Jeep Wagoneer (2022 year). Manual in english — page 2
GETTING TO KNOW YOUR VEHICLE
29
The ultrasonic intrusion sensor (motion
detector) actively monitors your vehicle every
time you arm the Vehicle Security system. If you
prefer, you can turn off the ultrasonic intrusion
sensor when arming the security system. To do
so, push the lock button on the key fob four
times within 15 seconds of arming the system
(while the Vehicle Security Light is flashing
rapidly).
The Vehicle Security system is designed to protect
your vehicle; however, you can create conditions
where the system will give you a false alarm. If one
of the previously described arming sequences has
occurred, the Vehicle Security system will arm
regardless of whether you are in the vehicle or not.
If you remain in the vehicle and open a door, the
alarm will sound. If this occurs, disarm the Vehicle
Security system.
If the Vehicle Security system is armed and the
battery becomes disconnected, the Vehicle
Security system will remain armed when the
battery is reconnected; the exterior lights will flash,
the horn will sound. If this occurs, disarm the
Vehicle Security system.
S
ECURITY
S
YSTEM
M
ANUAL
O
VERRIDE
The Vehicle Security system will not arm if you lock
the doors using the manual door lock, or an
DOORS
M
ANUAL
D
OOR
L
OCKS
The front doors can be manually unlocked with a
single pull of the inside door handle. The driver’s
door can also be manually locked/unlocked by
inserting the emergency key into the lock cylinder
on the outside door handle.
Driver’s Door Cylinder Lock
The rear doors can be manually unlocked with a
double pull of the inside door handle.
All doors except the driver’s door can be manually
locked by inserting the emergency key into the
emergency lock lever and sliding the lever upward.
The emergency lock lever is located on the door
latch face of each door.
Emergency Lock Lever
NOTE:
The emergency lock lever is only accessible
when the door is open.
Manually locking the vehicle will not arm the
Vehicle Security system.
2
30
GETTING TO KNOW YOUR VEHICLE
P
OWER
D
OOR
L
OCKS
The power door lock buttons are located on each
front door panel. Push the lock button to lock all
doors and liftgate, or the unlock button to unlock
all doors and liftgate.
When the doors are locked, an indicator light in the
lock button will illuminate.
Power Door Lock Switches
The driver’s door will unlock automatically if the
keys are detected inside the vehicle when the door
lock button on the front door panel is used to lock
the door. This will occur for two attempts. Upon the
third attempt, the doors will lock even if the key is
inside.
NOTE:
If the key fob is located next to a mobile phone,
laptop, or other electronic device, the wireless
signal may get blocked, and the driver’s door may
not unlock automatically.
If the door lock switch is pushed while the ignition
is in ON/RUN and the driver's door is open, the
doors will not lock.
Rear Passenger Power Door Locks
Power door lock buttons are located on each rear
door trim panel. Push the lock button to lock all
doors and liftgate, and the unlock button to unlock
all doors and liftgate.
P
OWER
S
IDE
S
TEPS
— I
F
E
QUIPPED
The Power Side Steps will extend for easier entry
and exit of the vehicle.
When configured for “Auto” mode, the Power Side
Steps will deploy when any of the doors are
opened, and they will retract when the doors are
closed. This mode can be turned on or off in the
If the vehicle speed exceeds 5 mph (8 km/h), the
steps will retract.
WARNING!
For personal security and safety in the event
of a collision, lock the vehicle doors before you
drive as well as when you park and leave the
vehicle.
When exiting the vehicle, always make sure
the ignition is in the OFF position, remove the
key fob from the vehicle and lock your vehicle.
Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing chil
-
dren to be in a vehicle unattended is
dangerous for a number of reasons. A child or
others could be seriously or fatally injured.
Children should be warned not to touch the
parking brake, brake pedal or the gear
selector.
Do not leave the key fob in or near the vehicle,
or in a location accessible to children, and do
not leave the Keyless Enter ‘n Go™ Ignition in
the ON/RUN position. A child could operate
power windows, other controls, or move the
vehicle.
GETTING TO KNOW YOUR VEHICLE
31
K
EYLESS
E
NTER
‘
N
G
O
™ — P
ASSIVE
E
NTRY
The Passive Entry system is an enhancement to
the vehicle’s Remote Keyless Entry (RKE) system
and a feature of Keyless Enter ‘n Go™. This feature
allows you to lock and unlock the vehicle’s door(s)
without having to push the key fob lock or unlock
buttons.
If equipped, the rear doors will also have Passive
Entry capabilities.
NOTE:
Passive Entry may be programmed on/off
The key fob may not be detected by the vehicle
Passive Entry system if it is located next to a
mobile phone, laptop or other electronic device;
these devices may block the key fob's wireless
signal and prevent the Passive Entry handle
from locking/unlocking the vehicle.
Passive Entry Unlock initiates illuminated
approach (low beams, license plate lamp,
parking lights, door handle pocket lights [if
equipped]) for whichever time duration is set
between 0, 30, 60 or 90 seconds. Passive Entry
Unlock also initiates two flashes of the turn
signal lamps.
If wearing gloves, or if it has been raining/
snowing on the Passive Entry door handle, the
unlock and lock sensitivity can be affected,
resulting in a slower response time.
The doors may lock and unlock when water is
sprayed on the Passive Entry door handles, if
the key fob is located outside of the vehicle
within 5 ft (1.5 m) of the handle.
Passive Entry lock initiates one horn chirp and
one flash of turn signal lights. These settings
can be programmed on/off within Uconnect
If the vehicle is unlocked by Passive Entry and
no door is opened within 60 seconds, the
vehicle will relock and will arm the Vehicle Secu
-
rity system (if equipped).
To Unlock From The Driver Or Passenger Side
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the door handle, grab the handle to
unlock the vehicle. Grabbing the driver’s door
handle will unlock the driver door automatically.
Grabbing the front passenger door handle (or a
rear handle when equipped with four-door Passive
Entry) will unlock all doors and the liftgate
automatically.
Grab The Door Handle To Unlock
NOTE:
Either the driver’s door only or all doors will
unlock when you grab hold of the front driver’s
door handle, depending on the selected setting
All doors will unlock when the front passenger
(or a rear door when equipped with four door
Passive Entry) door handle is grabbed regard
-
less of the driver’s door unlock preference
setting.
Frequency Operated Button Integrated Key
(FOBIK-Safe)
To minimize the possibility of unintentionally
locking a Passive Entry key fob inside your vehicle,
the Passive Entry system is equipped with an
automatic door unlock feature which will function if
the ignition switch is in the OFF position.
2
32
GETTING TO KNOW YOUR VEHICLE
There are five situations that trigger a FOBIK-Safe
search in any Passive Entry vehicle:
A lock request is made by a valid Passive Entry
key fob while a door is open.
A lock request is made by the Passive Entry door
handle while a door is open.
A lock request is made by the door panel switch
while the door is open.
When the Vehicle Security system is in pre-arm
or armed status and the liftgate transitions from
opened to closed.
When the liftgate transitions from open to
closed and Remote Start is active.
When any of these situations occur, after all open
doors are shut, the FOBIK-Safe search will be
executed. If it detects a Passive Entry key fob
inside the vehicle, the vehicle will unlock and alert
the customer.
NOTE:
The vehicle will only unlock the doors when a valid
Passive Entry key fob is detected inside the
vehicle. The vehicle will not unlock the doors when
any of the following conditions are true:
The doors are manually locked using the emer
-
gency lock lever.
Three attempts are made to lock the doors
using the door panel switch and then the doors
are closed.
There is a valid Passive Entry key fob outside the
vehicle within 5 ft (1.5 m) of a Passive Entry
door handle.
To Lock The Vehicle’s Doors And Liftgate
With one of the vehicle’s Passive Entry key fobs
within 5 ft (1.5 m) of a Passive Entry door handle,
touch the lock icon on the door handle to lock all
four doors and liftgate.
Touch The Door Handle Lock Icon To Lock
NOTE:
Do NOT grab the door handle when touching the
lock icon. This could unlock the door(s).
Do NOT Grab The Door Handle When Locking
NOTE:
After touching the door handle lock icon, you
must wait two seconds before you can lock or
unlock the doors using any Passive Entry door
handle. This is done to allow you to check if the
vehicle is locked by pulling the door handle,
without the vehicle unlocking.
If Passive Entry is disabled using the Uconnect
Settings, the key protection described in
"Frequency Operated Button Integrated Key
(FOBIK-Safe)" remains active/functional.
The Passive Entry system will not operate if the
key fob battery is depleted.
GETTING TO KNOW YOUR VEHICLE
33
To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built
into the electronic liftgate release button. With a
valid Passive Entry key fob within 5 ft (1.5 m) of the
liftgate, push the electronic liftgate release handle
for a power open on vehicles equipped with Power
Liftgate. Push the electronic liftgate button and lift
for Manual Liftgate vehicles.
Electronic Liftgate Handle
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, push the Passive Entry lock
button located on the outside liftgate door handle.
NOTE:
The liftgate Passive Entry lock button will lock all
A
UTOMATIC
U
NLOCK
D
OORS
O
N
E
XIT
The doors will unlock automatically on vehicles
with power door locks after the following sequence
of actions:
1. The Automatic Unlock Doors On Exit feature is
enabled within Uconnect Settings
2. All doors are closed.
3. The gear selector was not in PARK, then is
placed in PARK.
4. Any door is opened.
A
UTOMATIC
D
OOR
L
OCKS
—
I
F
E
QUIPPED
The auto door lock feature default condition is
enabled. When enabled, the door locks will lock
automatically when the vehicle's speed exceeds
15 mph (24 km/h). The auto door lock feature is
enabled or disabled by an authorized dealer per
written request of the customer. Please see an
authorized dealer for service.
C
HILD
-P
ROTECTION
D
OOR
L
OCK
S
YSTEM
— R
EAR
D
OORS
To provide a safer environment for small children
riding in the rear seats, the rear doors are
equipped with a Child-Protection Door Lock
system.
To use the system, open each rear door, use a flat
blade screwdriver (or emergency key) and rotate
the dial to the lock or unlock position. When the
system on a door is engaged, that door can only be
opened by using the outside door handle even if
the inside door lock is in the unlocked position.
Child-Protection Door Lock Function
1 — Lock Button Location
2 — Electronic Liftgate Release Handle
2
34
GETTING TO KNOW YOUR VEHICLE
NOTE:
When the Child-Protection Door Lock system is
engaged, the door can be opened only by using
the outside door handle even though the inside
door lock is in the unlocked position.
After disengaging the Child-Protection Door
Lock system, always test the door from the
inside to make certain it is in the unlocked posi
-
tion.
After engaging the Child-Protection Door Lock
system, always test the door from the inside to
make certain it is in the locked position.
NOTE:
Always use this device when carrying children.
After engaging the child lock on both rear doors,
check for effective engagement by trying to open a
door with the internal handle. Once the
Child-Protection Door Lock system is engaged, it is
impossible to open the doors from inside the
vehicle. Before getting out of the vehicle, be sure to
check that there is no one left inside.
STEERING WHEEL
P
OWER
T
ILT
/T
ELESCOPING
S
TEERING
C
OLUMN
This feature allows you to tilt the steering column
upward or downward. It also allows you to lengthen
or shorten the steering column. The power tilt/
telescoping steering column control is located
below the multifunction lever on the steering
column.
Power Tilt/Telescoping Steering Control Location
Use the four-way control to adjust the steering
column.
NOTE:
For vehicles equipped with Driver Memory
Settings, you can use your key fob or the memory
switch on the driver's door trim panel to return the
tilt/telescopic steering column to saved positions
H
EATED
S
TEERING
W
HEEL
The steering wheel contains a heating
element that helps warm your hands in
cold weather. The heated steering wheel
has three temperature settings. Once
the heated steering wheel has been turned on, it
will stay on until the operator turns it off. The
heated steering wheel may not turn on when it is
already warm.
WARNING!
Avoid trapping anyone in a vehicle in a collision.
Remember that the rear doors can only be
opened from the outside with the
Child-Protection locks engaged (locked).
WARNING!
Do not adjust the steering column while driving.
Adjusting the steering column while driving or
driving with the steering column unlocked, could
cause the driver to lose control of the vehicle.
Failure to follow this warning may result in
serious injury or death.
GETTING TO KNOW YOUR VEHICLE
35
The heated steering wheel control button is
located on the side of the radio screen or within the
Uconnect system. You can gain access to the
control button through the controls screen of the
touchscreen. If your vehicle is not equipped with
the button on the side of the radio, you can also
access the control button through the climate
screen.
Push the heated steering wheel button once to
turn the HI setting on.
Push the heated steering wheel button a second
time to turn the MED setting on.
Push the heated steering wheel button a third
time to turn the LO setting on.
Push the heated steering wheel button a fourth
time to turn the heating elements off.
NOTE:
The engine must be running for the heated
steering wheel to operate.
For information on use with the Remote Start
DRIVER AND PASSENGER MEMORY
SETTINGS — IF EQUIPPED
This feature allows the driver, and if equipped, also
the front passenger to save up to two different
memory profiles for easy recall through a memory
switch. Each memory profile saves desired position
settings for the following features:
Driver’s Side
Seat position
Easy entry/exit seat (if equipped)
Side mirrors
Power tilt and telescopic steering column
(if equipped)
Power adjustable pedals (if equipped)
A set of desired radio station presets
Passenger’s Side (If Equipped)
Seat position
The memory settings switches are located on the
front door panels, next to the door handle, and
consists of two or three buttons, depending on trim
level:
The (1) and (2) buttons which are used to recall
either of two saved memory profiles
The set (S) button (Wagoneer models only),
which is used to activate the memory save
function
WARNING!
Persons who are unable to feel pain to the
skin because of advanced age, chronic illness,
diabetes, spinal cord injury, medication,
alcohol use, exhaustion, or other physical
conditions must exercise care when using the
steering wheel heater. It may cause burns
even at low temperatures, especially if used
for long periods.
Do not place anything on the steering wheel
that insulates against heat, such as a blanket
or steering wheel covers of any type and mate
-
rial. This may cause the steering wheel heater
to overheat.
2
36
GETTING TO KNOW YOUR VEHICLE
Wagoneer Memory Settings Buttons
Grand Wagoneer Memory Settings Buttons
NOTE:
Your vehicle is equipped with two key fobs, each
can be linked to either driver’s side memory
position 1 or 2.
Front passenger memory settings cannot be
linked to a key fob.
P
ROGRAMMING
T
HE
M
EMORY
F
EATURE
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase the
selected profile from memory.
Wagoneer
1. Place the vehicle’s ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt
and telescopic steering column [if equipped],
and radio station presets).
3. Push and release the set (S) button on the
memory switch.
4. Within five seconds, push and release either of
the memory buttons (1) or (2). The instrument
cluster display will display which memory
position has been set.
Grand Wagoneer
1. Place the vehicle’s ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt
and telescopic steering column [if equipped],
and radio station presets).
3. Press memory button (1) or (2) for two or more
seconds. The instrument cluster display will
display which memory position has been set.
NOTE:
Memory profiles can be set without the vehicle in
PARK, but the vehicle must be below 5 mph
(8 km/h) to recall a memory profile.
L
INKING
A
ND
U
NLINKING
T
HE
K
EY
F
OB
T
O
M
EMORY
Your key fobs can be programmed to recall one of
two saved driver’s side memory profiles.
NOTE:
Before programming your key fobs you must select
the “Personal Settings Linked To Key Fob” feature
To program your key fobs, perform the following:
Wagoneer
1. Place the vehicle’s ignition in the OFF
position.
2. Select a desired driver’s side memory profile,
1 or 2.
3. Once the profile has been recalled, push and
release the set (S) button on the memory
switch.
GETTING TO KNOW YOUR VEHICLE
37
(Continued)
4. Within five seconds, push and release button
(1) or (2) accordingly. “Memory Profile Set”
(1 or 2) will display in the instrument cluster.
5. Push and release the lock button on the key
fob within 10 seconds.
NOTE:
Your key fobs can be unlinked from your driver’s
side memory settings by pushing the set (S) button,
and within 10 seconds, pushing the unlock button
on the key fob.
Grand Wagoneer
1. Place the vehicle’s ignition in the OFF
position.
2. Recall the desired memory profile (1 or 2).
3. Press the memory button (1) or (2) (according
to the previous selection) for two seconds or
more, and release.
4. Push and hold the lock button on the key fob
within 10 seconds.
NOTE:
Your key fobs can be unlinked from your driver’s
side memory settings by pushing the memory
button (1) or (2) for two seconds or more and
releasing, and then within 10 seconds, pushing
and holding the unlock button on the key fob.
M
EMORY
P
OSITION
R
ECALL
NOTE:
Memory Recall is available when not in PARK, if the
vehicle speed is below 5 mph (8 km/h).
To recall a memory settings using the memory
switches, push memory button (1) or (2) on the
memory switch.
To recall the driver’s side memory settings using
the key fob, push the unlock button on the key
fob linked to memory position 1 or 2.
A recall can be canceled by pushing any of the
memory buttons during a recall, or by pushing any
of the seat adjustment switches. When a recall is
canceled, the seat and power tilt/telescopic
steering column will stop moving. A delay of one
second will occur before another recall can be
selected.
SEATS
Seats are a part of the Occupant Restraint system
of the vehicle.
M
ANUAL
A
DJUSTMENT
(R
EAR
S
EATS
)
NOTE:
You may experience deformation in the seat
cushion from the seat belt buckles if the seats are
left folded for an extended period of time. This is
normal and by simply unfolding the seats to the
open position, over time the seat cushion will
return to its normal shape.
WARNING!
It is dangerous to ride in a cargo area, inside
or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri
-
ously injured or killed.
Do not allow people to ride in any area of your
vehicle that is not equipped with seats and
seat belts. In a collision, people riding in
these areas are more likely to be seriously
injured or killed.
Be sure everyone in your vehicle is in a seat
and using a seat belt properly.
WARNING!
Do not pile luggage or cargo higher than the top
of the seatback. This could impair visibility or
become a dangerous projectile in a sudden stop
or collision.
WARNING!
2
38
GETTING TO KNOW YOUR VEHICLE
Second Row Bench Seat — If Equipped
SECOND ROW BENCH SEAT FORWARD/REAR
-
WARD ADJUSTMENT
Lift up on the adjusting bar located at the front of
the seat near the floor and release it when the seat
is at the desired position. Then, using body
pressure, move forward and rearward on the seat
to be sure that the seat adjusters have latched.
Rear Seat Adjustment Bar
SECOND ROW BENCH SEAT RECLINE
ADJUSTMENT
To recline, lean forward slightly and lift the lever
located on the outboard side of the seat. Then,
push the seat rearward to the desired position and
release the lever. To return the seatback to its
normal position, lean forward and lift the lever. To
ensure the seatback is latched, use body pressure
to lean forward and rearward.
Rear Seat Recline Lever
To recline the center seat, pull the recline strap
located on the seatback, and move forward or
backward as desired. Release the strap when the
desired seat position has been reached.
Center Seat Recline Strap
SECOND ROW BENCH FOLD FLAT SEAT
To provide additional storage area, each rear seat
can be folded flat. This allows for extended cargo
space and still maintains some rear seating room.
NOTE:
Prior to folding the rear seat, it may be necessary
to position the front seat to its mid-track position
especially if the seat is equipped with Rear Seat
Entertainment. Also, be sure that the front seats
are fully upright and positioned forward. This will
allow the rear seat to fold down easily.
To lower the seatback, pull upward on the recline
lever located on the outboard side of the seat, and
let the seatback fold forward automatically.
WARNING!
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide under
the seat belt, which could result in serious injury
or death.
GETTING TO KNOW YOUR VEHICLE
39
Second Row Bench Seat Folded Flat
To lower the center seatback, pull the recline strap,
located on the left side of the seatback, and let the
seatback fold forward automatically.
Center Seat Recline Strap
To raise the seatback, fold the seatback up into its
original position and lock it into place.
SECOND ROW BENCH SEAT EASY ACCESS FOR
THIRD ROW
The second row bench seats can slide forward to
allow passengers to easily access the third row
seats.
Press the easy entry button located on the
outboard side of the seatback. Once pressed, the
seat will pitch forward, allowing the seat to slide
forward.
Bench Seat Easy Entry Button
To return the seat to a sitting position, push the
seatback rearward until the seat locks.
Emergency Straps
In the event that the vehicle loses power, the Easy
Entry buttons will not function. There are
emergency straps located on the back of the
second row outboard seats to allow the third row
occupants to manually fold the seats flat to exit the
vehicle.
Emergency Straps
Pull the emergency straps to fold the second row
seat flat.
WARNING!
Be certain that the seatback is securely locked
into position. If the seatback is not securely
locked into position the seat will not provide the
proper stability for child seats and/or
passengers. An improperly latched seat could
cause serious injury.
2
40
GETTING TO KNOW YOUR VEHICLE
Second Row Captain’s Chairs —
If Equipped
SECOND ROW CAPTAIN’S CHAIRS FORWARD/
REARWARD ADJUSTMENT
Lift up on the adjusting bar located at the front of
the seat near the floor and release it when the seat
is at the desired position. Then, using body
pressure, move forward and rearward on the seat
to be sure that the seat adjusters have latched.
Rear Seat Adjustment Bar
SECOND ROW CAPTAIN’S CHAIRS RECLINE
ADJUSTMENT
To recline, lean forward slightly and lift the lever
located on the outboard side of the seat. Then,
push the seat rearward to the desired position and
release the lever. To return the seatback to its
normal position, lean forward and lift the lever. To
ensure the seatback is latched, use body pressure
to lean forward and rearward.
Rear Seat Recline Lever
SECOND ROW CAPTAIN’S CHAIRS FOLD FLAT
SEATS
The second row seatbacks can be folded flat to
carry cargo.
NOTE:
Prior to folding the rear seat, it may be necessary
to position the front seat to its mid-track position
especially if the seat is equipped with Rear Seat
Entertainment. Also, be sure that the front seats
are fully upright and positioned forward. This will
allow the rear seat to fold down easily.
Pull upward on the recline lever located on the
outboard side of each second row seat, and let the
seatback fold forward automatically.
Second Row Captain’s Chair Folded Flat
To Raise The Rear Seats
Fold the seatbacks upward to their original
position, and lock them into place.
WARNING!
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide under
the seat belt, which could result in serious injury
or death.
GETTING TO KNOW YOUR VEHICLE
41
SECOND ROW CAPTAIN’S CHAIR EASY ACCESS
FOR THIRD ROW
The second row captain’s chairs can slide forward
to allow passengers to easily access the third row
seats.
Press the easy entry button located on the
outboard side of the seatback. Once pressed, the
entire seat will pitch forward, allowing the seat to
slide forward.
Captain’s Chair Easy Entry Button
To return the seat to a sitting position, push the
seatback rearward until the seat locks.
Emergency Straps
In the event that the vehicle loses power, the Easy
Entry buttons will not function. There are
emergency straps located on the back of the
second row outboard seats to allow the third row
occupants to manually fold the seats flat to exit the
vehicle.
Emergency Straps
Pull the emergency straps to fold the second row
seat flat.
Folding Third Row
Both third row seats can be folded flat to increase
the cargo area. To lower either seat, pull on the
release straps located on both sides of the rear
cargo area, near the bottom of the seat.
NOTE:
The second row seats must be in their full upright
position or folded flat when folding the third row
seats.
Release Straps
WARNING!
Be certain that the seatback is securely locked
into position. If the seatback is not securely
locked into position the seat will not provide the
proper stability for child seats and/or
passengers. An improperly latched seat could
cause serious injury.
2
42
GETTING TO KNOW YOUR VEHICLE
Third Row Folded
To raise the seat, pull the seatback up and push
back to lock it into place. You can also use the
return straps in the rear cargo area, on the back of
the seat.
Return Straps
To recline the seat, pull the recline straps, located
on the sides of the seat.
Recline Straps
P
OWER
A
DJUSTMENT
(F
RONT
S
EATS
) —
I
F
E
QUIPPED
Wagoneer models will be equipped with 8-way
power driver and front passenger seats. The power
seat switches are located on the outboard side of
the seat. There are two switches that control the
movement of the seat cushion and the seatback.
Wagoneer Power Seat Switches
WARNING!
Be certain that the seatback is securely locked
into position. If the seatback is not securely
locked into position the seat will not provide the
proper stability for child seats and/or
passengers. An improperly latched seat could
cause serious injury.
1 — Seat Switch
2 — Seatback Switch
GETTING TO KNOW YOUR VEHICLE
43
Grand Wagoneer models will be equipped with
20-way power driver and front passenger seats.
The power seat switches are located on the driver
and front passenger door panels near the door
handles. These switches control the movement of
the seat cushion and the seatback.
Grand Wagoneer Power Seat Switches
Adjusting The Seat Forward Or Rearward
The seat can be adjusted both forward and
rearward. Push the seat switch forward or
rearward. The seat will move in the direction of the
switch. Release the switch when the desired
position has been reached.
Adjusting The Seat Up Or Down
The height of the seats can be adjusted up or
down. Pull upward or push downward on the rear of
seat switch, the seat will move in the direction of
the switch. Release the switch when the desired
position has been reached.
Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in
two directions. Pull upward or push downward on
the front of the seat switch, the front of the seat
cushion will move in the direction of the switch.
Release the switch when the desired position has
been reached.
Reclining The Seatback
The angle of the seatback can be adjusted forward
or rearward. Push the seatback recline switch
forward or rearward, the seat will move in the
direction of the switch. Release the switch when
the desired position is reached.
For Grand Wagoneer models, the angle of the
upper seatback can also be adjusted forward or
rearward. Push the upper seatback switch forward
or rearward, and the seat will move in the direction
of the switch. Release the switch when the desired
position is reached.
1 — Front Headrest Adjustment Switch
2 — Power Massage Switch
3 — Decrease Back/Thigh Bolster & Lumbar
Switch
4 — Increase Back/Thigh Bolster & Lumbar
Switch
5 — Upper Seatback Switch
6 — Seatback Recline Switch
7 — Seat Switch (Multiple Functions)
8 — Cushion Extender Switch
WARNING!
Adjusting a seat while driving may be
dangerous. Moving a seat while driving could
result in loss of control which could cause a
collision and serious injury or death.
Seats should be adjusted before fastening the
seat belts and while the vehicle is parked.
Serious injury or death could result from a
poorly adjusted seat belt.
Do not ride with the seatback reclined so that
the shoulder belt is no longer resting against
your chest. In a collision you could slide under
the seat belt, which could result in serious
injury or death.
CAUTION!
Do not place any article under a power seat or
impede its ability to move as it may cause
damage to the seat controls. Seat travel may
become limited if movement is stopped by an
obstruction in the seat's path.
2
44
GETTING TO KNOW YOUR VEHICLE
Power Seat Bolster Adjustment —
If Equipped
In Grand Wagoneer models, the front driver and
passenger seatback and seat cushion bolsters can
be extended outward, or retracted inward by using
the (+) and (–) adjustment switches on the door
panel. The bolsters can also be adjusted directly in
the Front Comfort And Convenience Display or the
Uconnect display.
Push the (+) switch to extend the bolsters, or push
the (–) switch to retract the bolsters.
Seat Bolster Adjustment Switches
When either the (+) or the (–) switch is pushed, the
Front Comfort And Convenience Display
page 72 will change to the Seat menu. The last
selected seat item of lumbar in/out, lumbar up/
down, back bolster, or thigh bolster will be
retained. Select the desired adjustment type, and
then press the (+) or (–) switch to adjust.
NOTE:
If the Front Comfort And Convenience Display is in
the stowed position, the Seat menu will appear in
the main Uconnect display.
Cushion Extender — If Equipped
In Grand Wagoneer models, the cushion can be
extended forward a couple inches (centimeters) to
increase thigh support. Push the cushion extender
switch forward or rearward to extend or retract the
cushion. Release the switch when the desired
position has been reached.
Power Lumbar — If Equipped
The front driver and passenger seats may be
equipped with power lumbar adjustment.
The Wagoneer power lumbar switch is located on
the outboard side of the power seat. Push the
switch forward to increase the lumbar support.
Push the switch rearward to decrease the lumbar
support. Pushing upward or downward on the
switch will raise and lower the position of the
support.
Wagoneer Power Lumbar Adjustment Switch
The Grand Wagoneer power lumbar adjustment
switches are located on the door trim. The (+) and
(–) switches can be used to adjust lumbar support
in/out and up/down. The power lumbar can also
be adjusted directly in the Front Comfort And
Convenience Display or the Uconnect display.
Grand Wagoneer Power Lumbar Adjustment Switches
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст