Jeep Liberty KJ. Manual — part 552
14. Install ring gear (3) on differential case (4) and
start two ring gear bolts (2).
15. Invert differential case in the vise.
16. Install new ring gear bolts and alternately tighten
to 102 N·m (75 ft. lbs.).
CAUTION: Never reuse the ring gear bolts. Failure
to follow these instructions will result in damage.
17. Install differential in axle housing and verify gear
mesh refer to Adjustments (Gear Contact Pattern).
3 - 112
REAR AXLE - 8 1/4
KJ
VEHICLE QUICK REFERENCE
TABLE OF CONTENTS
page
page
FLUID - CAPACITIES & RECOMMENDED
FLUIDS, LUBRICANTS, AND GENUINE
PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FUSE LOCATIONS & TYPES
FUSE PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
MAINTENANCE SCHEDULES
MAINTENANCE SCHEDULES - GASOLINE
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MAINTENANCE SCHEDULES - DIESEL
ENGINE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
MAINTENANCE SCHEDULES - GASOLINE
ENGINES - EXPORT. . . . . . . . . . . . . . . . . . . . . . . . 18
DESCRIPTION – DIESEL ENGINES –
EXPORT SCHEDULES. . . . . . . . . . . . . . . . . . . . . . 23
REPLACEMENT BULBS
REPLACEMENT LIGHT BULBS - INTERIOR . . . 27
REPLACEMENT LIGHT BULBS - EXTERIOR . . 27
TRAILER TOWING
TRAILER TOWING . . . . . . . . . . . . . . . . . . . . . . . . . . 28
KJ
VEHICLE QUICK REFERENCE
4 - 1
FLUID - CAPACITIES & RECOMMENDED
SPECIFICATIONS
FLUIDS, LUBRICANTS, AND GENUINE PARTS
ENGINE
Component
Fluid, Lubricant, or Genuine Part
Engine Coolant
Mopar
T
Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid
Organic Additive Technology)
Engine Oil (3.7L Engines)
Use API Certified SAE 5W-30 Engine Oil, meeting the requirements of
DaimlerChrysler Material Standard MS-6395.
Engine Oil (2.8L Diesel Engines)
Use SAE 0W-40 Synthetic Engine Oil that meets API Categories SL/CF, and
the requirements of DaimlerChrysler Material Standard MS-10725. If SAE
0W-40 is not available, SAE 5W-40 Synthetic Engine Oil is acceptable.
Oil Filter (3.7L Engine)
Mopar
T
Oil Filter (P/N 4781452AA or 4781452BB)
Oil Filter (2.8L Diesel Engine)
Mopar
T
Oil Filter (P/N 05072720AA)
Spark Plugs
Refer to the Vehicle Emission Control Information label in the engine
compartment.
Fuel Selection (Gasoline Engines
Only)
87 Octane (89 Octane should be used for trailer towing purposes - 3.7L
Only).
ENGINE - EXPORT
Component
Fluid, Lubricant, or Genuine Part
Engine Coolant
Mopar
T
Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid
Organic Additive Technology)
Engine Oil - Gasoline (Non ACEA
Categories)
For best performance and maximum protection under all types of operating
conditions, the manufacture only recommends engine oils that are API
certified and meet the requirements of DaimlerChrysler Material Standard
MS-6395. Use Mopar or an equivalent oil meeting the specification MS-6395.
These Certified Oils exhibit the American Petroleum Institute (API) Engine Oil
Certification Symbol on the front of the oil container. This symbol means that
the oil has been tested, certified, and licensed by the American Petroleum
Institute (API) to meet the oil standards required by the manufacturers. The
manufacturer only recommends API Certified engine oils that meet the
requirements of DaimlerChrysler Material Standard MS-6395.
Engine Oil - Gasoline (ACEA
Categories)
For countries that use the ACEA European Oil Categories for Service Fill Oils,
use engine oils that meet the requirements of ACEA A3/B3, A3/B4 or A5/B5.
Engine Oil - Diesel
Use only Diesel Engine Oils confirming to API (American Petroleum Institute)
Quality CH-3 or CH-4. For countries that use the ACEA European Oil
Categories for Service Fill Oils, use engine oils that meet the requirements of
ACEA A3/B3 or A3/B4.
Oil Filter (3.7L Engine)
Mopar
T
Oil Filter (P/N 04781452AA or 04781452BB)
Oil Filter (2.8L Diesel Engine)
Mopar
T
Oil Filter (P/N 05072720AA)
Spark Plugs
Refer to the Vehicle Emission Control Information label in the engine
compartment.
Fuel Selection (Gasoline
Engines)
91 Octane
4 - 2
VEHICLE QUICK REFERENCE
KJ
Chassis
Component
Fluid, Lubricant, or Genuine Part
Automatic Transmission
Mopar
T
ATF+4 Automatic Transmission Fluid
Manual Transmission
Mopar
T
Manual Transmission Lubricant or equivalent (meeting the
requirements of DaimlerChrysler Material Standard MS-9224)
Transfer Case
Mopar
T
ATF+4 Automatic Transmission Fluid
Axle Differential (Front)
Mopar
T
Gear & Axle Lubricant (SAE 80W-90) or equivalent.
Axle Differential (Rear)
Mopar
T
Synthetic Gear Lubricant (SAE 75W-90) or equivalent. For trailer
towing, the lubricant should be replaced with Mopar
T
Synthetic Gear & Axle
Lubricant (SAE 75W-140) or equivalent.
Models equipped with Trac-Lok
™
require a limited-slip additive.
Brake Master Cylinder
Mopar
T
DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE
J1703 brake fluid is not available, then DOT 4 is acceptable. Use only
recommended brake fluids.
Power Steering Reservoir
Mopar
T
ATF+4 Automatic Transmission Fluid
CHASSIS - EXPORT
Component
Fluid, Lubricant, or Genuine Part
Automatic Transmission
Mopar
T
ATF+4 Automatic Transmission Fluid
Manual Transmission
Mopar
T
Manual Transmission Lubricant (P/N 04874464).
Transfer Case
Mopar
T
ATF+4 Automatic Transmission Fluid.
Axle Differential (front-rear)
Mopar
T
SAE 75W-140 (API GL5) Synthetic Gear Lubricant or equivalent.
The 8.25 Corporate Rear Axle should use a SAE 75W-90 Gear Lubricant.
For trailer towing, the lubricant should be replaced with SAE 75W-140
Synthetic Gear Lubricant.
Models equipped with Trac-Lok
™
require a friction modifier additive.
Brake Master Cylinder
Mopar
T
Brake Fluid DOT 3 Motor Vehicle. If Mopar
T
brake fluid conforming
to SAE J1703 standards is not available, then DOT 4 or DOT 4+ brake fluid
is acceptable.
Power Steering Reservoir
Mopar
T
ATF+4 Automatic Transmission Fluid
Ball Joints, Prop
Shafts, U-Joints, Yokes, & Wheel
Bearings
Mopar
T
Multi-Purpose Lube NLGI Grade 2 EP, GC-LB
CAPACITIES
DESCRIPTION
U.S.
Metric
Fuel (Approximate)
20.5 Gallons
78 Liters
Engine Oil with Filter
3.7 Liter Engines (SAE 5W-30, API Certified Engine Oil)
5 Qts
4.7 Liters
2.8 Liter Diesel Engine (SAE 0W-40 Synthetic Engine Oil)
6.4 Qts
6.1 Liters
Cooling System *
3.7 Liter Engine (Mopar
T
Antifreeze/Coolant 5 Year/100,000
Mile Formula)
14 Qts
13.2 Liters
2.8 Liter Diesel Engine (Mopar
T
Antifreeze/Coolant 5 Year/
100,000 Mile Formula)
13 Qts
12.5 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
KJ
VEHICLE QUICK REFERENCE
4 - 3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст