Jeep Liberty KJ. Manual — part 49
INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS
DIAGNOSIS AND TESTING
8J - 2
INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS
KJ
ABS LAMP CIRCUIT SHORT
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition in the Run/Start position.
•
Set Condition:
The Instrument Cluster detects Indicator short/open fault during internal self test.
Possible Causes
INSTRUMENT CLUSTER
Diagnostic Test
1.
INSTRUMENT CLUSTER
With the scan tool, erase DTCs.
Turn the ignition off, wait 10 seconds, then turn the ignition on.
With the scan tool, read DTCs.
When this code is set, the Instrument Cluster must be replaced.
Yes
>> Replace the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES - STANDARD PROCEDURE)
No
>> Test Complete.
KJ
INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS
8J - 3
ABS LAMP OPEN
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition in the Run/Start position.
•
Set Condition:
The Instrument Cluster detects Indicator short/open fault during internal self test.
Possible Causes
INSTRUMENT CLUSTER
Diagnostic Test
1.
INSTRUMENT CLUSTER
With the scan tool, erase DTCs.
Turn the ignition off, wait 10 seconds, then turn the ignition on.
With the scan tool, read DTCs.
When this code is set, the Instrument Cluster must be replaced.
Yes
>> Replace the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES - STANDARD PROCEDURE)
No
>> Test Complete.
8J - 4
INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS
KJ
AIRBAG LAMP CIRCUIT SHORT
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition in the Run/Start position.
•
Set Condition:
The Instrument Cluster detects Indicator short/open fault during internal self test.
Possible Causes
INSTRUMENT CLUSTER
Diagnostic Test
1.
INSTRUMENT CLUSTER
With the scan tool, erase DTCs.
Turn the ignition off, wait 10 seconds, then turn the ignition on.
With the scan tool, read DTCs.
When this code is set, the Instrument Cluster must be replaced.
Yes
>> Replace the Instrument Cluster in accordance with the Service Information.
Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES - STANDARD PROCEDURE)
No
>> Test Complete.
KJ
INSTRUMENT CLUSTER - ELECTRICAL DIAGNOSTICS
8J - 5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст