Engine Iveco C10/C13/C78/Cursor 13/Cursor 78. Manual — part 113
SECTION 5 - TOOLS
7
TOOLS
TOOL NO.
DESCRIPTION
99360337
Cylinder liner compression plate
(to be used with 99360334-99360336)
99360351
Tool to stop engine flywheel
99360499
Tool to take down and fit back camshaft bushes
99360500
Tool to lift crankshaft
99360551
Bracket to take down and fit engine flywheel
99360553
Tool for assembling and installing rocker arm shaft
8
SECTION 5 - TOOLS
TOOLS
TOOL NO.
DESCRIPTION
99360585
Swing hoist for engine disassembly assembly
99360605
Belt to insert piston in cylinder liner (60 - 125 mm)
99360612
Tool for positioning engine P.M.S.
99360613
Tool for timing of phonic wheel on timing gear
99360703
Tool to stop cylinder liners
99360706
Tool to extract cylinder liners (to be used with specific rings)
SECTION 5 - TOOLS
9
TOOLS
TOOL NO.
DESCRIPTION
99360726
Ring (125 mm) (to be used with 99360706)
99361036
Brackets fixing the engine to rotary stand 99322230
99365056
Tool for injector holder heading
99370415
Base supporting the dial gauge for checking cylinder liner
protrusion (to be used with 99395603)
99378100
Tool for printing engine identification plates
(to be used with special punches)
99378101*
99378103
•
99378105H
Punches (B) for printing engine identification plates
(to be used with 99378100)
10
SECTION 5 - TOOLS
TOOLS
TOOL NO.
DESCRIPTION
99389834
Torque screwdriver for calibrating the injector solenoid
valve connector check nut
99390311
Valve guide sleeker
99390772
Tool for removing injector holding case deposits
99390804
Tool for threading injector holding cases to be extracted
(to be used with 99390805)
99390805
Guide bush (to be used with 99390804)
99394015
Guide bush (to be used with 99394041 or 99394043)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст