Jeep Grand Cherokee WK. Manual — part 1216
SPECIAL TOOLS
5.7L ENGINE
BLOC-CHEK KIT C-3685
Bore Size Indicator C-119
Puller 1023
Crankshaft Damper Installer 8512
CRANKSHAFT DAMPER REMOVER INSERT - 8513-A
Dial Indicator C-3339
Handle C-4171
9 - 1460
ENGINE - 5.7L SERVICE INFORMATION
WK
Oil Pressure Gauge C-3292
Piston Ring Compressor C-385
Pressure Tester Kit 7700
Rear Crankshaft Seal Installer 8349
Rear Crankshaft Seal Remover 8506
Valve Spring Compressor C-3422-B
Valve Spring Tester C-647
WK
ENGINE - 5.7L SERVICE INFORMATION
9 - 1461
Adapter, Valve Spring Compressor Off-vehicle 8464
ENGINE SUPPORT FIXTURE 8534
ENGINE LIFT FIXTURE AND ADAPTER
VALVE SPRING COMPRESSOR 9065A
PUSHROD RETAINING PLATE - 9070
FRONT CRANK SEAL REMOVER - 9071
FRONT CRANK SEAL INSTALLER 9072
9 - 1462
ENGINE - 5.7L SERVICE INFORMATION
WK
AIR INTAKE SYSTEM
REMOVAL
Filter Element Only
NOTE: Always unplug the Charge Air Temperature
sensor before removing the resonater.
Housing removal is not necessary for element (filter)
replacement.
1. Loosen clamp (1) and disconnect air duct (2) at air
cleaner cover.
2. Pry over 4 spring clips (5) from housing cover (3)
(spring clips retain cover to housing).
3. Release housing cover from locating tabs on hous-
ing and remove cover.
4. Remove air cleaner element (filter) from housing.
5. Clean inside of housing before replacing element.
Housing Assembly
NOTE: Always unplug the Charge Air Temperature
sensor before removing the resonater.
1. Loosen clamp and disconnect air duct at air
cleaner cover.
2. Lift entire housing assembly (1)from 4 locating pins
(2).
WK
ENGINE - 5.7L SERVICE INFORMATION
9 - 1463
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст