Jeep Grand Cherokee SRT (2018 year). Instruction — part 31
Setting Name
Selectable Options
Forward Collision Warn-
ing Sensitivity — If
Equipped
Far
Med
Near
NOTE:
The “Forward Collision Warning Plus (FCW+) Sensitivity” setting determines at what relative distance the vehicle
directly in front of you needs to be at, before the system will warn you of a possible collision with the vehicle directly
in front of you, based on the option is selected. “Far” will give you the most amount of reaction time, whereas
“Near” will give you the least amount of reaction time, based on the distance between the two vehicles.
ParkSense — If Equipped
Sound Only
Sound and Display
NOTE:
The “ParkSense” system setting will scan for objects behind the vehicle when the transmission gear selector is in RE-
VERSE and the vehicle speed is less than 7 mph (11 km/h), when enabled. It will provide an alert (audible and/or
visual) to indicate the proximity to other objects. The system can be enabled with “Sound Only,” or “Sound and Dis-
play.”
Rear ParkSense Chime
Volume
Low
Medium
High
Front ParkSense Chime
Volume
Low
Medium
High
480
MULTIMEDIA
Setting Name
Selectable Options
Rear ParkSense Braking
Assist — If Equipped
NOTE:
When the “Rear ParkSense Braking Assist” feature is selected, the park assist system will detect objects located be-
hind the vehicle and utilize autonomous braking to stop the vehicle.
LaneSense Warning
Early
Medium
Late
NOTE:
The “LaneSense” setting determines at what distance the system will warn you, through steering wheel feedback, of a
possible lane departure.
LaneSense Strength — If
Equipped
Low
Medium
High
Blind Spot Alert — If
Equipped
Off
Lights
Lights and Chime
NOTE:
When the “Blind Spot Alert” feature is selected, the Blind Spot Alert system is activated and will show a visual alert
in the outside mirrors, or it will show a visual alert in the outside mirrors as well as play an audible alert when the
turn signal is on. When “Off” is selected, the Blind Spot Alert system is deactivated. If your vehicle has experienced
any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become
misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. A sensor that is misaligned will re-
sult in the Blind Spot Alert System not operating to specification.
10
MULTIMEDIA
481
Setting Name
Selectable Options
Hill Start Assist — If
Equipped
Paddle Shifters
On
Off
NOTE:
The “Paddle Shifters” setting allows you to enable or disable the steering wheel paddle shifters.
Mirror and Wipers
After pressing the “Mirror and Wipers” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Rain Sensing Auto Wipers
Tilt Mirrors in Reverse
Auto Folding Side Mirrors
On
Off
Headlights with Wipers
On
Off
Paddle Shifters
Enabled
Disabled
482
MULTIMEDIA
Brakes
After pressing the “Brakes” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Brake Service
Yes
No
NOTE:
Selecting the “Brake Service” feature will display a pop-up asking whether or you would like to retract the park
brakes to all break system service.
Lights
After pressing the “Lights” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.
Headlight Illumi-
nated On Approach
0 sec
30 sec
60 sec
90 sec
10
MULTIMEDIA
483
Setting Name
Selectable Options
Headlights With
Wipers — If
Equipped
Auto Dim High
Beams — If
Equipped
NOTE:
When the “Auto Dim High Beams” feature is selected, the high beam headlights will activate/deactivate automati-
cally under certain conditions.
Daytime Running
Lights — If
Equipped
Flash Lights With
Lock
484
MULTIMEDIA
Doors & Locks
After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Auto Door Locks
NOTE:
When the “Auto Door Locks” feature is selected, all doors will lock automatically when the vehicle reaches a speed of
12 mph (20 km/h).
Auto Unlock On Exit
NOTE:
When this feature is selected, all doors will unlock when the vehicle is stopped, the transmission is in the PARK or
NEUTRAL position and the driver’s door is opened.
Flash Lights With Lock
Sound Horn With Lock
Off
1st Press
2nd Press
Sound Horn With Remote Start
10
MULTIMEDIA
485
Setting Name
Selectable Options
1st Press Of Key Fob Unlocks
Driver Door
All Doors
NOTE:
When
⬙Driver Door⬙ is selected with 1st Press Of Key Fob Unlocks, only the driver’s door will unlock with the first
press of the key fob unlock button. You must press the key fob unlock button twice to unlock the passenger’s doors.
When
⬙All Doors⬙ is selected for 1st Press Of Key Fob Unlocks, all doors will unlock on the first press of the key fob
unlock button. If the vehicle is programmed 1st Press Of Key Fob Unlocks “All Doors,” all doors will unlock no mat-
ter which Passive Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks “Driver Door” is pro-
grammed, only the driver’s door will unlock when the driver’s door is grasped. With Passive Entry, if 1st Press Of
Key Fob Unlocks “Driver Door” is programmed, touching the handle more than once will result in only the driver’s
door opening. If “Driver Door” is selected, once the driver door is opened, the interior door lock/unlock switch can
be used to unlock all doors (or use key fob).
Passive Entry — If Equipped
NOTE:
This feature allows you to lock and unlock the vehicles door(s) without having to push the key fob lock or unlock buttons.
Personal Settings Linked to Key Fob — If
Equipped
NOTE:
This feature provides automatic recall of all settings stored to a memory location (driver’s seat, exterior mirrors, steer-
ing column position and radio station pre-sets) to enhance driver mobility when entering and exiting the vehicle.
Power Lift Gate Alert — If Equipped
486
MULTIMEDIA
Auto Comfort Systems — If Equipped
After pressing the “Auto-On Comfort & Remote Start”
button on the touchscreen, the following settings will be
available:
Setting Name
Selectable Options
Auto-On Driver Heated/
Ventilated Seat & Steering
Wheel With Vehicle Start
— If Equipped
Off
Remote Start
All Starts
NOTE:
When this feature is selected the driver’s heated seat and heated steering wheel will automatically turn ON when
temperatures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C) the driver vented seat will turn
ON.
10
MULTIMEDIA
487
Engine Off Options
After pressing the “Engine Off Options” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Engine Off Power
Delay — If
Equipped
0 sec
45 sec
5 min
10 min
NOTE:
When the “Engine Off Power Delay” feature is selected, the power window switches, radio, Uconnect phone system
(if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for
up to ten minutes after the ignition is cycled to OFF. Opening either front door will cancel this feature.
Headlight Off Delay
0 sec
30 sec
60 sec
90 sec
NOTE:
When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights
remain on after the engine is shut off.
Easy Exit Seat — If
Equipped
NOTE:
When the “Easy Exit Seat” feature is selected, it provides automatic driver seat positioning to enhance driver mobility
when entering and exiting the vehicle.
488
MULTIMEDIA
Audio
After pressing the “Audio” button on the touchscreen, the
following settings will be available:
Setting Name
Selectable Options
Balance/Fade
Speaker Icon
NOTE:
When in this display you may adjust the “Balance/Fade” of the audio by pressing and dragging the “Speaker Icon”
toward any location in the box.
Equalizer
Bass
Mid
Treble
NOTE:
When in this display you may adjust the “Bass”, “Mid” and “Treble” settings. Adjust the settings with the “+” and
“–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons on the
touchscreen. Bass/Mid/Treble also allow you to simply slide your finger up or down to change the setting as well as
press directly on the desired setting.
Speed Adjusted Volume
Off
1
2
3
Surround Sound — If Equipped
On
Off
AUX Volume Offset — If Equipped
+
-
NOTE:
This feature provides the ability to tune the audio level for portable devices connected through the AUX input.
10
MULTIMEDIA
489
Setting Name
Selectable Options
AutoPlay
NOTE:
The “AutoPlay” setting, when activated, automatically starts playing music off of a connect device as soon as it is
connected.
Phone/Bluetooth
After pressing the “Phone/Bluetooth” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Do Not Disturb
Do Not Disturb Options
NOTE:
The “Do Not Disturb” feature allows the paired phone to send a predetermined call, text, or both, to any incoming
call, or text, before sending it directly to voicemail. It also keeps a counter of all missed calls and texts while on the
road.
Paired Phones and Audio Sources
List Of Paired Phones and Audio Sources
NOTE:
The “Paired Phones and Audio Sources” feature shows which phones and audio sources are paired to the Phone and
Audio Sources Settings system. For further information, refer to the Uconnect Owner’s Manual Supplement.
Display Phone Info In Cluster
Off
On
490
MULTIMEDIA
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
SXM Tune Start
NOTE:
The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using
one of the twelve presets, so you can enjoy the complete song. This feature occurs the first time the preset is selected
during that current song. Tune Start works in the background, so you will not even realize it’s on, except that you
will miss the experience of joining your favorite song with only a few seconds left to play.
Channel Skip
List of Channels
NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude
undesirable channels while scanning. This feature allows you to select the channels you would like to skip.
10
MULTIMEDIA
491
Setting Name
Selectable Options
Subscription Info
Sirius ID
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your
radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription
Information screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the
screen or visit the provider online.
SiriusXM Travel Link is a separate subscription.
Accessibility — If Equipped
After pressing the “Accessibility” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Accessibility
On
Off
NOTE:
The “Accessibility” feature announces a function prior to performing the action selected when using DVD/Blu-ray
functions, when it is activated. For example, when activated, and the “Play” button is selected, the system will an-
nounce “Play Button Selected”, and then once pressed again the “Play” button will perform its action.
492
MULTIMEDIA
Restore Settings
After pressing the “Restore Settings” button on the touch-
screen, the following settings will be available:
Setting Name
Selectable Options
Restore Settings
OK
Cancel
NOTE:
When this feature is selected it will reset all settings to their default settings.
Clear Personal Data
After pressing the “Clear Personal Data” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
Clear Personal Data
OK
Cancel
NOTE:
When the “Clear Personal Data” feature is selected, it will remove all personal data including Bluetooth devices and
presets.
10
MULTIMEDIA
493
System Information
After pressing the “System Information” button on the
touchscreen, the following settings will be available:
Setting Name
Selectable Options
System Information
System Software Information Screen
NOTE:
When this feature is selected, a “System Information” screen will appear, displaying the system software version.
SRT PERFORMANCE PAGES — IF EQUIPPED
Performance Pages is an application that provides a dis-
play for performance indicators, as received from the
instrument cluster, that will help you gain familiarity with
the capabilities of your vehicle in real-time.
To access the Performance Pages, press the “Apps” button
on the touchscreen then press the “Performance Pages”
button on the touchscreen. Press the desired button on the
touchscreen to access that specific Performance Page.
WARNING!
Measurement of vehicle statistics with the Perfor-
mance Pages is intended for off-highway or off-road
use only and should not be done on any public
roadways. It is recommended that these features be
used in a controlled environment and within the limits
of the law. The capabilities of the vehicle as measured
by the Performance Pages must never be exploited in a
reckless or dangerous manner, which can jeopardize
the user’s safety or the safety of others. Only a safe,
attentive, and skillful driver can prevent accidents.
494
MULTIMEDIA
The Performance Pages include the following:
• Home
• Timers
• Gauges
• G-Force
• Engine
• Dyno
The following describes each feature and its operation:
Home
When Home is selected, a series of widgets (gauges) can be
customized by the user. Follow these steps to change a widget:
1. Pressing any of the gauges allows you to switch the
display.
Performance Pages — Home
10
MULTIMEDIA
495
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст