Jeep Grand Cherokee (2022 year). Manual in english — page 14
220
MULTIMEDIA
Doors & Locks
When the Doors & Locks button is pressed on the touchscreen, the system displays the options related to locking and unlocking the vehicle’s doors.
NOTE:
The Auto Door Locks feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 12 mph
(20 km/h). The Auto Door Locks feature can be enabled or disabled by an authorized dealer per written request of the customer. Please see an authorized
dealer for service.
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Auto Unlock On Exit
This setting will unlock the doors when any of the doors are opened from the
inside.
Flash Lights With Lock
This setting will allow you to turn the flashing of the lights when the Lock
button is pushed on the key fob on or off.
Sound Horn With Lock
This setting will sound the horn when the Lock button is pushed on the key
fob. The “Off” setting will not sound the horn when the Lock button is pushed.
The “1st Press” setting will sound the horn when the Lock button is pushed
once. The “2nd Press” setting will sound the horn when the Lock button is
pushed twice.
Sound Horn With Remote Start
This setting will sound the horn when the remote start is activated from the
key fob.
Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks
This setting will change how many pushes of the Unlock button on the key fob
are needed to unlock all the doors. The “Driver Door” setting will only unlock
the driver door on the first push on the Unlock button. The “All Doors” setting
will unlock all doors with only one push of the Unlock button.
Passive Entry
This setting will allow you to turn the Passive Entry feature (Keyless Enter ‘n
Go™) on or off.
MULTIMEDIA
221
Seats & Comfort
Personal Settings Linked To Key Fob
This setting will recall preset radio stations and driver seat position that have
been linked to the key fob.
Power Liftgate Alert
This setting will chime an audible alert when the power liftgate is raising or
lowering. Selectable options are “On” and “Off”.
Hands-Free Power Liftgate
This setting will use hands-free technology to automatically open or close the
power liftgate. Selectable options are “On” and “Off”.
Auto Relock
This setting will lock the doors after 30 seconds of the doors remaining
unlocked. The available options are “On” and “Off”.
Setting Name
Description
When Seats & Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has
been activated or the vehicle has been started.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Easy Exit Seats
This setting will automatically move the driver seat rearward when the engine
is shut off. The available settings are “On” and “Off”.
Auto-On Driver Heated/Ventilated Seat & Heated Steering Wheel With Vehicle
Start
This setting will activate the vehicle’s comfort systems and heated seats or
heated steering wheel when the vehicle is remote started or ignition is
started. The “Off” setting will not activate the comfort systems. The “Remote
Start” setting (if equipped) will only activate the comfort systems when using
Remote Start. The “All Start” setting will activate the comfort systems
whenever the vehicle is started.
5
222
MULTIMEDIA
Key Off Options
When the Key Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate
when the ignition is set to OFF.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Sound Horn With Lower
This setting will sound the horn when the Lower button is pressed on the key
fob.
Flash Lights With Lower
This setting will flash the lights when the Lower button is pressed on the key
fob.
Easy Exit Seat
This setting adjusts the seats to make exiting the vehicle easier.
Headlight Off Delay
This setting will allow you to set the amount of time the headlights remain on
after the vehicle has been turned off. The available settings are “0 sec”, “30
sec”, “60 sec”, and “90 sec”.
Auto Entry/Exit Suspension
This setting will turn the Auto Entry/Exit Suspension system on or off.
Radio Off Delay
This setting will keep the radio on for the selected amount of time after
vehicle shut off. The available options are “0 sec”, “45 sec”, “5 min”, and
“10 min”.
Radio Off With Door
This setting will keep the radio on when a door is opened or until the Radio Off
Delay time is reached. The available settings are “On” and “Off”.
Windows With Key Fob
This setting will allow you to control window function while the vehicle is off.
The available options are “On” and “Off”.
MULTIMEDIA
223
Suspension
When the Suspension button is pressed on the touchscreen, the system will display settings related to the vehicle’s air suspension.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Auto Entry/Exit Suspension
This setting will turn the Auto Entry/Exit Suspension system on or off.
Display Suspension Messages
This setting will display suspension messages in the Instrument Cluster
Display. The “All” setting will display all available messages. The “Warnings
Only” setting will only display warning messages.
Tire Jack Mode
This setting will disable the air suspension system to assist it changing a
spare tire.
Auxiliary Mode
This setting will allow you to set the auxiliary suspension mode. The available
options are “Off”, “Transport Mode”, and “Wheel Alignment Mode”. In
Transport Mode, the vehicle will not auto level when being transported by
another vehicle. In Wheel Alignment Mode, the vehicle will not auto level when
a wheel alignment is being performed.
5
224
MULTIMEDIA
Audio
When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio
location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Balance/Fade
This setting will adjust audio levels from specific speakers in the front/back
and left/right of the vehicle. The Speaker icon can be moved to set audio
location.
Equalizer
This setting will adjust the “Bass”, “Mid”, and “Treble” ranges of the audio.
Speed Adjusted Volume
This setting will adjust audio volume as speeds increase. At a higher setting,
the volume will increase more as the vehicle speeds up. The available settings
are “Off”, “1”, “2”, and “3”.
Surround Sound
This setting will turn the Surround Sound system on or off.
AUX Volume Offset
This setting will tune the audio levels from a device connected through the
AUX port. The available settings are “+” and “-”.
Auto Play
This setting will automatically begin playing audio from a connected device.
Auto-On Radio
This setting will automatically turn the radio on when the vehicle is started.
The available settings are “Off”, “On”, and “Recall Last”. With Recall Last, the
system resumes the previous task before vehicle shut off.
Radio off With Door
This setting will keep the radio on when a door is opened or until the Radio Off
Delay time is reached. The available settings are “On” and “Off”.
Volume Adjustment
This setting will allow you to set the audio volume levels for each option
(Media, Phone, Navigation, etc.). You can set the volume between 0 and 38.
MULTIMEDIA
225
Notifications
When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Notification Sounds
Turn this setting on or off to hear notification sounds throughout your system.
App Drawer Favoriting Pop-Ups
This setting turns the App Favorited pop-up on or off.
App Drawer Unfavoriting Pop-Ups
This setting turns the App Unfavorited pop-up on or off.
New Text Message Pop-Ups
This setting turns receiving/storing a pop-up for new text messages of any
connected phone on or off.
Missed Calls Message
This setting turns receiving/storing a pop-up for missed calls of any connected
phone on or off.
Navigation Pop-Ups
This setting turns receiving/storing predictive Navigation Pop-Ups on or off.
5
226
MULTIMEDIA
SiriusXM® Setup
Accessibility — If Equipped
When the SiriusXM® Setup button is pressed on the touchscreen, the system displays the options related to SiriusXM® satellite radio. These settings can be
used to skip specific radio channels and restart favorite songs from the beginning.
NOTE:
A subscription to SiriusXM® satellite radio is required for these settings to be functional.
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
SiriusXM® Account, Profile, And Settings
This setting will redirect you to the SiriusXM® settings menu within the
SiriusXM® menu.
Block Explicit
This setting will skip over content labeled as explicit. The available settings
are “On” and “Off”.
After pressing the Accessibility button on the touchscreen, the following setting will be available:
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Video Button Readback
This setting will turn the Video Button Readback feature on or off.
MULTIMEDIA
227
Software Updates
System Information
When the Software Updates button is pressed on the touchscreen, the system will display the setting related to updating the Uconnect software.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Software Downloads over Wi-Fi
This setting will allow software updates to happen over Wi-Fi. Selectable
options for the setting are “On” and “Off”.
After pressing the System Information button on the touchscreen, the following settings will be available:
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Version Information
When this feature is selected, a Version Information screen will appear,
displaying information about the version of your radio.
License Information
When this feature is selected, a License Information screen will appear,
displaying the licensing information of your radio.
5
228
MULTIMEDIA
Reset
When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings.
These settings can clear personal data and reset selected settings from other menus.
NOTE:
Depending on the vehicle’s options, feature settings may vary.
Setting Name
Description
Restart Radio
This setting will reboot the radio.
Reset Apps Drawer To Default Order
This setting will return the apps drawer to the default order. The available
options are “Yes” and “Cancel”. The X button can also be pressed to cancel
the screen.
Restore Settings to Default
This setting will return all the previously changed settings to their factory
default.
Clear Personal Data
This setting will display a pop-up that gives you the option to clear all personal
data from the system, including Bluetooth® devices and presets.
Reset Wi-Fi Password For Projection
This setting will allow you to reset the vehicle’s Wi-Fi password for smartphone
projection. The available options are “Yes” and “Cancel”. The X button can
also be pressed to cancel the screen.
Reset Performance Values
This setting will reset the performance values from your vehicle.
Factory Reset
This setting will restore the radio to its factory default settings.
MULTIMEDIA
229
STEERING WHEEL AUDIO CONTROLS
The Remote Sound System controls are located on
the rear surface of the steering wheel. Reach
behind the wheel to access the switches.
Steering Wheel Audio Controls
The right-hand control is a rocker-type switch with
a push button in the center and controls the
volume and mode of the sound system. Pushing
the top of the rocker switch increases the volume,
and pushing the bottom of the rocker switch
decreases the volume.
Pushing the center button makes the radio switch
between the various modes available (AM/FM/
SXM or Media, etc.)
The left-hand control is a rocker-type switch with a
push button in the center. The function of the
left-hand control is different depending on which
mode you are in.
The following describes the left-hand control
operation in each mode.
R
ADIO
O
PERATION
Pushing the top of the switch will seek up for the
next listenable station, and pushing the bottom of
the switch will seek down for the next listenable
station.
The button located in the center of the left-hand
control will tune to the next preset station that you
have programmed in the radio preset button.
M
EDIA
M
ODE
Pushing the top of the switch once goes to the next
track on the selected media (AUX/USB/
Bluetooth®). Pushing the bottom of the switch
once goes to the beginning of the current track, or
to the beginning of the previous track if it is within
eight seconds after the current track begins to
play.
PASSENGER SCREEN — IF EQUIPPED
Your vehicle may be equipped with a Passenger
Screen located above the glove compartment on
the passenger side of the vehicle. From the
Passenger Screen, you will be able to access
similar features seen within the Uconnect radio,
such as media functions, Rear Seat Entertainment
with Amazon FireTV Built-in, Navigation, and device
management.
To begin using the Passenger Screen, push the
Power button in the center stack, or press the
Power button under the Controls tab within the
Uconnect system. The Passenger Screen can be
turned off by accessing the Control screen and
pressing the Power Off button.
You must link Bluetooth® headphones to the
Passenger Screen to begin listening to the
system’s audio
NOTE:
The Passenger Screen will need to be turned On
each time the vehicle is started, and the system
will display the Home Screen upon boot up.
P
ASSENGER
S
CREEN
P
ERMISSIONS
Through the Uconnect system, features within the
Passenger Screen can be activated and
deactivated through Passenger Screen
Permissions. To access Permissions, press the
Vehicle button in the Menu Bar and select the
Settings tab. Then, press the Passenger Screen
settings menu. Press the On button for the
Passenger Screen Permission setting to activate
permissions.
5
230
MULTIMEDIA
Passenger Screen Permissions Settings Menu
By default, the Passenger Screen Permissions
setting is set to Off, and the driver will need to give
permission for the different features.
When Permissions is turned On, you can
individually select the permissions for the
followings:
Navigation
Device Manager
Rear Seat Entertainment — If Equipped
Passenger Screen Permissions can also be
activated through the Controls screen, under the
Vehicle button in the Menu Bar. If “Deny Passenger
Screen Permissions” is turned On, the setting will
switch itself to Off.
H
OME
S
CREEN
Passenger Screen Home Screen
When the Passenger Screen is started up and no
other media was running during the last ignition
cycle, the Home Screen will display. Here, you can
select from the features of the Passenger Screen.
On the left side of the screen, you can access
“Notifications and System Controls”.
The Notifications button (the bell) will take you to
the Notifications screen, identical to what is seen
in the main radio.
You can cycle between the features by swiping left
or right on the touchscreen. When accessing a
feature, press the Home button on the left side to
access the feature view and select a different
feature.
The available features are:
Audio
Video & Images
HDMI
Rear Seat Entertainment — If Equipped
Navigation
Devices
Cameras
1 — Home Screen Button
2 — Notifications Button
3 — Controls Button
4 — Feature Cards
MULTIMEDIA
231
Controls Screen
From the Controls Screen, you can adjust the
daytime/nighttime brightness of the screen,
change headphone volume, and power off the
Passenger Screen.
To change the brightness, adjust the slider up or
down, or press the Up or Down Arrow button
located next to the slider. “Up” will increase
brightness; “Down” will decrease brightness.
Daytime and nighttime brightness levels will vary,
and the adjustment maximum/minimum will differ
depending on the time of day.
To change the headphone volume, adjust the
slider up or down, or press the Up or Down Arrow
button located next to the slider. “Up” will increase
the volume; “Down” will decrease the volume.
NOTE:
Headphone volume can also be manually adjusted
from the headphones. Changing the headphone
volume manually will not reflect in the headphone
volume slider on the Passenger Screen.
If the Screen Off button is pressed, the Passenger
Screen will continue to operate, but the screen will
go dark. Tap the screen again to return to the
display. While the screen is off, audio will continue
to play from the Passenger Screen.
The Power Off button will fully shut down the
Passenger Screen. No audio or video will play from
it.
Passenger Screen Controls Screen
A
UDIO
A
ND
V
IDEO
Audio Feature
Audio allows you to listen to your favorite radio
station, a connected USB device, or connected
media device. You can directly change the source
on the Home Screen by pressing the Source button
in the feature. You can also expand it by pressing
the Full Screen View button.
1 — Screen Off
2 — Power Off
3 — Manage Headphones
4 — Mute Headphones
5 — Display Brightness
6 — Headphone Volume
1 — All Sources Tab
2 — Now Playing Tab
3 — Browse Tab
5
232
MULTIMEDIA
To change the media source, press the Source
button and then press on the desired source. The
available sources are:
Live Radio (FM, AM, SXM)
Bluetooth®
USB 1
USB 2
AUX
AV 1 — If Equipped
AV 2 — If Equipped
Rear Screen 1 Listen In — If Equipped
Rear Screen 2 Listen In — If Equipped
NOTE:
Audio devices connected via Bluetooth® must
be done through the Device Manager in the
radio. For more information on pairing a device,
refer to your Uconnect Owner’s Manual Supple
-
ment.
If the driver is listening to “Live Radio”, the
option will not be available in the Passenger
Screen. Select “Now Playing On Radio” to listen
to the currently playing station. If the driver
selects a radio station while the Passenger
Screen is playing live radio content, the feed will
end on the Passenger Screen and control will be
given to the Uconnect system.
On the Preset menu, you will be able to listen to
saved radio presets. Press the desired preset to
begin listening.
The Browse tab will let you browse through
different radio stations or audio saved onto a USB
or audio device. Press “Browse” and select from
the different folders. You can scroll up and down to
view the options within those folders. Press on the
desired radio station or audio track to begin
playing it.
When the USB source is selected, you can chose a
video file to play if saved to a USB device. Press
“Browse” and locate the folder with the video file.
Press the video file name, and it will begin to play
on the Passenger Screen.
NOTE:
Not all video files will be supported from a USB.
Certain video files may require digital rights to view
or play. These may be unavailable for playback on
the Passenger Screen.
Playing A Video
1 — Source Bar
2 — Now Playing Tab
3 — Browse Button
4 — Preset Bar
5 — Related Button
6 — Seek Down Button
7 — Tune Button
8 — Seek Up Button
9 — Replay Button
MULTIMEDIA
233
R
EAR
S
EAT
E
NTERTAINMENT
W
ITH
A
MAZON
F
IRE
TV B
UILT
-I
N
—
I
F
E
QUIPPED
Rear Seat Entertainment will let you control and
listen in to the content being played on the rear
entertainment screens. You can view the contents
of the rear screens, lock the rear screens, change
the source of the rear screens, or turn the rear
HDMI P
ROJECTING
HDMI lets you connect a device to the provided
HDMI port, using an HDMI cable, and project the
device directly to the Passenger Screen. To begin,
plug a device into the HDMI port. Then, press the
HDMI button on the touchscreen.
HDMI will continue to show the menu bar and
Headphone Paring button.
NOTE:
The HDMI Card will not automatically launch
when a new device is connected. The HDMI
Card will show a device connected, and the Card
will need to be pressed.
If the user disconnects a device from the HDMI
port while the HDMI Card is in full screen, the
system will close HDMI and reload the Home
Screen.
D
EVICE
M
ANAGER
Device Manager
Device Manager provides an easy place to view all
the devices connected to the Uconnect system and
lets you pair the Driver’s smartphone to the
Uconnect system. You will also pair Bluetooth®
headphones to the Passenger Screen from this
screen.
For more information on pairing your smartphone,
refer to your Uconnect Owner’s Manual
Supplement.
To pair a set of Bluetooth® Headphones:
1. If viewing Device Manager in full screen,
press the Add Device button. If viewing Device
Manager on the Home Screen, press “Pair
Bluetooth® headphones”.
2. From the pop-up, press “Search For
Headphones”. The system will begin searching
for the Bluetooth® signal of your headphones.
3. Select the name of you headphones from the
list of possible devices. The system will
connect to the headphones.
NOTE:
The Passenger Screen will connect to previously
paired Bluetooth® headphones after Passenger
Screen activation.
1 — Device Settings Button
2 — Phone Connectivity Button
3 — Media Connectivity Button
4 — Android Auto™/Apple CarPlay® Button
5 — Add Device Button
6 — Manage Headphone Button
7 — Do Not Disturb Button
8 — Two Active Phones Button
5
234
MULTIMEDIA
Removing Bluetooth® Headphones
1. From the Controls screen, press the Manage
Headphones button.
2. Press the Settings button (gear icon) next to
the set of headphones you wish to remove.
3. Press “Delete Device”; the Bluetooth®
headphones will be removed from the system.
N
AVIGATION
Navigation allows you to assist the driver in
searching for destinations using Uconnect’s
built-in Navigation system. For information on the
full functionality of Navigation, refer to your
Uconnect Owner’s Manual Supplement.
When a new route is selected from the Passenger
Screen, a confirmation will be sent to the driver.
The driver will be able to confirm or deny the route.
NOTE:
Using Navigation on the Passenger Screen will not
affect the Navigation screen in the Uconnect
system. The Driver can continue to use Navigation
while the Passenger Screen can “suggest” new
routes or stops.
C
AMERA
Camera will display the equipped vehicle camera
feed. When selected, press the desired Camera
button. The feed from that camera will display in
the center of the touchscreen. Press the X button
or Back Arrow button to return to the Home Screen.
NOTE:
The Passenger Screen will lose access to a camera
if the driver chooses to view it on the Uconnect
system or if a condition would activate the camera
on the Uconnect system (the rearview camera
being activated when the vehicle is shifted into
REVERSE).
3RD PARTY APPS
If equipped, your vehicle may contain some 3rd
party apps, which will further enhance your
Uconnect system.
McIntosh
McIntosh is a 3rd party app that can enhance your
Uconnect system’s media player. For the app to be
effective, there must be audio playback in the
Uconnect media player. McIntosh can control the
playback of audio as well as display the output
level decibel meters.
To launch the app, begin playing audio and follow
these steps:
1. Press the Apps button.
2. Press the McIntosh app.
McIntosh
MULTIMEDIA
235
The McIntosh app will allow you to perform the following when listening to music:
NOTE:
The seek feature will not work while using Blue
-
tooth®.
You cannot change the audio source within the
app. To do so, press the Media button, and then
press the Sources button.
To exit the app, press any of the buttons on the
Bottom Menu Bar.
For more information on the McIntosh app and its
REAR SEAT ENTERTAINMENT WITH
AMAZON FIRETV BUILT-IN — IF EQUIPPED
O
VERVIEW
Rear Seat Entertainment is designed to give your
family years of enjoyment.
There are multiple ways to interact with your Rear
Seat Entertainment system:
Stream your favorite shows with Amazon FireTV
Plug and play a variety of standard video games
or devices into the HDMI port
Listen to audio over wireless headphones (not
included, customer will have to provide their
own)
Plug and play a variety of devices into the Video
USB port
Please review this Owner's Manual to become
familiar with its features and operation.
Skip Backward
Press to skip backward. Press and hold to fast rewind.
Play/Pause
Press to play/pause the track.
Skip Forward
Press to skip forward. Press and hold to fast forward.
Repeat
Press to repeat track. Press again to repeat playlist. Press again to turn off
(works only with a USB device).
Change Channel Down
Press to change channel down. Press and hold to seek channel down. While
using AM/FM, pressing the channel down will change the frequency by 0.2.
Pressing and holding in AM/FM will seek channels.
Change Channel Up
Press to change channel up. Press and hold to seek channel up. While using
AM/FM, pressing the channel up will change the frequency by 0.2. Pressing
and holding in AM/FM will seek channels.
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст