Jeep Grand Cherokee WK. Manual — part 82
17. Remove lower control arms (1) from axle brackets
(2).
18. Lower axle from vehicle and remove coil springs
and insulators.
INSTALLATION
1. Install coil springs and insulators. Raise axle into
position.
2. Install lower control arms (1) to axle brackets (2).
3 - 226
REAR AXLE - C213RE
WK
3. Install upper control arms (2) to axle brackets (1).
4. Install shock absobers (1) to axle brackets (2).
WK
REAR AXLE - C213RE
3 - 227
5. Install stabilizer bar (1) and clamps (2) to axle.
6. Install propeller shaft.
7. Install axle vent hose (1) to axle vent (2) and cover
bracket.
3 - 228
REAR AXLE - C213RE
WK
8. Install axle shaft (1) into axle tube and backing
plate with new o-ring on axle.
9. Slip O-ring (2) through backing plate, then push
axle through backing plate until bearing (1) is
exposed.
10. Install O-ring (2) on axle bearing.
WK
REAR AXLE - C213RE
3 - 229
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст