Jeep Grand Cherokee WK. Manual — part 252
U0019–CAN B BUS (CONTINUED)
3.
CAN B BUS (+) CIRCUIT OPEN
Turn the ignition off.
Disconnect the Amplifier harness connector.
Disconnect the Front Control Module C1 harness connector.
Measure the resistance of the (D55) Can B Bus (+) circuit between the
Front Control Module C1 harness connector and the Amplifier harness
connector.
Is the resistance below 2.0 ohms?
Yes
>> Go To 4
Perform BODY VERIFICATION TEST - VER 1.
No
>> Repair the Can B Bus (+) circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
8A - 144
AUDIO/VIDEO SYSTEMS - ELECTRICAL DIAGNOSIS
WK
U0019–CAN B BUS (CONTINUED)
4.
CAN B BUS (–) CIRCUIT OPEN
Measure the resistance of the (D54) Can B Bus (–) circuit between the
Front Control Module C1 harness connector and the Amplifier harness
connector.
Is the resistance below 2.0 ohms?
Yes
>> Replace the Amplifier in accordance with the service infor-
mation..
Perform BODY VERIFICATION TEST - VER 1.
No
>> Repair the Can B Bus (–) circuit for an open.
Perform BODY VERIFICATION TEST - VER 1.
WK
AUDIO/VIDEO SYSTEMS - ELECTRICAL DIAGNOSIS
8A - 145
U0020-CAN B BUS OFF PERFORMANCE
For the Amplifier circuit diagram (Refer to 8 - ELECTRICAL/AUDIO - SCHEMATICS AND DIAGRAMS).
For a complete wiring diagram Refer to Section 8W.
8A - 146
AUDIO/VIDEO SYSTEMS - ELECTRICAL DIAGNOSIS
WK
U0020-CAN B BUS OFF PERFORMANCE (CONTINUED)
WK
AUDIO/VIDEO SYSTEMS - ELECTRICAL DIAGNOSIS
8A - 147
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст