Jeep Grand Cherokee WK. Manual — part 1293
SUPPLY HOSE - PUMP TO RESERVOIR
1. Remove the air cleaner assembly.
2. Siphon the power steering fluid from the reservoir.
3. Disconnect the power steering supply hose (2)
from the power steering pump (1).
4. Disconnect the supply hose (2) from the reservoir
(1).
19 - 86
PUMP - SERVICE INFORMATION
WK
PRESSURE LINE - FAN TO PUMP
1. Siphon the power steering fluid from the reservoir.
2. Remove the pressure line at the pump.
3. Raise and support the vehicle.
4. Remove the front skid plate.
5. Disconnect the electrical connector (6) for the pres-
sure switch (1).
6. Remove the quick connect pressure line (5) from
the hydraulic cooling fan filter (2) using special tool
8875-A (3).
7. Remove the pressure line (5) from the vehicle.
8. Remove the pressure switch (1) if necessary.
REMOVAL
1. Drain the power steering fluid out of the reservoir.
2. Remove the hood weather-strip seal (2) at the radi-
ator cowl.
3. Remove the 6 grille push pins (1).
WK
PUMP - SERVICE INFORMATION
19 - 87
4. Remove the radiator core support (1).
5. Install tool 8875-A to remove the quick connect line
from the fluid cooler (4).
6. Remove the radiator, A/C assembly mounting bolts
(1).
7. Move the radiator, A/C assembly toward the front of
the vehicle to gain access in order to remove the
line.
19 - 88
PUMP - SERVICE INFORMATION
WK
8. Raise and support the vehicle.
9. Remove the clamp (2) to the fluid line (3) at the
radiator.
10. Remove the line (1) from the front of the vehicle
by rotating the line in order to clear components.
WK
PUMP - SERVICE INFORMATION
19 - 89
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст