Jeep Liberty KJ. Manual — part 1191
24. Connect wires to output speed sensor (2).
25. Connect wires to line pressure sensor (2). Be
sure transmission harnesses are properly routed.
CAUTION: It is essential that correct length bolts
be used to attach the converter to the driveplate.
Bolts that are too long will damage the clutch sur-
face inside the converter.
26. Install torque converter-to-driveplate bolts. Tighten
bolts to 31 N·m (270 in.lbs.).
27. Install starter motor and cooler line bracket.
28. Connect cooler lines to transmission.
29. Install transmission fill tube.
30. Install exhaust components (1).
21 - 708
AUTOMATIC TRANSMISSION - 545RFE
KJ
31. Install the structural dust cover (2) (Refer to 9 -
ENGINE/ENGINE BLOCK/STRUCTURAL COVER
- INSTALLATION) onto the transmission and the
engine.
32. Align and connect propeller shaft(s).
33. Adjust gearshift cable if necessary.
34. Install any skid plates (1) removed previously.
(Refer to 13 - FRAMES & BUMPERS/FRAME/
TRANSFER CASE SKID PLATE - INSTALLA-
TION)
35. Lower vehicle.
36. Fill transmission with Mopar
T
ATF +4, type 9602,
Automatic Transmission Fluid.
KJ
AUTOMATIC TRANSMISSION - 545RFE
21 - 709
SCHEMATICS AND DIAGRAMS
HYDRAULIC SCHEMATICS
21 - 710
AUTOMATIC TRANSMISSION - 545RFE
KJ
KJ
AUTOMATIC TRANSMISSION - 545RFE
21 - 711
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст