Jeep Liberty KJ. Manual — part 1125
4. Align components and install the ABM module on
the HCU.
5. Install the four screws attaching the ABM module to
the HCU. Tighten the mounting screws to 2 N·m
(17 in. lbs.) torque.
6. If the mounting bracket needs to be installed, install
the mounting pins in the HCU as necessary and
tighten to 11 N·m (97 in. lbs.) torque. Insert the
mounting pins into the grommets mounted in the
bracket, then install the single mounting bolt.
Tighten the mounting bolt to 11 N·m (97 in. lbs.)
torque.
7. Install the HCU in the vehicle (Refer to 5 -
BRAKES/HYDRAULIC/MECHANICAL/HCU
(HYDRAULIC CONTROL UNIT) - INSTALLATION).
INSTALLATION
NOTE: If the ABM module is being replaced with a
new ABM module it must be reprogrammed with
the use of a scan tool.
1. Install ABM (2) on the mounting studs (3).
2. Install mounting nuts. Tighten to 14.1 N·m (125 in.
lbs.).
3. Install brake lines (1) to the ABM (2) and tighten to
20 N·m (180 in. lbs.) .
5 - 260
BRAKES - ABS SERVICE INFORMATION
KJ
4. Install wiring harness connector (4) to the ABM (3)
and push down on the release to secure the con-
nector.
5. Install negative battery cable to the battery.
6. Bleed ABS brake system (Refer to 5 - BRAKES -
STANDARD PROCEDURE).
KJ
BRAKES - ABS SERVICE INFORMATION
5 - 261
CLUTCH
TABLE OF CONTENTS
page
page
CLUTCH
CLUTCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
CLUTCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
DISC-CLUTCH
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
INSTALLATION
BEARING-CLUTCH RELEASE
FLYWHEEL
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
DIAGNOSIS AND TESTING
FLYWHEEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
BEARING-PILOT
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LINKAGE
CYLINDER-MASTER
INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PEDAL-CLUTCH
RELAY-CLUTCH SWITCH OVERRIDE
SWITCH-CLUTCH PEDAL POSITION
CLUTCH PEDAL POSITION SWITCH . . . . . . . . . 20
KJ
CLUTCH
6 - 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст