Iveco Stralis AT/AD. Manual — part 39
S
TRALIS
AT/AD
142
F3A ENGINE
Base - January 2003
TOOL NO.
DESCRIPTION
99360585
Swing hoist for engine disassembly assembly
99360605
Belt to insert piston in cylinder liner (60 - 125 mm)
99360612
Tool for positioning engine P.M.S.
99360613
Tool for timing of phonic wheel on timing gear
99360703
Tool to stop cylinder liners
99360706
Tool to extract cylinder liners (to be used with specific rings)
143
S
TRALIS
AT/AD
F3A ENGINE
TOOLS
TOOL NO.
DESCRIPTION
99360726
Ring (125 mm) (to be used with 99360706)
99361036
Brackets fixing the engine to rotary stand 99322230
99365056
Tool for injector holder heading
99370415
Base supporting the dial gauge for checking cylinder liner
protrusion (to be used with 99395603)
99378100
Tool for printing engine identification plates
(to be used with special punches)
99378102
Punches (B) for printing engine identification plates
(to be used with 99378100)
S
TRALIS
AT/AD
144
F3A ENGINE
Base - January 2003
TOOL NO.
DESCRIPTION
99378104
Punches (D) for printing engine identification plates
(to be used with 99378100)
99389834
Torque screwdriver for calibrating the injector solenoid
valve connector check nut
99390311
Valve guide sleeker
99390772
Tool for removing injector holding case deposits
99390804
Tool for threading injector holding cases to be extracted
(to be used with 99390805)
99390805
Guide bush (to be used with 99390804)
145
S
TRALIS
AT/AD
F3A ENGINE
TOOLS
TOOL NO.
DESCRIPTION
99394015
Guide bush (to be used with 99394041 or 99394043)
99394041
Cutter to rectify injector holder housing
(to be used with 99394015)
99394043
Reamer to rectify injector holder lower side
(to be used with 99394015)
99395216
Measuring pair for angular tightening with 1/2”
and 3/4” square couplings
99395218
Gauge for defining the distance between the centres
of camshaft and transmission gear
99395363
Complete square to check connecting rod squaring
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст