Jeep Liberty KJ. Manual — part 1335
REAR SEAT BACK LATCH STRIKER
REMOVAL
1. Remove the quarter trim panel. (Refer to 23 -
BODY/INTERIOR/QUARTER
TRIM
PANEL
-
REMOVAL)
2. Remove the bolts and remove the striker.
INSTALLATION
1. Position the striker and install the bolts.
2. Tighten the bolts to 35 N·m (26 ft. lbs.).
3. Install the quarter trim panel. (Refer to 23 - BODY/
INTERIOR/QUARTER TRIM PANEL - INSTALLA-
TION)
23 - 240
SEATS
KJ
SEAT BACK FRAME - REAR
REMOVAL
1. Remove the center seat belt retractor, if equipped. (Refer to 8 - ELECTRICAL/RESTRAINTS/SEAT BELT &
RETRACTOR - REMOVAL)
2. Remove the seat back latch/lock assembly. (Refer to 23 - BODY/SEATS/FOLDING REAR SEAT BACK LATCH /
LOCK - REMOVAL)
INSTALLATION
1. Install the seat back latch/lock assembly. (Refer to 23 - BODY/SEATS/FOLDING REAR SEAT BACK LATCH /
LOCK - INSTALLATION)
2. Install the center seat belt retractor, if equipped. (Refer to 8 - ELECTRICAL/RESTRAINTS/SEAT BELT &
RETRACTOR - INSTALLATION)
KJ
SEATS
23 - 241
SEAT CUSHION - REAR
REMOVAL
1. Remove the seat back. (Refer to 23 - BODY/SEATS/SEAT BACK - REAR - REMOVAL)
2. Disconnect the J-straps and remove the seat cushion and cover.
INSTALLATION
1. Position the seat cushion and cushion cover onto the seat frame.
2. Connect the J-straps.
3. Install the seat back. (Refer to 23 - BODY/SEATS/SEAT BACK - REAR - INSTALLATION)
23 - 242
SEATS
KJ
STATIONARY GLASS
TABLE OF CONTENTS
page
page
DOOR GLASS
QUARTER WINDOW
WINDSHIELD
WINDSHIELD SAFETY PRECAUTIONS . . . . . . 246
KJ
STATIONARY GLASS
23 - 243
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст