Iveco Daily. Manual — part 267
30
AXLE 5819
D
AILY
Base - May 2004
30772
The front axle 5819 has independent wheels.
It is basically composed of:
- stub axles;
- wheel hubs;
- suspension arms.
The stub axles are also the end elements of the suspension.
They are connected to the top and bottom suspension arms
by swivel heads that allow turning the stub axle.
The brake calipers and steering levers are secured on the
king-pin of the stub axles.
The hubs are supported on the stub axle pins by
Unit-Bearings, which need no adjustment or lubrication.
Figure 1
AXLE 5819
31
D
AILY
DESCRIPTION
32
AXLE 5819
D
AILY
Base - May 2004
Axle type
5819
WHEEL HUBS
Wheel hubs bearings
UNIT BEARING
Hub bearings end play
-
Wheel hub bearings play
adjustment
Not Adjustable
Fixing nut torque tightening
WHEEL GEOMETRY
Wheel camber angle
(vehicle at static load)
0
o
30’
± 20’
Wheel caster angle
(vehicle at static load)
1
o
35’
± 20’
Wheel toe-in
(vehicle at static load)
2.5
± 1
52256
FRONT AXLE 5819
Figure 2
AXLE 5819
33
D
AILY
TIGHTENING TORQUES
PART
TORQUE
PART
Nm
kgm
1
Screw securing caliper to caliper mounting
154
÷ 170
15.4
÷ 17
2
Screw securing guards to stub axle
15
÷ 22
1.5
÷ 2.2
3
Screw securing caliper mounting to stub axle
154
÷ 170
15.4
÷ 17
4
Stud fixing to brake disc
(apply IVECO 1905683 sealant on the thread)
85
÷ 104
8.5
÷ 10.4
5
Screw securing plate and brake disc to wheel hub
94
÷ 115
9.4
÷ 11.5
6
Ring nut securing wheel hub
257
÷ 314
25.7
÷ 31.4
7
Screw securing ring nut
20
÷ 24
2
÷ 2.4
8
Nut securing wheel
284.5
÷ 343.3
28.4
÷ 34.3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст