tank.

12. Check drive belt tension as described in this chapter.

CAUTION When checking the tightness of the exposed fasteners, do not check the cylinder head