Jeep Liberty KJ. Manual — part 283
11. With a pry bar remove the half shafts from the
axle.
NOTE: Right half shaft has a splined axle that may
come out with the half shaft.
12. Remove differential vent hose from cover and
remove drain trough (1) nut (2).
13. Support axle with a lift/jack.
14. Remove bolts from left front axle bracket (1) and
cradle bracket bolt.
15. Remove oil filter drip tray.
3 - 36
FRONT AXLE - 186FIA
KJ
16. Mark and remove right control arm cam bolt.
17. Remove front bolt (2) and rear bolt (3) from right
axle bracket (1) frame mounts.
18. Remove bolt (2) from left rear axle bracket (1)
frame mount.
19. Lower axle and from vehicle.
KJ
FRONT AXLE - 186FIA
3 - 37
INSTALLATION
NOTE: Separate right axle shaft from the half shaft
if necessary and install axle shaft in the axle.
1. Install right bracket (1) to axle and tighten to 88
N·m (65 ft. lbs.).
2. Install left rear bracket (1) to axle and tighten to 61
N·m (45 ft. lbs.).
3 - 38
FRONT AXLE - 186FIA
KJ
3. Install left front bracket (1) to axle and tighten to 61
N·m (45 ft. lbs.).
4. Raise axle up and align brackets with frame
mounts.
5. Install frame mount bolts and tighten to 88 N·m (65
ft. lbs.).
6. Install half shafts.
7. Install right front control arm cam bolt (1) with
marks aligned.
8. Install lower ball joint into lower control arms (4)
and tighten nuts (3).
9. Align clevis with knuckles and install clevis bolts.
10. Install stabilizer bar (1) links (2) to lower control
arms and install bolts.
11. Install oil filter trough.
12. Install new half shaft hub nuts and tighten to 136
N·m (100 ft. lbs.).
13. Install propeller shaft.
14. Install axle vent hose.
15. Fill differential with gear lubricant.
16. Install skid plate.
17. Tighten clevis and stabilizer links bolts to specifi-
cations.
18. Check vehicle alignment.
KJ
FRONT AXLE - 186FIA
3 - 39
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст