Jeep Liberty KJ. Manual — part 1232
9. Remove shift sector (1).
MAINSHAFT
1. Remove the drive sprocket retaining ring (2) from
the output shaft (1).
2. Remove the drive sprocket (3) thrust washer (2)
from the output shaft (1).
21 - 872
TRANSFER CASE - NV241 GENII
KJ
3. Remove drive sprocket (2) from the output shaft
(1).
4. Remove the clutch gear (2) from the output shaft
(1).
Remove the sprocket hub (2) from the output shaft
(1).
KJ
TRANSFER CASE - NV241 GENII
21 - 873
5. Remove the mode hub (3) retaining ring (2) from
the output shaft (1).
6. Remove the mode hub (2) from the output shaft
(1).
INPUT AND PLANETARY GEAR
1. Remove input gear seal with suitable screw and
slide hammer.
2. Remove input gear (1) retaining ring (2) with heavy
duty snap-ring pliers.
21 - 874
TRANSFER CASE - NV241 GENII
KJ
3. Place front case in horizontal position. Then
remove input gear and low range gear as an
assembly (2). Tap gear out of bearing with plastic
mallet, if necessary.
INPUT AND PLANETARY GEAR
1. Remove snap-ring (1) that retains input gear in low
range gear.
2. Remove retainer (3).
KJ
TRANSFER CASE - NV241 GENII
21 - 875
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст