Jeep Liberty KJ. Manual — part 205
ORC INTERNAL 1
•
When Monitored:
With the ignition on.
•
Set Condition:
The Occupant Restraint Controller (ORC) on board diagnostics continuously performs internal circuit tests. The
ORC will set this DTC if it identifies an out of range internal circuit.
Possible Causes
ORC
Diagnostic Test
1.
REPLACE THE ORC
NOTE: Ensure that the battery is fully charged.
Repair
WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to
take proper precautions could result in accidental airbag deployment and personal injury or death.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
Replace the ORC in accordance with the Service Information.
Perform the *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
8O - 126
RESTRAINTS - ELECTRICAL DIAGNOSTICS
KJ
ORC INTERNAL 2
•
When Monitored:
With the ignition on.
•
Set Condition:
The Occupant Restraint Controller (ORC) on board diagnostics continuously performs internal circuit tests. The
ORC will set this DTC if it identifies an out of range internal circuit.
Possible Causes
ORC
Diagnostic Test
1.
REPLACE THE ORC
NOTE: Ensure that the battery is fully charged.
Repair
WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to
take proper precautions could result in accidental airbag deployment and personal injury or death.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
Replace the ORC in accordance with the Service Information.
Perform the *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
KJ
RESTRAINTS - ELECTRICAL DIAGNOSTICS
8O - 127
ORC STORED ENERGY FIRING 1
•
When Monitored:
With the ignition on.
•
Set Condition:
The Occupant Restraint Controller (ORC) on board diagnostics continuously performs internal circuit tests. The
ORC will set this DTC if it identifies an out of range internal circuit.
Possible Causes
ORC
Diagnostic Test
1.
REPLACE THE ORC
NOTE: Ensure that the battery is fully charged.
Repair
WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to
take proper precautions could result in accidental airbag deployment and personal injury or death.
WARNING: To avoid personal injury or death, turn the ignition off, disconnect the battery and wait two min-
utes before proceeding.
Replace the ORC in accordance with the Service Information.
Perform the *AIRBAG SYSTEM VERIFICATION TEST - VER 1.
8O - 128
RESTRAINTS - ELECTRICAL DIAGNOSTICS
KJ
B2255-OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLE
•
When Monitored:
With the ignition on. The module’s on board diagnostics continuously performs internal circuit tests.
•
Set Condition:
This DTC will set if the ORC Roll Over Feature has been disabled via the scan tool.
Possible Causes
OCCUPANT RESTRAINT CONTROLLER
Diagnostic Test
1.
OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLED
Turn the ignition on.
With the scan tool read the ORC Roll Over Feature status Enabled or Disabled.
Does the scan tool show Roll Over Feature Disabled?
Repair
Perform the *ORC VERIFICATION TEST-VER. 1.
KJ
RESTRAINTS - ELECTRICAL DIAGNOSTICS
8O - 129
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст