Iveco Daily. Manual — part 264
52260
52259
61670
61669
Figure 17
Figure 18
Figure 19
Figure 20
Remove screws (5) and remove protection (4) from stub
axle (6).
Remove nut (2) fixing kingpin (1) to lever (3).
Using the extractor 99347074 (1), remove the pin (2) of the
swivel head from the steering lever of the stub axle (3).
With the hydraulic jack under the bottom suspension arm (3)
oppose the action of the transverse leaf spring.
Remove the nuts (2 - 6) securing the swivel head pin (1 - 5)
to the stub axle (4).
Using the extractor 99347074 (2), remove the link pins (1 -
3) of the stub axle (4) and put this aside.
Fit the proper setscrew wrench into kingpin (1) to
stop its rotation, if required.
NOTE
To block rotation of the swivel head pins (1 - 5),
insert a suitable Allen wrench into the hexagon
sunk into them.
NOTE
18
AXLE 5817
D
AILY
Base - May 2004
Insert the pins of the swivel heads (1 - 2) of the top and
bottom suspension arms into the seats of the stub axle (3).
Then screw on the self-locking nuts (5) and lock them at the
required torque.
61671
Figure 21
Refitting
Figure 22
52259
Connect the pin of the swivel head (1) of the power steering
tie to the lever (3) of the stub axle (6) and tighten the fixing
nut (2) to the required torque.
Mount the guard (4) on the stub axle and secure it, tightening
the screws (5) to the required torque.
Refit the wheel hub as described in the relevant chapter
(operation 520620).
Figure 23
61672
Connect stabiliser bar (3) to crankpin (2), screw new nut (1)
and tighten it to the prescribed torque.
Once removed, self-locking nuts (5) must not be
reused.
To block rotation of the swivel head pins (1 - 2),
insert a suitable Allen wrench (4) into the hexagon
sunk into them.
NOTE
Once removed, self-locking nuts (2) must not be
reused.
To block rotation of the swivel head pin (1), insert
a suitable Allen wrench into the hexagon sunk into
them.
NOTE
AXLE 5817
19
D
AILY
20
AXLE 5817
D
AILY
Base - May 2004
AXLE 5818
21
D
AILY
Axle 5818
Page
DESCRIPTION
23
. . . . . . . . . . . . . . . . . . . . . . . . . .
SPECIFICATION AND DATA
23
. . . . . . . . . . . . . .
TIGHTENING TORQUES
24
. . . . . . . . . . . . . . . . .
TOOLS
25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OVERHAULING AXLE 5818
26
. . . . . . . . . . . . . . .
- Replacing phonic wheel
26
. . . . . . . . . . . . . . . . . .
- Refitting
27
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STUB AXLE REMOVAL AND REFITTING
27
. . . .
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст