KIA Sorento (2019 year). Instruction — part 32
7 61
Maintenance
Description
Fuse rating
Protected component
AIR BAG IND.
10A
Cluster, A/C Control Module
A/CON 3
30A
Blower Motor
A/CON 2
7.5A
A/C Control Module (Auto)
START
7.5A
E/R Junction Block (Start Relay), Transmission Range Switch
AIR BAG
15A
SRS Control Module, Passenger Occupant Detection Sensor
MODULE 2
10A
Crash Pad Switch, Tire Pressure Monitoring Module, 4WD ECM, Lane Departure Warning Module, Console
Switch, Rear Parking Assist Sensor LH/RH, Rear Parking Assist Buzzer, Rear Parking Assist Sensor LH/RH
(Center), Blind Spot Detection Radar LH/RH, Electronic Parking Brake Module, Front Parking Assist Sensor
LH/RH, Front Parking Assist Sensor LH/RH
ACC
10A
Power Outlet Relay, BCM, Audio, A/V & Navigation Head Unit, Surround View Monitoring Unit, Smart Key
Control Module, AMP, USB Charger, Phone Wireless Charger
MODULE 4
10A
Head Lamp Leveling Device Actuator LH/RH, MUT
BRAKE SWITCH
7.5A
Smart Key Control Module, Stop Lamp Switch
MODULE 3
10A
A/C Control Module, A/V & Navigation Head Unit, Electro Chromic Mirror, Driver IMS Control Module, ATM
Shift Lever Indicator, Rear Seat Warmer LH, Front Air Ventilation Control Module, Front Seat Warmer
Control Module, Dynamic Bending Light Unit
MODULE 1
10A
BCM, Stop Lamp Switch, Driver/Passenger Doormodule, Sport Mode Switch
MODULE 8
15A
Smart Key Control Module, Immobilizer Module
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 61
Maintenance
62
7
Description
Fuse rating
Protected component
A/CON (RR)
15A
ICM Relay Box (Rear Blower Motor Relay)
SUNROOF 2
20A
Sunroof Control Module (Roller)
SUNROOF 1
20A
Sunroof Control Module (Glass)
CLUSTER
10A
Instrument Cluster
GATEWAY
10A
Gateway (MCU IG1)
IMMO.
10A
Smart Key Control Module, Immobilizer Module
IG1
15A
E/R Junction Block (Fuse - MDPS 3, MODULE, TCU 1), PCB Block (Fuse - ABS 3, SENSOR 6, ECU 1)
MULTIMEDIA
15A
USB Charger, Audio, A/V & Navigation Head Unit
MEMORY 2
10A
Instrument Cluster, A/C Control Module, Rear A/C Control Module, Electro Chromic Mirror,
Driver/Passenger Door Module, Passenger Power Window Switch, Driver IMS Control Module
DOOR LOCK
20A
Door Lock Relay, Door Unlock Relay, Tail Gate Relay, DRIVER/PASSENGER/RL/RR DOOR MODULE
MODULE 9
10A
Start/Stop Button Switch, Smart Key Control Module
WASHER
15A
BCM, Multifunction Switch
AEB
10A
FCA (Forward Collision-Avoidance Assist) Unit
MDPS
7.5A
MDPS UNIT (COLUMN TYPE), Steering Angle Sensor
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 62
7 63
Maintenance
Description
Fuse rating
Protected component
HEATED
STEERING
15A
BCM
WIPER (RR)
15A
Rear Wiper Relay, Rear Wiper Motor
A/CON 1
7.5A
A/C Control Module, E/R Junction Block (Blower Relay), ICM Relay Box (Rear Blower Motor Relay)
HEATED MIRROR
10A
A/C Control Module, Driver/Passenger Power Outside Mirror
MODULE 5
10A
BCM, Smart Key Control Module
MODULE 6
7.5A
Surround View Monitoring Unit, Rear A/C Control Module, Rear Seat Warmer LH, Front Air Ventilation
Control Module, Front Seat Warmer Control Module, AC Inverter Module, Crash Pad Switch
S/HEATER (RR)
15A
Rear Seat Warmer LH
S/HEATER (FRT)
20A
Front Air Ventilation Control Module, Front Seat Warmer Control Module
P/WINDOW (RH)
25A
Rear Safety Power Window RH, Rear Power Window Switch RH, Passenger Safety Power Window Module,
Passenger Door Module, Passenger Power Window Switch
AMP 1
25A
AMP
MODULE 7
7.5A
Gateway (MCU B+), Key Solenoid, Tire Pressure Monitoring Module, MUT
INTERIOR LAMP
10A
Glove Box Lamp, Ignition Key Ill. & Door Warning Switch, Driver Foot Lamp, Vanity Lamp LH/RH Switch,
Cargo Lamp, Center Room Lamp, Overhead Console Lamp, Rear Personal Lamp LH/RH
FUEL LID
10A
Fuel Filler & Tail Gate Switch
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 63
Maintenance
64
7
Description
Fuse rating
Protected component
P/SEAT (DRV)
30A
Driver IMS Control Module, Driver Seat Manual Switch
P/SEAT (PASS)
30A
Passenger Seat Manual Switch
AMP 2
25A
AMP
P/WINDOW (LH)
25A
Rear Safety Power Window LH, Rear Power Window Switch LH, Driver Safety Power Window Module,
Driver Door Module
MODULE 10
10A
BCM, RAIN SENSOR
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 64
7 65
Maintenance
Engine compartment fuse panel
OUMA078262
OUM074023
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 65
Maintenance
66
7
Description
Fuse rating
Protected component
MULTI
FUSE
MDPS 1
100A
MDPS Unit (Rack Type)
MDPS 2
80A
MDPS Unit (Column Type)
COOLING
FAN 1
80A
Cooling Fan 1 Relay
B+1
60A
IGPM (Fuse - S/HEATER (RR), P/SEAT (DRV), P/SEAT (PASS), P/WINDOW (LH))
B+2
60A
IGPM (Fuse - S/HEATER (FRT), P/WINDOW (RH), FULE LID, AMP 1, AMP 2, MUDULE 7, MODULE
10)
B+3
60A
IGPM (IPS 1, Fuse - Leak Current Autocut Device Fuse - MULTIMEDIA, MEMORY 2), INTERIOR
LAMP
B+5
50A
IGPM (IPS 0/IPS 1/IPS 2/IPS 3/IPS 4/IPS 5/IPS 6/IPS 7/IPS 8, Fuse - S/ROOF 1)
FUSE
B+4
40A
IGPM (Fuse - DOOR LOCK, MUDULE 8, MODULE 9, BRAKE SWITCH, A/CON (RR), S/ROOF 2)
ABS 2
20A
ESC Module
ABS 1
40A
ESC Module, Multipurpose Check Connector
INVERTER
30A
AC Inverter Module
POWER TAIL
GATE
30A
Power Tail Gate Module
TRAILER
30A
Trailer Power Outlet
BLOWER
40A
Blower Relay
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 66
7 67
Maintenance
Description
Fuse rating
Protected component
FUSE
AMS
10A
Battery Sensor
TCU 2
15A
TCU
EPB 1
15A
Electronic Parking Brake Module
EPB 2
15A
Electronic Parking Brake Module
4WD
20A
4WD ECM
ECU 2
15A
PCM
TCU 3
15A
TCU
MDPS 3
7.5A
MDPS Unit (Rack Type)
TCU 1
10A
Transmission Range Switch
B/UP LAMP
7.5A
IGPM(B/UP LAMP SIGNAL INPUT)
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 67
Maintenance
68
7
Description
Fuse rating
Protected component
ABS 3
7.5A
ESC Control Module, Multipurpose Check Connector
ECU 1
10A
PCM
IG 2
40A
RLY. 4 (Start Relay), PDM (IG2) Relay, Ignition Switch
POWER
OUTLET 1
20A
Front Power Outlet & Cigarette Lighter
SENSOR 6
7.5A
GCU
POWER
OUTLET 2
20A
Front Power Outlet
MODULE
7.5A
Smart Cruise Control Radar
ECU 4
20A
[Theta II 2.4L Engine] PCM (E-CVVT Relay)
WIPER 1
25A
Wiper Low Relay
DEICER
15A
Front Deicer Relay
ECU 5
20A
[Theta II 2.4L Engine] PCM (E-CVVT Relay)
IG 1
40A
PDM (IG1) Relay, PDM (ACC) Relay, Ignition Switch
SENSOR 4
10A
[Theta II 2.4L Engine] Oxygen Sensor (Up/Down)
[Lambda II 3.3L Engine] PCM, Oxygen Sensor #1/#2/#3/#4
SENSOR 5
15A
[Theta II 2.4L Engine] PCM
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 68
7 69
Maintenance
Description
Fuse rating
Protected component
WIPER 2
7.5A
Wiper Parking Signal
POWER
OUTLET 3
20A
Rear Power Outlet
SENSOR 1
20A
[Theta II 2.4L Engine] Ignition Coil #1/#2/#3/#4 [Lambda II 3.3L Engine] Ignition Coil #1/#2/#3/#4/#5/#6,
Condecser #1/#2
SENSOR 3
10A
[Theta II 2.4L Engine] Fuel Pump Relay [Lambda II 3.3L Engine] Fuel Pump Relay, PCM
POWER
OUTLET 4
20A
Luggage Power Outlet
REAR
HEATED
40A
Rear Defogger Relay
SENSOR 2
10A
[Theta II 2.4L Engine] E/R Junction Block (Cooling Fan 1 Relay), Oil Control Valve (Exhaust), Purge Control
Solenoid Valve, Canister Close Valve, Variable Intake Solenoid Valve
[Lambda II 3.3L Engine] E/R Junction Block (Cooling Fan 1 Relay), Variable Intake Solenoid Valve #1/#2, Purge
Control Solenoid Valve, Oil Control Valve #1/#2/#3/#4 (Intake/Exhaust), PCM, Canister close valve, A/CON
Compressor Relay
FUEL PUMP
20A
Fuel Pump Relay
HORN
15A
Horn Relay
B/ALARM
HORN
15A
Burglar Alarm Horn Relay
A/C
10A
A/CON Compressor
SPARE 1
15A
DUMMY
SENSOR 7
20A
NOx SENSOR
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 69
Maintenance
70
7
Relay NO.
Relay Name
Type
E31
Blower Relay
MICRO
E32
START #2 Relay
MICRO
E33
Cooling Fan #1 Relay
MINI
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 70
7 71
Maintenance
LIGHT BULBS
Bulb replacement precaution
Please keep extra bulbs on hand
with appropriate wattage ratings in
case of emergencies.
Refer to “Bulb Wattage” in chapter 8.
When changing lamps, first turn off
the engine at a safe place, firmly
apply the parking brake and detach
the battery’s negative (-) terminal.
Use only bulbs of the specified
wattage.
• Lamp part malfunction due to
net-work failure
The headlamp, taillight, and fog light
may light up when the head lamp
switch is turned ON, and not light up
when the taillight or for light switch is
turned ON. This may be cause by
network failure or vehicle electrical
control system malfunction. If there is
a problem, we recommend the sys-
tem be serviced by an authorized Kia
dealer.
• Lamp part malfunction due to elec-
trical control system stabilization
A normally functioning lamp may
flicker momentarily. This momentary
occurrence is due to stabilization
function of the vehicle's electrical on
control system. If the lamp soon
returns to normal, the vehicle does
not require service.
However, if the lamp goes out after
the momentary flickering, or the flick-
ering continues, we recommend the
system be serviced by an authorized
Kia dealer.
WARNING
- Working on
the lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.
CAUTION -
Light replace-
ment
Be sure to replace the burned-
out bulb with one of the same
wattage rating. Otherwise, it
may cause damage to the fuse
or electric wiring system.
CAUTION -
Headlamp
Lens
To prevent damage, do not
clean the headlamp lens with
chemical solvents or strong
detergents.
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 71
Maintenance
72
7
✽
✽
NOTICE
• If the light bulb or lamp connector
is removed while the lamp is still
on, the fuse box's electronic sys-
tem may log it as a malfunction.
Therefore, a lamp malfunction
incident may be recorded as a
Diagnostic Trouble Code (DTC) in
the fuse box.
• It is normal for an operating lamp
to flicker momentarily. This is due
to a stabilization function of the
vehicle’s electronic control device.
If the lamp lights up normally
after momentarily blinking, then
it is functioning as normal.
However, if the lamp continues to
flicker several times or turns off
completely, there may be an error
in the vehicle’s electronic control
device. Please have the vehicle
checked by an authorized Kia
dealer immediately.
✽
✽
NOTICE
We recommend that the headlight
aiming be adjusted after an accident
or after the headlight assembly is rein-
stalled at an authorized Kia dealer.
✽
✽
NOTICE
After driving in heavy rain or wash-
ing, headlamp and taillamp lenses
could appear frosty. This condition is
caused by the temperature differ-
ence between the lamp inside and
outside. This is similar to the conden-
sation on your windows inside your
vehicle during the rain and doesn’t
indicate a problem with your vehicle.
If the water leaks into the lamp bulb
circuitry, we recommend that you
have the vehicle checked by an
authorized Kia dealer.
If you don’t have the necessary tools,
the correct bulbs and the expertise,
consult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be removed
before you can get to the bulb. This is
especially true if you have to remove
the headlamp assembly to get to the
bulb(s).
Removing/installing the headlamp
assembly can result in damage to
the vehicle.
If non-genuine parts or substandard
bulbs are used, it may lead to blow-
ing a fuse or other wiring damages.
Do not install extra lamps or LEDs to
the vehicle. If additional lights are
installed, it may lead to lamp mal-
functions and flickering. Additionally,
the fuse box and other writing may
be damaged.
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 72
7 73
Maintenance
Light bulb position (Front)
(1) Headlamp (Low) (Bulb type)
(2) Headlamp (High) (Bulb type)
(3) Front turn signal lamp (Bulb type)
(4) Position lamp (LED type)
(5) Side marker (LED type)
(6) Headlamp (Low/High) (LED type)
(7) Headlamp (Low Assist) (LED type)
(8) Front turn signal lamp (LED type)
(9) Position lamp / Day time running
lamp (LED type)
(10) Front fog lamp (Bulb type)
(11) Front fog lamp (LED type)
OUMA078217
OUMA078218
■ Head lamp – Type B
■ Head lamp – Type A
OUMA078219
OUMA078263
OUMA078264
■ Fog lamp - Type A
■ Fog lamp - Type B
■ Fog lamp - Type C
UMA PE USA 7.qxp 12/22/2017 4:51 PM Page 73
Maintenance
74
7
Light bulb position (Rear)
(1) Stop and tail lamp (Bulb type)
(2) Tail lamp (Bulb type)
(3) Rear turn signal lamp (Bulb type)
(4) Back Up lamp (Bulb type)
(5) Side marker (Bulb type)
(6) Tail lamp (LED type)
(7) Stop and tail lamp (LED type)
(8) Side marker (LED type)
(9) License plate lamp (Bulb type)
(10) High mounted stop lamp (LED
type)
OUMA078221
OUMA078222
■ Rear combination lamp - Type B
■ Rear combination lamp - Type A
OUMA078265
OUMA078225
■ High mounted stop lamp
■ License plate lamp
UMA PE USA 7.qxp 12/22/2017 4:52 PM Page 74
7 75
Maintenance
Light bulb position (Side)
(1) Side repeater lamp (LED type)
Headlamp (Low beam) bulb
replacement
(Headlamp Type A)
1. Open the hood.
2. Remove the headlamp bulb cover
by turning it counterclockwise.
3. Remove the bulb-socket from the
headlamp assembly by turning the
bulb-socket counterclockwise until
the tabs on the bulb-socket align
with the slots on the headlamp
assembly.
4. Remove the bulb from bulb-socket
by pulling it out.
5. Insert a new bulb by inserting it
into the bulb-socket.
6. Install the bulb-socket in the head-
lamp assembly by aligning the
tabs on the bulb-socket with the
slots in the headlamp assembly.
Push the bulb-socket into the
headlamp assembly and turn the
bulb-socket clockwise.
7. Install the headlamp bulb cover by
turning it clockwise.
OUM078250L
OUMA078226
UMA PE USA 7.qxp 12/22/2017 4:52 PM Page 75
Maintenance
76
7
Headlamp bulb
• Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit.
A bulb should be operated only
when installed in a headlight.
• If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
• Wear eye protection when chang-
ing a bulb. Allow the bulb to cool
down before handling it.
Headlamp (High beam) bulb
replacement
(Headlamp Type A)
1. Open the hood.
2. Remove the headlamp bulb cover
by turning it counterclockwise.
3. Disconnect the headlamp bulb
socket-connector.
4. Remove the bulb-socket from the
headlamp assembly by turning the
bulb-socket counterclockwise until
the tabs on the bulb-socket align
with the slots on the headlamp
assembly.
WARNING
- Halogen
bulbs
• Halogen bulbs contain pres-
surized gas that will produce
flying pieces of glass if broken.
• Always handle them carefully,
and avoid scratches and abra-
sions. If the bulbs are lit, avoid
contact with liquids.
OHD076046
OUMA078227
UMA PE USA 7.qxp 12/22/2017 4:52 PM Page 76
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст