Jeep XJ. Manual — part 3
TORQUE SPECIFICATIONS
8
INTRODUCTION
XJ
DESCRIPTION AND OPERATION (Continued)
INTRODUCTION
TABLE OF CONTENTS
page
page
DESCRIPTION AND OPERATION
VEHICLE IDENTIFICATION NUMBER . . . . . . . . . . 1
DESCRIPTION AND OPERATION
VEHICLE IDENTIFICATION NUMBER
DESCRIPTION
The Vehicle Identification Number (VIN) plate is
located on the lower windshield fence near the left
A-pillar. The VIN contains 17 characters that provide
data concerning the vehicle. Refer to the VIN decod-
ing chart to determine the identification of a vehicle.
The
Vehicle
Identification
Number
is
also
imprinted on the:
• Body Code Plate.
• Vehicle Safety Certification Label.
• Frame rail.
To protect the consumer from theft and possible
fraud the manufacturer is required to include a
Check Digit at the ninth position of the Vehicle Iden-
tification Number. The check digit is used by the
manufacturer and government agencies to verify the
authenticity of the vehicle and official documenta-
tion. The formula to use the check digit is not
released to the general public.
VEHICLE IDENTIFICATION NUMBER DECODING CHART
POSITION
INTERPRETATION
CODE = DESCRIPTION
1
Country of Origin
1 = United States
2
Make
J = Jeep
3
Vehicle Type
4 = MPV
4
Gross Vehicle Weight Rating
F = 4001-5000 lbs.
5
Vehicle Line
F = Cherokee 4X4 (LHD)
J = Cherokee 4X4 (RHD) EXPORT
N = Cherokee 4X4 (RHD)
B = Cherokee 4X2 (RHD)
T = Cherokee 4X2 (LHD)
6
Series/Transmission
N = 5 Speed Manual
A = 3 Speed Auto
B = 4 Speed Auto
4 = Sport
6 = Cherokee Country/Limited
5 = Classic
7
Body Style
7 = 2dr Sport Utility
8 = 4dr Sport Utility
8
Engine
M = 2.5L Diesel
P = 2.5L Gasoline
S = 4.0L Gasoline
9
Check Digit
10
Model Year
Y = 2000
11
Assembly Plant
L = Toledo Assembly#1
12 thru 17
Vehicle Build Sequence
XJ
INTRODUCTION
1
2000 JEEP CHEROKEE
E-MARK LABEL
DESCRIPTION
An E-mark Label (Fig. 1) is located on the rear
shut face of the driver’s door. The label contains the
following information:
• Date of Manufacture
• Month-Day-Hour (MDH)
• Vehicle Identification Number (VIN)
• Country Codes
• Regulation Number
• Regulation Amendment Number
• Approval Number
MANUFACTURER PLATE
DESCRIPTION
The Manufacturer Plate (Fig. 2) is located in the
engine compartment on the radiator closure panel
crossmember adjacent to the Body Code Plate. The
plate contains five lines of information:
1. Vehicle Identification Number (VIN)
2. Gross Vehicle Mass (GVM)
3. Gross Train Mass (GTM)
4. Gross Front Axle Rating (GFAR)
5. Gross Rear Axle Rating (GRAR)
Fig. 1 E-Mark Label
1 – Country Code
2 – Regulation Number
3 – Approval Number
4 – Amendment Number
Fig. 2 Manufacturer Plate
2
INTRODUCTION
XJ
DESCRIPTION AND OPERATION (Continued)
2000 JEEP CHEROKEE
LUBRICATION AND MAINTENANCE
TABLE OF CONTENTS
page
page
LUBRICANTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
MAINTENANCE SCHEDULES . . . . . . . . . . . . . . . . . 4
JUMP STARTING, TOWING AND HOISTING . . . . . 9
LUBRICANTS
TABLE OF CONTENTS
page
page
SERVICE PROCEDURES
RECOMMENDATIONS . . . . . . . . . . . . . . . . . . . . 1
INTERNATIONAL SYMBOLS . . . . . . . . . . . . . . . . . 1
CLASSIFICATION OF LUBRICANTS. . . . . . . . . . . . 1
SPECIFICATIONS
FLUID CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . 3
SERVICE PROCEDURES
PARTS AND LUBRICANT RECOMMENDATIONS
RECOMMENDATIONS
When service is required, DaimlerChrysler Corpo-
ration recommends that only Mopar
t brand parts,
lubricants and chemicals be used. Mopar provides
the best engineered products for servicing Daimler-
Chrysler Corporation vehicles.
INTERNATIONAL SYMBOLS
DaimlerChrysler Corporation uses international
symbols to identify engine compartment lubricant
and fluid inspection and fill locations (Fig. 1).
CLASSIFICATION OF LUBRICANTS
Only lubricants bearing designations defined by
the following organization should be used to service a
DaimlerChrysler Corporation vehicle.
• Society of Automotive Engineers (SAE)
• American Petroleum Institute (API) (Fig. 2)
• National Lubricating Grease Institute (NLGI)
(Fig. 3)
ENGINE OIL
SAE VISCOSITY RATING INDICATES ENGINE OIL VISCOSITY
An SAE viscosity grade is used to specify the vis-
cosity of engine oil. SAE 30 specifies a single viscos-
ity
engine
oil.
Engine
oils
also
have
multiple
viscosities. These are specified with a dual SAE vis-
cosity grade which indicates the cold-to-hot tempera-
ture viscosity range.
• SAE 30 = single grade engine oil.
• SAE 10W-30 = multiple grade engine oil.
DaimlerChrysler
Corporation
only
recommends
multiple grade engine oils.
Fig. 1 International Symbols
XJ
LUBRICATION AND MAINTENANCE
0 - 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст