Jeep Grand Cherokee (2019 year). Instruction — part 34
Setting Name
Selectable Options
Paired Phones And Audio Devices
List of Paired Phones
NOTE:
The “Paired Phones and Audio Devices” feature shows which phones and audio devices are paired to the Phone/
Bluetooth system. For further information, refer to the Uconnect Owner’s Manual Supplement.
Display Phone Info In Cluster — If
Equipped
Off
On
Suspension — If Equipped
After pressing the “Suspension” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto Entry/Exit Suspension
On
Off
NOTE:
When the “Auto Entry/Exit Suspension” setting is selected, the vehicle automatically lowers from ride height posi-
tion when the vehicle is shifted to PARK for easy entry/exit.
Display Suspension Messages
All
Warnings Only
NOTE:
The “Display Suspension Messages” setting allows you to choose whether you want the Suspension system to display
all suspension messages, or to only display suspension warnings.
532
MULTIMEDIA
Setting Name
Selectable Options
Tire Jack Mode
On
Off
NOTE:
When the “Tire Jack Mode” setting is selected, the air suspension system is disabled to prevent auto leveling of the
suspension while the vehicle is on a jack, changing a tire.
Transport Mode
On
Off
NOTE:
When the “Transport Mode” setting is selected, the air suspension system is disabled to assist with flat bed towing.
Wheel Alignment Mode
On
Off
NOTE:
The “Wheel Alignment Mode” setting prevents auto leveling of the air suspension while performing a wheel align-
ment service.
10
MULTIMEDIA
533
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Tune Start
Off
On
NOTE:
The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using
one of the twelve presets, so you can enjoy the complete song. This feature occurs the first time the preset is selected
during that current song. Tune Start works in the background, so you will not even realize it’s on, except that you
will miss the experience of joining your favorite song with only a few seconds left to play.
Channel Skip
List of Channels
NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude
undesirable channels while scanning. This feature allows you to select the channels you would like to skip.
Subscription Info
Sirius ID
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
534
MULTIMEDIA
Restore Settings
After pressing the “Restore Settings” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Restore Settings
OK
Cancel
NOTE:
When this feature is selected, it will reset all settings to their default settings.
Clear Personal Data
After pressing the “Clear Personal Data” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Clear Personal Data
OK
Cancel
NOTE:
When the “Clear Personal Data” feature is selected, it will remove all personal data including Bluetooth devices and
presets.
10
MULTIMEDIA
535
System Information — If Equipped
After pressing the “System Information” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
System Information
System Software Information Screen
NOTE:
When this feature is selected, a “System Information” screen will appear, displaying the system software version.
Customer Programmable Features — Uconnect
4C/4C NAV Settings
Press the “Apps
” button, then press the “Settings”
button on the touchscreen to display the menu setting
screen. In this mode the Uconnect system allows you to
access programmable features that may be equipped
such as Language, Display, Units, Voice, Clock, Safety &
Driving Assistance, Mirrors & Wipers, Lights, Doors &
Locks, Auto-On Comfort, Engine Off Options, Suspen-
sion, Audio, Phone/Bluetooth, SiriusXM Setup, Acces-
sibility, Reset, and System Information.
NOTE:
Depending on the vehicles options, feature settings
may vary.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired
mode, press and release the preferred setting “option” until
a check-mark appears next to the setting, showing that
setting has been selected. Once the setting is complete,
either press the “Back” Arrow button on the touchscreen to
return to the previous menu, or press the “X” button on the
touchscreen to close out of the settings screen. Pressing the
“Up” or “Down” Arrow button on the right side of the
screen will allow you to toggle up or down through the
available settings.
536
MULTIMEDIA
Language
After pressing the “Language” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Language
English
Espanol
Francais
When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Espa-
ñol) for all display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set
Language” button on the touchscreen, then press the desired language button on the touchscreen until a check-mark
appears next to the language, showing that setting has been selected.
Display
After pressing the “Display” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Display Mode
Auto
Manual
Display Brightness With
Headlights ON
+
-
NOTE:
To make changes to the
⬙Display Brightness With Headlights ON⬙ setting, the headlights must be on and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
10
MULTIMEDIA
537
Setting Name
Selectable Options
Display Brightness With
Headlights OFF
+
-
NOTE:
To make changes to the
⬙Display Brightness With Headlights OFF⬙ setting, the headlights must be off and the interior
dimmer switch must not be in the
⬙party⬙ or ⬙parade⬙ positions.
Set Theme — If Equipped
On
Off
NOTE:
When the “Set Theme” feature is selected, you may select the theme for the display screen. To make your selection,
press the
⬙Set Theme⬙ button on the touchscreen, then select the desired theme option button until a check-mark ap-
pears showing that the setting has been selected.
Touchscreen Beep
On
Off
Control Screen Time-Out —
If Equipped
On
Off
NOTE:
When the “Control Screen Time-Out” feature is selected, the Controls Screen will stay open for five seconds before
the screen times out. With the feature deselected, the screen will stay open until it is manually closed.
538
MULTIMEDIA
Setting Name
Selectable Options
Navigation Turn-By-Turn In
Cluster — If Equipped
On
Off
NOTE:
When the “Navigation Turn-By-Turn In Cluster” feature is selected, the turn-by-turn directions will appear in the in-
strument cluster display as the vehicle approaches a designated turn within a programmed route.
Phone Pop-ups Displayed In
Cluster
On
Off
Units
After pressing the “Units” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
The “Custom” option allows you to set the “Speed” (MPH, or km/h), “Distance” (mi, or km), “Fuel Consumption”
[MPG (US), MPG (UK), L/100 km, or km/L], “Pressure” (psi, kPa, or bar), and “Temperature” (°C, or °F) units of
measure independently.
10
MULTIMEDIA
539
Voice
After pressing the “Voice” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Always
With Help
Never
Clock
After pressing the “Clock” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Sync Time With GPS
On
Off
Set Time Hours
+
-
NOTE:
The “Set Time Hours” feature will allow you to adjust the hours. The “Sync time with GPS” button on the touch-
screen must be unchecked.
Set Time Minutes
+
-
NOTE:
The “Set Time Minutes” feature will allow you to adjust the minutes. The “Sync time with GPS” button on the touch-
screen must be unchecked.
Time Format
12hrs
24hrs
Show Time in Status Bar — If
Equipped
On
Off
540
MULTIMEDIA
Safety/Assistance
After pressing the “Safety/Assistance” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
ParkView Backup Camera
Delay
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.
Active ParkView Backup
Camera Guidelines
On
Off
NOTE:
The “Active ParkView Backup Camera Guidelines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its project back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.
10
MULTIMEDIA
541
Setting Name
Selectable Options
Forward Collision
Warning — If Equipped
Off
Only Warning
Warning & Active Braking
NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in
front of you.
The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it remains
off when the vehicle is restarted.
Forward Collision Warning includes Advanced Brake Assist (ABA). The ABA applies additional brake pressure when
the driver requests insufficient brake pressure to avoid a potential frontal collision. When the “Only Warning” option
is selected a chime sound alerting you of a possible collision with the vehicle in front of you and more brake pressure
is needed. When the “Warning & Active Braking” option is selected, it applies the brakes to slow your vehicle in case
of potential forward collision and sound an audible chime to alert you.
Forward Collision
Warning Sensitivity — If
Equipped
Near
Med
Far
NOTE:
The “Forward Collision Warning Plus (FCW+) Sensitivity” setting determines at what relative distance the vehicle
directly in front of you needs to be at, before the system warns you of a possible collision with the vehicle directly in
front of you, based on the option is selected. “Far” gives you the most amount of reaction time, whereas “Near” gives
you the least amount of reaction time, based on the distance between the two vehicles.
542
MULTIMEDIA
Setting Name
Selectable Options
LaneSense Warning — If
Equipped
Early
Med
Late
NOTE:
The “LaneSense Warning” setting determines at what distance the LaneSense system warns you, through steering
wheel feedback, of a possible lane departure.
LaneSense Strength — If
Equipped
Low
Med
High
ParkSense — If Equipped
Sound
Sound & Display
NOTE:
The “ParkSense” system setting scans for objects behind the vehicle when the transmission gear selector is in RE-
VERSE and the vehicle speed is less than 7 mph (11 km/h), when enabled. It provides an alert (audible and/or vi-
sual) to indicate the proximity to other objects. The system can be enabled with “Sound,” or “Sound & Display.”
Front ParkSense Volume
Low
Med
High
Rear ParkSense Volume
Low
Med
High
Rear ParkSense Braking
Assist — If Equipped
On
Off
NOTE:
When the “Rear ParkSense Braking Assist” feature is selected, the park assist system detects objects located behind
the vehicle and utilize autonomous braking to stop the vehicle.
10
MULTIMEDIA
543
Setting Name
Selectable Options
Electric Power Steering
Default
Normal
Sport
Comfort
NOTE:
When the “Electric Power Steering Default” is selected, it allows you to change the default setting of your vehicle to
either normal, sport, or comfort.
Paddle Shifters
Enable
Disable
Blind Spot Alert — If
Equipped
Off
Lights
Lights & Chime
NOTE:
When the “Blind Spot Alert” feature is selected, the Blind Spot Monitoring (BSM) system is activated and shows a
visual alert in the outside mirrors, or it shows a visual alert in the outside mirrors as well as play an audible alert
when the turn signal is on. When “Off” is selected, the Blind Spot Monitoring (BSM) system is deactivated. If your
vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the
sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor
that is misaligned results in the BSM not operating to specification.
Hill Start Assist — If
Equipped
On
Off
544
MULTIMEDIA
Mirror and Wipers
After pressing the “Mirror and Wipers” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Rain Sensing Auto Wipers — If
Equipped
On
Off
Tilt Side Mirrors in Reverse
On
Off
Auto Folding Side Mirrors — If
Equipped
On
Off
Headlights with Wipers
On
Off
Lights
After pressing the “Lights” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.
Headlight Illuminated On Approach
0 sec
30 sec
60 sec
90 sec
10
MULTIMEDIA
545
Setting Name
Selectable Options
Headlights With Wipers — If
Equipped
On
Off
Auto Dim High Beams — If
Equipped
On
Off
NOTE:
When the “Auto Dim High Beams” feature is selected, the high beam headlights will activate/deactivate automati-
cally under certain conditions.
Daytime Running Lights — If
Equipped
On
Off
Flash Lights With Lock
On
Off
Doors & Locks
After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Auto Door Locks
On
Off
NOTE:
When the “Auto Door Locks” feature is selected, all doors lock automatically when the vehicle reaches a speed of
12 mph (20 km/h).
546
MULTIMEDIA
Setting Name
Selectable Options
Auto Unlock On Exit
On
Off
NOTE:
When this feature is selected, all doors unlock when the vehicle is stopped, the transmission is in the PARK or NEU-
TRAL position, and the driver’s door is opened.
Flash Lights With Lock
On
Off
Sound Horn With Lock
Off
1st Press
2nd Press
Sound Horn With Remote
Start
On
Off
1st Press Of Key Fob
Unlocks
Driver Door
All Doors
NOTE:
When
⬙Driver Door⬙ is selected with 1st Press Of Key Fob Unlocks, only the driver’s door unlocks with the first push
of the key fob unlock button. You must press the key fob unlock button twice to unlock the passenger’s doors. When
⬙All Doors⬙ is selected for 1st Press Of Key Fob Unlocks, all doors unlock on the first push of the key fob unlock but-
ton. If the vehicle is programmed 1st Press Of Key Fob Unlocks “All Doors,” all doors unlock no matter which Pas-
sive Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks “Driver Door” is programmed, only the
driver’s door unlocks when the driver’s door is grasped. With Passive Entry, if 1st Press Of Key Fob Unlocks “Driver
Door” is programmed, touching the handle more than once results in only the driver’s door opening. If “Driver
Door” is selected, once the driver door is opened, the interior door lock/unlock switch can be used to unlock all
doors (or use key fob).
10
MULTIMEDIA
547
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст