Engine Iveco C10/C13/C78/Cursor 13/Cursor 78. Manual — part 75
6
SECTION 5 - TOOLS
TOOLS
TOOL NO.
DESCRIPTION
99360314
Tool to remove oil filter (engine)
99360321
Tool to rotate engine flywheel (to be used with 99360325)
99360325
Spacer (to be used with 99360321)
99360328
Tool to install gasket on valve guide
99360334
Compression tool for checking the protrusion of cylinder liners
(to be used with 99370415-99395603 and special plates)
99360336
Spacer (to be used with 99360334)
SECTION 5 - TOOLS
7
TOOLS
TOOL NO.
DESCRIPTION
99360337
Cylinder liner compression plate
(to be used with 99360334-99360336)
99360351
Tool to stop engine flywheel
99360481
Tool to remove valve guide
99360499
Tool to take down and fit back camshaft bushes
99360500
Tool to lift crankshaft
99360551
Bracket to take down and fit engine flywheel
8
SECTION 5 - TOOLS
TOOLS
TOOL NO.
DESCRIPTION
99360553
Tool for assembling and installing rocker arm shaft
99360585
Swing hoist for engine disassembly assembly
99360605
Belt to insert piston in cylinder liner (60 - 125 mm)
99360612
Tool for positioning engine P.M.S.
99360613
Tool for timing of phonic wheel on timing gear
99360703
Tool to stop cylinder liners
SECTION 5 - TOOLS
9
TOOLS
TOOL NO.
DESCRIPTION
99360706
Tool to extract cylinder liners (to be used with specific rings)
99360726
Ring (125 mm) (to be used with 99360706)
99361036
Brackets fixing the engine to rotary stand 99322230
99365056
Tool for injector holder heading
99370415
Base supporting the dial gauge for checking cylinder liner
protrusion (to be used with 99395603)
99378100
Tool for printing engine identification plates
(to be used with special punches)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст