Jeep Grand Cherokee WK. Manual — part 1282
6. Remove the intermediate shaft (2) mounting nuts
(1) to the bulkhead (The lower nut can be
accessed from the inner fender well and the upper
can be accessed from the top by the master
cylinder).
7. Remove the hush panel (2).
19 - 42
COLUMN - SERVICE INFORMATION
WK
8. Remove the column access cover (2).
9. Remove the pinch bolt at the upper coupling (2) to
the column (1).
WK
COLUMN - SERVICE INFORMATION
19 - 43
10. Slide the shaft forward past the lines and then
upwards.
11. Remove the shaft (1) out from the top by the mas-
ter cylinder (2).
INSTALLATION
1. Install the shaft (1) in from the top by the master
cylinder (2).
2. Slide the shaft forward past the lines and then
upwards.
19 - 44
COLUMN - SERVICE INFORMATION
WK
3. Install a new pinch bolt at the upper coupling (2) to
the column (1).
4. Install the column access cover (2).
WK
COLUMN - SERVICE INFORMATION
19 - 45
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст