Jeep Grand Cherokee WK. Manual — part 1211

9. Remove

the

A/C

compressor

with

the

lines

attached. Secure compressor out of the way.

10. Remove generator assembly (Refer to 8 - ELEC-

TRICAL/CHARGING/GENERATOR - REMOVAL).

11. Remove the intake manifold and IAFM as an

assembly (Refer to 9 - ENGINE/MANIFOLDS/IN-
TAKE MANIFOLD - REMOVAL).

12. Remove the ground wires from the rear of each

cylinder head.

9 - 1440

ENGINE - 5.7L SERVICE INFORMATION

WK

13. Disconnect the heater hoses (1).

WK

ENGINE - 5.7L SERVICE INFORMATION

9 - 1441

NOTE: It is not necessary to disconnect P/S hoses
from pump, for P/S pump removal.

14. Remove the power steering pump and set aside.

15. Disconnect the fuel supply line (Refer to 14 -

FUEL SYSTEM/FUEL DELIVERY/QUICK CON-
NECT FITTING - STANDARD PROCEDURE).

16. Raise and support the vehicle on a hoist and

drain the engine oil.

17. Remove engine front mount to frame bolts (3) and

nuts.

18. Disconnect the transmission oil cooler lines from

their retainers at the oil pan bolts.

19. Disconnect exhaust pipe at manifolds.

20. Disconnect the starter wires. Remove starter

motor (1) (Refer to 8 - ELECTRICAL/STARTING/
STARTER MOTOR - REMOVAL).

9 - 1442

ENGINE - 5.7L SERVICE INFORMATION

WK

21. Remove the structural dust cover (1).

22. Remove drive plate to converter bolts.

WK

ENGINE - 5.7L SERVICE INFORMATION

9 - 1443