Jeep Grand Cherokee WK. Manual — part 203
ACCESSORY DRIVE
TABLE OF CONTENTS
page
page
TENSIONERS-BELT
. . . . . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . 22
. . . . . . . . . . . . . . . . . . . . . . . . . 22
BELTS-DRIVE
. . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . 26
. . . . . . . . . . . . . . . . . . . . . . . . . 26
. . . . . . . . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . . . . . . . 28
. . . . . . . . . . . . . . . . . . . . . . . . . 29
TENSIONERS-BELT
REMOVAL
3.7L ENGINE
1. Remove accessory drive belt (Refer to 7 - COOL-
ING/ACCESSORY
DRIVE/DRIVE
BELTS
-
REMOVAL).
2. Remove tensioner assembly from engine front
cover.
WARNING: BECAUSE OF HIGH SPRING TENSION,
DO NOT ATTEMPT TO DISASSEMBLE AUTOMATIC
TENSIONER. UNIT IS SERVICED AS AN ASSEM-
BLY (EXCEPT FOR PULLEY ON TENSIONER).
7 - 18
ACCESSORY DRIVE
WK
4.7L ENGINE
1. Remove accessory drive belt (Refer to 7 - COOL-
ING/ACCESSORY
DRIVE/DRIVE
BELTS
-
REMOVAL).
2. Remove tensioner assembly from engine front
cover.
WARNING: BECAUSE OF HIGH SPRING TENSION,
DO NOT ATTEMPT TO DISASSEMBLE AUTOMATIC
TENSIONER. UNIT IS SERVICED AS AN ASSEM-
BLY (EXCEPT FOR PULLEY ON TENSIONER).
5.7L ENGINE
1. Remove accessory drive belt (Refer to 7 - COOL-
ING/ACCESSORY
DRIVE/DRIVE
BELTS
-
REMOVAL).
2. Remove bolt and tensioner assembly.
WK
ACCESSORY DRIVE
7 - 19
3.0L DIESEL
1. Disconnect negative battery cable.
2. Remove accessory drive belt (Refer to 7 - COOL-
ING/ACCESSORY
DRIVE/DRIVE
BELTS
-
REMOVAL).
3. Remove belt tensioner retaining bolt and remove
tensioner from bracket.
7 - 20
ACCESSORY DRIVE
WK
INSTALLATION
3.7L ENGINE
1. An indexing slot is located on back of tensioner.
Align this slot to the head of the bolt on the front
cover. Install the mounting bolt. Tighten bolt to 41
N·m (30 ft. lbs.).
2. Install drive belt (Refer to 7 - COOLING/ACCES-
SORY DRIVE/DRIVE BELTS - INSTALLATION).
3. Check belt indexing marks (Refer to 7 - COOLING/
ACCESSORY
DRIVE/DRIVE
BELTS
-
INSTALLATION).
4.7L ENGINE
1. An indexing slot is located on back of tensioner.
Align this slot to the head of the bolt on the front
cover. Install the mounting bolt. Tighten bolt to 41
N·m (30 ft. lbs.).
2. Install drive belt (Refer to 7 - COOLING/ACCES-
SORY DRIVE/DRIVE BELTS - INSTALLATION).
3. Check belt indexing marks (Refer to 7 - COOLING/
ACCESSORY
DRIVE/DRIVE
BELTS
-
INSTALLATION).
WK
ACCESSORY DRIVE
7 - 21
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст