Jeep Grand Cherokee (2023 year). Manual in english — page 13

204

MULTIMEDIA

UCONNECT SETTINGS

The Uconnect system uses a combination of

buttons on the touchscreen and buttons on the

faceplate located on the center of the instrument

panel. These buttons allow you to access and

change the customer programmable features.

Many features can vary by vehicle.
Buttons on the faceplate are located below and/or

beside the Uconnect system in the center of the

instrument panel. In addition, there is a SCROLL/

ENTER control knob located on the right side. Turn

the control knob to scroll through menus and

change settings. Push the center of the control

knob one or more times to select or change a

setting.
Your Uconnect system may also have SCREEN OFF

and MUTE buttons on the faceplate.
Push the SCREEN OFF button on the faceplate to

turn off the Uconnect screen. Push the button

again or tap the screen to turn the screen on.
Press the Back Arrow button to exit out of a Menu

or certain option on the Uconnect system.
Push and hold the Power button on the radio’s

faceplate for a minimum of 15 seconds to reset

the radio.

C

USTOMER

P

ROGRAMMABLE

F

EATURES

Uconnect 5/5 NAV With 10.1-inch Display

Press the Vehicle button, then press the Settings

tab on the top of the touchscreen. In this menu, the

Uconnect system allows you to access all of the

available programmable features.
NOTE:



Only one touchscreen area may be selected at a

time.



Depending on the vehicle’s options, feature

settings may vary.

When making a selection, press the button on the

touchscreen to enter the desired menu. Once in

the desired menu, press and release the preferred

setting option until a check mark appears next to

the setting, showing that setting has been

selected. Once the setting is complete, press the

Vehicle button to exit to the screen. Pressing the

Up or Down Arrow button on the right side of the

screen will allow you to toggle up or down through

the available settings.

1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate

MULTIMEDIA

205

Display

When the Display button is pressed on the touchscreen, the system will display the options related to the theme (if equipped), brightness, and color of the

touchscreen. The available settings are:
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Language

This setting will change the language of the Uconnect system. The available

languages are English, French, Spanish, and Italian.

Display Mode

This setting will allow you to set the brightness manually or have the system

set it automatically. The “Auto” setting has the system automatically adjust

the display brightness. The “Manual” setting will allow the user to adjust the

brightness of the display.

Display Brightness With Headlights ON

This setting will allow you to set the brightness when the headlights are on. To

access this setting, Display Mode must be set to Manual. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Display Brightness With Headlights OFF

This setting will allow you to set the brightness when the headlights are off. To

access this setting, Display Mode must be set to Manual. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Set Theme

This setting will allow you to change the display theme.

Units

This setting will allow you to change the units. The available options are

“Speed” (MPH or km/h), “Distance” (mi or km), “Current Consumption” (MPG

[US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), and

“Temperature” (°C or °F) units of measurement independently.

5

206

MULTIMEDIA

Entertainment Screens

Theme Mode

This setting will allow you to adjust the brightness of your theme. Setting

options are “Light”, “Dark” and “Auto”. Select to show themes in Light or Dark

mode. “Auto” changes the theme with the headlights.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow you to turn the bottom main category bar labels on or off.

Navigation Turn-by-Turn Displayed In Cluster

This setting will display Navigation prompts in the Instrument Cluster Display.

Phone Pop-ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Ready To Drive Pop-ups

This setting will enable the Ready To Drive pop-ups in the Instrument Cluster

Display.

Massage Pop-Up Displayed With Button Press

This setting will activate or deactivate the massage feature pop-ups.

Setting Name

Description

When the Entertainment Screens button is pressed on the touchscreen, the system displays the different options related to the vehicle’s Entertainment.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Passenger Screen Permissions

This setting will enable or disable Passenger Screen Permissions. Options

within this setting are “Navigation”, “Device Manager”, and “Uconnect

Theater”, and each have “On” and “Off” options.

Rear Seat Screen Permissions

This setting will enable or disable your Rear Seat Screen Permissions. “On”

and “Off” options are found within “Navigation”.

MULTIMEDIA

207

My Profile

When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Language

This setting will change the language of the Uconnect system. The available

languages are English, French, Spanish, and Italian.

Display Mode

This setting will allow you to set the brightness manually or have the system

set it automatically. The “Auto” setting has the system automatically adjust

the display brightness. The “Manual” setting will allow the user to adjust the

brightness of the display.

Display Brightness Headlights On

This setting will allow you to set the brightness when the headlights are on. To

access this setting, Display Mode must be set to “Manual”. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Display Brightness Headlights Off

This setting will allow you to set the brightness when the headlights are off. To

access this setting, Display Mode must be set to “Manual”. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Theme Mode

This setting will allow you to adjust the brightness of your theme. Setting

options are “Light”, “Dark” and “Auto”. Select to show themes in Light or Dark

mode. “Auto” changes the theme with the headlights.

Units

This setting will allow you to change the units. The available options are

“Speed” (MPH or km/h), “Distance” (mi or km), “Current Consumption” (MPG

[US], MPG [UK], L/100 km, or km/L), “Pressure” (psi, kPa, or bar), and

“Temperature” (°C or °F) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

5

208

MULTIMEDIA

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

Navigation Turn-by-Turn Displayed In Cluster

This setting will display Navigation prompts in the Instrument Cluster Display.

Phone Pop-Ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Massage Pop-Up Displayed With Button Press

This setting will activate or deactivate the massage feature pop-ups.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS

must be “Off” for this setting to be available. The “12 hrs” setting will set the

time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour

format.

Voice Options

This setting will allow you to change the voice options for the radio to “Male”

or “Female”.

Wake Up Word

This setting will allow you to set the system “Wake Up” word. The available

options are “Off”, “Hey, Uconnect”, and “Hey, Jeep®”.

Voice Barge-in

This setting will allow Voice Barge-in, which is a feature that will allow you to

interrupt the help message or system prompts by speaking, to be turned on or off.

Show Command List

This setting will allow the Command List to be shown on or off.

Navigation Settings

This setting will redirect to the list of Navigation settings. Refer to your

Uconnect Radio Instruction Manual for further information.

Ambient Color Personalization

This setting will redirect to a new menu that will allow you to change the

ambient lighting color in the cabin.

Setting Name

Description

MULTIMEDIA

209

Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel

This setting will activate the vehicle’s comfort system and heated seats or

heated steering wheel when the vehicle is remote started or ignition is

started. The “Off” setting will not activate the comfort systems. The “Remote

Start” setting will only activate the comfort systems when using Remote Start.

The “All Start” setting will activate the comfort systems whenever the vehicle

is started.

Radio Off Delay

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate. The

available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Radio Off With Door

This setting will allow you to determine if the radio shuts off when any of the

doors are opened.

Audio Settings

This setting will open the submenu, containing the audio settings

Ú

page 223.

App Drawer Favoriting Pop-ups

This setting will allow you to favorite app drawer pop-ups with “On” and “Off”

options.

App Drawer Unfavoritings Pop-ups

This setting will allow you to unfavorite app drawer pop-ups with “On” and

“Off” options.

New Text Message Pop-ups

This setting will allow you to have pop-up notifications for new text messages.

Setting options are “On” and “Off”.

Missed Calls Message

This setting will allow you to have pop-up notifications for missed calls. Setting

options are “On” and “Off”.

Navigation Pop-ups

This setting will allow you to have pop-up notifications for Navigation. Setting

options are “On” and “Off”.

Reset App Drawer to Default Order

This setting will reset the app drawer to its factory default layout.

Setting Name

Description

5

210

MULTIMEDIA

Safety & Driving Assistance

Restore Settings to Default

This setting will return all the previously changed settings to their factory

defaults.

More Profile Options

This setting will give access to more profile options.

Setting Name

Description

When the Safety & Driving Assistance button is pressed on the touchscreen, the system displays the options related to the vehicle’s safety settings. These

options will differ depending on the features equipped on the vehicle. The settings may display in list form or within subfolders on the screen. To access a

subfolder, select the desired folder; the available options related to that feature will then display on the screen.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Forward Collision Warning Sensitivity — Located In Automatic Emergency

Braking Submenu

This setting will change the distance at which the Forward Collision Warning

(FCW) alert sounds. The “Medium” setting will have the FCW system signal

when an object is in view, and the possibility of a collision is detected. The

“Near” setting will have the FCW system signal when the object is closer to the

vehicle. The “Far” setting will have the FCW system signal when an object is at

a far distance from the vehicle.

Forward Collision Warning — Located In Automatic Emergency Braking

Submenu

This setting will turn the Forward Collision Warning system on or off. The “Off”

setting will deactivate the FCW system. If “Off” is selected, an Off icon will

display on your Instrument Cluster Display. The “Warning Only” setting will

provide only an audible chime when a collision is detected. The “Warning +

Active Braking” setting will provide an audible chime and apply some brake

pressure when a collision is detected.

MULTIMEDIA

211

Pedestrian Emergency Braking — Located In Automatic Emergency Braking

Submenu

This setting will turn the Pedestrian Emergency Braking system on or off. If

“Off” is selected, an Off icon will display on your Instrument Cluster Display.

Active Driving Assist Steering Wheel Vibration

This setting will turn the Active Driving Assist Steering Wheel Vibration on or off.

Traffic Sign Assist

This setting will turn Traffic Sign Assist on or off.

Traffic Sign Assist Warning

This setting will allow you to set the warning type related to the traffic sign.

The available options are “Off”, “Visual”, and “Visual + Chime”.

Traffic Sign Assist Sensitivity

This setting will change the Traffic Sign Assist Sensitivity. The available

options are “+ 0”, “+ 5”, and “+ 10”.

Traffic Sign Assist Offset

This setting will alter the Traffic Sign Assist Offset. The available options will

allow you to adjust the offset from a range of 0 to 5 mph.

Traffic Sign

Within this setting are three additional settings: “Traffic Sign Blinking” with

“On” and “Off” options, “Traffic Sign Sensitivity” with “+ 0”, “+ 5”, and “+ 10”

options, and “Traffic Sign Information Offset” with selectable options between

0 to 5 mph.

New Speed Zone Indication

This setting will allow you to set if the system will warn you that the speed

limit has changed in an area. The available options are “Off”, “Visual”, and

“Visual + Chime”.

Active Lane Management

This setting will alert the driver when a lane departure is detected. The

available options are “Vibration Only”, “Steering Assist Only”, and “Vibration +

Steering Assist”.

Lane Warning

This setting will let you choose between “Early”, “Medium”, and “Late”.

Vibration Strength

This setting will allow you to change the vibration strength between “Low”,

“Medium”, and “High”.

Steering Assist Strength

This setting will change the strength of the steering wheel feedback during a

lane departure. The available settings are “Low”, “Medium”, and “High”.

Setting Name

Description

5

212

MULTIMEDIA

Night Vision Video Warning

This setting will turn the Night Vision Video Warning and green/gray cluster

indicator light on or off.

ParkSense

This setting will change the type of ParkSense alert when a close object is

detected and can provide both an audible chime and a visual display.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Side Distance Warning

This setting will turn the Side Distance Warning on or off.

Drowsy Driver Detection

This setting will monitor the driver’s driving habits and warn you of any

changes, indicating that the driver may be drowsy. The available options are

“On” and “Off”.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected

in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The

“Lights” setting will activate the Blind Spot Alert lights on the outside mirrors.

The “Lights & Chime” setting will activate the lights on the outside mirrors and

an audible chime.

Electric Power Steering Default

This setting will change the Electric Power Steering Default. The available

options are “Comfort” for a lower effort steering experience, “Normal” for the

standard effort steering experience, and “Sport” for a higher effort steering

experience.

Hill Start Assist

This setting will turn the Hill Start Assist system on or off.

Tire Fill Assist

This setting will turn Tire Fill Assist on or off.

Setting Name

Description

MULTIMEDIA

213

Clock & Date

Rear Seat Alert

When this setting is turned on and the rear doors are opened while the engine is

running, or if the engine is turned on within 10 minutes of the door opening, a

message will appear to check the rear seat when the vehicle is powered OFF.

Setting Name

Description

When the Clock & Date button is pressed on the touchscreen, the system displays the different options related to the vehicle’s internal clock.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Sync Time With GPS

This setting will sync the time to the GPS receiver in the system. The system

will control the time via the GPS location.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS

must be off for this setting to be available. The “12 hrs” setting will set the

time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour

format.

Set Time

This setting will allow you to set the hours and minutes. Sync Time With GPS

must be off for this setting to be available. The “+” setting will increase the

hours or minutes. The “-” setting will decrease the hours or minutes.

Set Date

This setting will allow you to set the day, month and year. Using “+” or “-”, you

can scroll through the available days, months, and years.

Show Time and Date During Screen Off

This setting will allow you to show the time and date while the screen is off.

Available options are “On” and “Off”.

5

214

MULTIMEDIA

Phone/Bluetooth®

Voice

When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio

device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Device Manager

This setting will open the Device Manager main screen.

Do Not Disturb All

This setting will open the Do Not Disturb All settings menu. The available

options are “On” and “Off”.

Enable Two Active Phones

This setting will enable or disable two active phones with the vehicle. The

setting options are “On” and “Off”.

Phone Pop-Ups Displayed In Cluster

This setting will activate phone message pop-ups in the Instrument Cluster

Display.

When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Voice Options

This setting will allow you to change the system’s voice to either “Male” or

“Female”.

MULTIMEDIA

215

Navigation

Camera

Wake Up Word

This setting will allow you to set the system’s “Wake Up” word. The available

options are “Off”, “Hey, Uconnect”, and “Hey, Jeep®”.

Voice Barge-In

This setting allows you to respond to a Voice Response before the statement

is completed by the system. The available options are “On” and “Off”.

Show Command List

This setting will allow you to turn the Command List on or off. The “Always”

setting will always show the Command List. The “With Help” setting will show

the Command List and provide a brief description of what the command does.

The “Never” setting will turn the Command List off.

Setting Name

Description

When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in Navigation system. These settings can

change which icons display on the map, how “time to arrival is calculated”, and route types.
For more information on Navigation and settings, refer to your Uconnect Radio Instruction Manual .

When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Surround View Camera Delay

This setting will add a timed delay to the Surround View Camera when shifting

out of REVERSE.

Surround View Camera Guidelines

This setting will turn the Surround View Camera Guidelines on or off.

5

216

MULTIMEDIA

Mirrors & Wipers

ParkView Backup Camera Delay

This setting will add a timed delay to the ParkView Backup Camera when

shifting out of REVERSE.

ParkView Backup Camera Active Guidelines

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

Forward Facing Camera Guidelines

This setting will turn the Forward Facing Camera Guidelines on or off.

Setting Name

Description

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Tilt Side Mirrors In Reverse

This setting will tilt the outside side-view mirrors when the ignition is in the

ON/RUN position and the transmission gear selector is in the REVERSE

position. The mirrors will move back to their previous position when the

transmission is shifted out of REVERSE. The available settings are “On” and

“Off”.

Auto Folding Side Mirrors

This setting will automatically fold and unfold the side-view mirrors when the

vehicle is turned off, the doors are locked, or the key fob button is pushed.

The available options are “On” and “Off”.

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

Headlights With Wipers

This setting will turn the headlights on when the wipers are activated.

MULTIMEDIA

217

Lights

When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights.
NOTE:



When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country

of the vehicle purchase.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Ambient Color Personalization

This setting will redirect to a new menu that will allow you to change the

ambient lighting color in the cabin.

Headlight Off Delay

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is turned off. The available settings are “0 sec”,

“30 sec”, “60 sec”, and “90 sec”.

Headlight Illumination On Approach

This setting will allow you to set the amount of time it takes for the headlights

to shut off after the vehicle is unlocked. “Greeting Lights” must be selected

and “Headlight Illumination on Approach” must be selected above 0 seconds

for the feature to be enabled. The available settings are “0 sec”, “30 sec”, “60

sec”, and “90 sec”.

Headlights with Wipers

This setting will turn the headlights on when the wipers are activated.

Proximity Wake-Up

This setting will allow you to turn on or off some exterior and interior lighting

illumination when approaching the vehicle.
NOTE:

“Headlight Illumination On Approach” must be set to a value other than zero

for “Proximity Wake-Up” to be active.

5

218

MULTIMEDIA

Brakes

Greeting Lights

When the “Greeting Lights” feature is selected, it enables “Headlight

Illumination On Approach”. When “Headlight Illumination On Approach” is

selected, it allows the adjustment of the amount of time the headlights

remain on after the doors are unlocked with the key fob. “Greeting Lights”

must be selected and “Headlight Illumination On Approach” must be selected

above zero seconds for the feature to be enabled. The available settings are

“On” and “Off”.

Auto Dim High Beams

This setting will allow you to turn the Auto Dim High Beams on or off.

Daytime Running Lights

This setting will allow you to turn the Daytime Running Lights on or off.

Cornering Lights

When this setting is selected, if the steering wheel rotation angle is large or

the turn signal indicators are on, a light (incorporated in the fog light) will turn

on, on the relevant side to improve visibility at night.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock

button is pushed on the key fob on or off.

Setting Name

Description

When the Brakes button is pressed on the touchscreen, the system will display settings related to the vehicle’s brake system.
NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Park Brake

This setting will turn the Auto Park Brake on or off.

Brake Service

This setting will allow you to set the brakes for service. When the setting is

selected, a pop-up will display with “Yes” and “No” options.

MULTIMEDIA

219

Doors & Locks

When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.
NOTE:



The Auto Door Locks feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph

(24 km/h). The Auto Door Locks feature can be enabled or disabled by an authorized dealer per written request of the customer. Please see an authorized

dealer for service.



Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Auto Door Locks

This setting will allow you to change if the doors lock automatically when the

vehicle reaches 15 mph (24 km/h).

Auto Unlock On Exit

This setting will unlock the doors when any of the doors are opened from the

inside.

Flash Lights With Lock

This setting will allow you to turn the flashing of the lights when the Lock

button is pushed on the key fob on or off.

Sound Horn With Lock

This setting will sound the horn when the Lock button is pushed on the key

fob. The “Off” setting will not sound the horn when the Lock button is pushed.

The “1st Press” setting will sound the horn when the Lock button is pushed

once. The “2nd Press” setting will sound the horn when the Lock button is

pushed twice.

Sound Horn With Remote Start

This setting will sound the horn when the remote start is activated from the

key fob.

Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks

This setting will change how many pushes of the Unlock button on the key fob

are needed to unlock all the doors. The “Driver Door” setting will only unlock

the driver door on the first push on the Unlock button. The “All Doors” setting

will unlock all doors with only one push of the Unlock button.

5