Iveco Daily Euro 4. Manual — part 113
Figure 16
101948
: Spread LOCTITE 5206 sealant on the contact surfaces
F Spread LOCTITE 242 on the thread
J Spread LOCTITE 510 on the thread
106
6 S 400 A O.D. TRANSMISSION
D
AILY
E
URO
4
DESCRIPTION
TORQUE
DESCRIPTION
Nm
kgm
1D
Screw securing driver to main rod
9.5
0.9
2
Gearbox actuator support fastening screw
23
2.3
3
Clutch housing, screw to fasten clutch housing to crankcase
80
8
4
Constant mesh shaft cover fastening screw
23
±15%
2.3
±15%
5
J
Screw securing p.t.o. side cover
46
±15%
4.6
±15%
6
Plugs for rod preventing gear engagement
32
3.2
7
Clutch actuator fastening screws
23
2.3
8
Screw securing reverse gear shaft
23
±15%
2.3
±15%
9*
Screw securing rear cover
23
±15%
2.3
±15%
10
Electronic control unit fastening screws
9.5
0.9
11
Side plug on rear cover
35
3.5
12
Speedometer transmitter fixing
50
5
13
Screw locking sleeve for transmission coupling on main shaft
235
23.5
14
Cap
32
3.2
15D
Screw securing ball bearing retaining ring
9.5
±15%
0,.
±15%
16
Gearbox actuator fastening screws
23
3.2
17
Electric motor fastening screws
-
-
6 S 400 A O.D. TRANSMISSION
107
D
AILY
E
URO
4
TOOL NO.
DESCRIPTION
99327010
E.A.SY.
99327001
Modus station
108
6 S 400 A O.D. TRANSMISSION
D
AILY
E
URO
4
108872
DIAGNOSIS
Diagnosis instruments
DISPLAY
Computer-assisted diagnosis station intended for diagnosis of electronically-controlled braking systems, pneumatic suspensions,
engines and systems.
This station is equipped with auxiliary functions such as electronic control unit programming, spare part catalogue referencing,
time-charts, etc.
MODUS
IT 2000
IT 2000 is a diagnosis instrument for all Electronic Systems fitted to IVECOvehicles. It allows you to promptly operate on a vehicle
by recognizing the latter by means of the chassis number.
It stores the results of the diagnostic work carried out.
It can also be used as a laptop PC and is set for remote diagnosis.
Using MODUS as a mother station allows you to update and configure IT 2000.
E.A.SY.
The E.A.SY. system allows you to easily diagnose and program the various electronic controls unit fitted to the vehicle. It is made
up of an ECI module for communication with the electronic control units and a Panasonic PC.
The ECI module allows you, by taking advantage of the Panasonic PC, to easily carry out work on the road; in particular, diagnostic
work can be assisted by a specialized remote centre, thanks to the wireless technology incorporated into the Panasonic PC (e.g.
GPRS).
Figure 17
System fault displayed with symbols indicated in figure.
6 S 400 A O.D. TRANSMISSION
109
D
AILY
E
URO
4
The 38-pole connection makes it possible to perform the following operations:
- Gearbox control unit data reading
- Error (if any) detection and clearing
- Clutch engagement/release control
- Control unit configuring
A. IT 2000 - B. E.A.SY. - C. MODUS - D. Body computer - E. Diagnosis socket.
MODUS - IT 2000 - E.A.SY. CONNECTION
Figure 18
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст