Iveco Stralis AT/AD. Manual — part 96
120
GEARBOX EuroTronic 12 AS 2301 D.D./O.D.
S
TRALIS
AT/AD
Base - January 2003
TOOL NO.
DESCRIPTION
Hot air device
99305121
99322205
Rotary stand for overhauling assemblies
99322225
Mount to support assemblies (to fit onto stand 99322205)
99341003
Single-acting bridge
99341013
Reaction block
99341015
Clamp
GEARBOX EuroTronic 12 AS 2301 D.D./O.D.
121
S
TRALIS
AT/AD
TOOLS
TOOL NO.
DESCRIPTION
99341018
Pair of brackets with hole
99345057
Extractor reaction block
99345078
Extractor to remove drive input shaft bearing (use with 99345105)
993450998
Inserter to fit bearing on main shaft, rear side and to insert rear flange
of gearbox
99345105
Extractor for gearbox drive input shaft bearing (use with 99345078)
99347100
Small extractor (use with specific rings with 99347132)
122
GEARBOX EuroTronic 12 AS 2301 D.D./O.D.
S
TRALIS
AT/AD
Base - January 2003
TOOL NO.
DESCRIPTION
99347132
Ring grips to extract gearbox transmission shaft bearings (use with
99345057 - 99347100)
99360323
Tool to turn drive input shaft when refitting the gearbox to the
engine
99360526
Tool to extract and insert main shaft (use with 99360527) and to
drive in gearbox drive input shaft bearing (use with 99345098)
99360527
Tool retaining gearbox main shaft forks (use with 99360526)
99366811
Set of M10 eyebolts (3) to remove and refit gearboxes
99370006
Grip for interchangeable drifts
GEARBOX EuroTronic 12 AS 2301 D.D./O.D.
123
S
TRALIS
AT/AD
TOOLS
TOOL NO.
DESCRIPTION
99370007
Grip for interchangeable drifts
99370153
Tool for positioning main shaft when removing the transmission
shafts and for retaining gearbox reverse gear pins
99370172
Tools (6) to mount gearbox epicyclic reduction gear train
synchronizer rings
99370317
Reaction lever with extension to fasten drive output flange
99370415
Dial gauge base to adjust transmission shaft bearings (use with
99395604)
99370499
Guides (no. 3) to mount Splitter synchronizing device assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст