KIA Rondo (2017 year). Instruction — part 14
Features of your vehicle
✽ NOTICE
Manual heating and air condi-
tioning
•
To turn the automatic operation off,
select any button of the following:
The heating and cooling system can
- Mode selection button
be controlled manually by pressing
- Air conditioning button
buttons or turning knob(s) other than
- Front windshield defrost button
the AUTO button. In this case, the
(Press the button one more time
system works sequentially according
to deselect the front windshield
to the order of buttons or knob(s)
defroster function. The AUTO
selected.
sign will illuminate on the infor-
1. Start the engine.
mation display once again.)
- Fan speed control button
ORP042151
2. Set the mode to the desired position.
The selected function will be con-
For improving the effectiveness of
✽ NOTICE
trolled manually while other func-
heating and cooling:
Never place anything over the sen-
tions operate automatically.
- Heating:
sor located on the instrument panel
•
For your convenience and to
to ensure better control of the heat-
- Cooling:
improve the effectiveness of the
ing and cooling system.
climate control, use the AUTO
button and set the temperature to
23°C (73°F).
4 136
Features of your vehicle
3. Set the temperature control to the
Mode selection
desired position.
4. Set the air intake control to the
outside (fresh) air position.
5. Set the fan speed control to the
desired speed.
6. If air conditioning is desired, turn
the air conditioning system on.
Press the AUTO button in order to
convert to full automatic control of
the system.
ORP043141C
The mode selection button controls the direction of the airflow in the vehicle.
If you push the button once, the corresponding switch will turn on, and if you
push the button again, the switch will turn off.
4 137
Features of your vehicle
■ Type A
■ Type B
Floor-Level (A, C, D, E)
Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and
side window defrosters.
Defrost-Level (A, D)
ORP042152
ORP042143
Instrument panel vents
Most of the air flow is directed to the
Face-Level (B, D, F)
The outlet vents can be opened or
windshield with a small amount of air
directed to the side window defrosters.
closed separately using the thumb-
wheel. (if equipped)
Air flow is directed toward the upper
Also, you can adjust the direction of
body and face. Additionally, each
Also you may select 2~3 modes at
air delivery from these vents using
outlet can be controlled to direct the
the same time.
the vent control lever as shown.
air discharged from the outlet.
- face (
) + floor (
) mode
- face (
) + defrost (
) mode
- floor (
) + defrost (
) mode
- face
(
)
+ floor
(
)
+ defrost
(
) mode
* : if equipped
4 138
Features of your vehicle
Temperature control
Operate the driver’s side temperature
control to adjust the driver side tem-
■ Driver’s side
■ Passenger’s side
perature. Operate the passenger’s
side temperature control to adjust the
passenger side temperature.
ORP046154L
Adjusting the driver and passenger
ORP046353L
side temperature equally
The temperature will increase to the
• Press the “SYNC” button to adjust
maximum (HI) by turning the knob to
the driver and passenger side tem-
the right extremely.
perature equally.
The temperature will decrease to the
The passenger side temperature
minimum (Lo) by turning the knob to
will be set to the same temperature
the left extremely.
as the driver side temperature.
When turning the knob, the tempera-
• Turn the driver side temperature
ture will increase or decrease by
control knob. The driver and pas-
0.5°C/1°F. When set to the lowest
senger side temperature will be
temperature setting, the air condi-
adjusted equally.
tioning will operate continuously.
4 139
Features of your vehicle
Adjusting the driver and passenger
✽ NOTICE
Air intake control
side temperature individually
•
If the battery has been discharged
■ Type A
■ Type B
• Press the “SYNC” button again to
or disconnected, the temperature
adjust the driver and passenger
mode display will reset to
side temperature individually. The
Centigrade.
illumination of button turns off.
•
If you re-connect the battery after
• Operate the driver side tempera-
it has been completely discharged
ture control knob to adjust the driv-
or after it has been disconnected
er side temperature.
from the vehicle, the system will
be initiated and the display will
• Operate the passenger side tem-
first show
23°C (73°F) on the
perature control knob to adjust the
screen which is the initial setting.
passenger side temperature.
ORP042156
Temperature conversion
This is used to select the outside
(fresh) air position or recirculated air
You can switch the temperature
position.
mode from Centigrade to Fahrenheit
as follows:
To change the air intake control posi-
tion, push the control button.
While pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The display will change from
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
4 140
Features of your vehicle
Recirculated air position
✽ NOTICE
WARNING - Sleeping with
With the recirculated air
Prolonged operation of the heater in
position selected, air
AC on
the recirculated air position (with-
from the passenger
out air conditioning selected) may
Do not sleep in a vehicle with
compartment will be
cause fogging of the windshield and
the air conditioning or heating
drawn through the heat-
side windows and the air within the
system on as this may cause
ing system and heated
passenger compartment may
serious harm or death due to a
or cooled according to
become stale.
drop in the oxygen level and/or
the function selected.
In addition, prolonged use of the air
body temperature.
conditioning with the recirculated
air position selected will result in
Outside (fresh) air position
excessively dry air in the passenger
With the outside (fresh)
WARNING - Recirculated
compartment.
air position selected, air
air
enters the vehicle from
Continued use of the climate
outside and is heated or
WARNING - Reduced visi-
control system in the recirculat-
cooled according to the
bility
ed air position can cause
function selected.
drowsiness or sleepiness, and
Continued use of the climate
control system in the recirculat-
loss of vehicle control. Set the
air intake control to the outside
ed air position may allow
humidity to increase inside the
(fresh) air position as much as
possible while driving.
vehicle which may fog the glass
and obscure visibility.
4 141
Features of your vehicle
Fan speed control
Air conditioning (if equipped)
OFF mode
■ Type A
■ Type B
■ Type A
■ Type B
■ Type A
■ Type B
ORP042157
ORP042158
ORP042159
The fan speed can be set to the
Press the OFF button to turn off the
Press the A/C button to turn the air
desired speed by operating the fan
air climate control system. However,
conditioning system on
(indicator
speed control button.
you can still operate the air intake
light will illuminate).
buttons as long as the ignition switch
To change the fan speed, press the
Press the button again to turn the air
is in the ON position.
upper button (
) for higher speed, or
conditioning system off.
press the lower button (
) for lower
speed.
Pressing the OFF button turns off the
fan.
4 142
Features of your vehicle
Climate information screen selec-
System operation
Operation Tips
tion (for type B)
Ventilation
•
To keep dust or unpleasant fumes
from entering the vehicle through
1. Set the mode to the
position.
the ventilation system, temporarily
2. Set the air intake control to the
set the air intake control to the
outside (fresh) air position.
recirculated air position. Be sure to
3. Set the temperature control to the
return the control to the fresh air
desired position.
position when the irritation has
passed to keep fresh air in the
4. Set the fan speed control to the
vehicle. This will help keep the driv-
desired speed.
er alert and comfortable.
•
Air for the heating/cooling system
Heating
is drawn in through the grilles just
1. Set the mode to the
position.
ahead of the windshield. Care
ORP042160
2. Set the air intake control to the
should be taken that these are not
Press the climate information screen
blocked by leaves, snow, ice or
outside (fresh) air position.
selection button to display climate
other obstructions.
3. Set the temperature control to the
information on the screen.
desired position.
•
To prevent interior fog on the wind-
shield, set the air intake control to
4. Set the fan speed control to the
the fresh air position and fan speed
desired speed.
to the desired position, turn on the
5. If dehumidified heating is desired,
air conditioning system, and adjust
turn the air conditioning system (if
the temperature control to desired
equipped) on.
temperature.
• If the windshield fogs up, set the
mode to the
or
position.
4 143
Features of your vehicle
Air conditioning
✽ NOTICE
CAUTION
Kia Air Conditioning Systems are
•
When using the air conditioning
filled with refrigerant*.
•
The refrigerant system should
system, monitor the temperature
only be serviced by trained
gauge closely while driving up
1. Start the engine. Push the air con-
and certified technicians to
hills or in heavy traffic when out-
ditioning button.
insure proper and safe opera-
side temperatures are high. Air
2. Set the mode to the
position.
tion.
conditioning system operation
3. Set the air intake control to the
•
The refrigerant system should
may cause engine overheating.
outside air or recirculated air posi-
be serviced in a well-ventilat-
Continue to use the blower fan but
tion.
ed place.
turn the air conditioning system
4. Adjust the fan speed control and
off if the temperature gauge indi-
•
The air conditioning evapora-
temperature control to maintain
cates engine overheating.
tor (cooling coil) shall never
maximum comfort.
•
When opening the windows in
be repaired or replaced with
humid weather air conditioning
one removed from a used or
may create water droplets inside
salvaged vehicle and new
the vehicle. Since excessive water
replacement MAC evaporators
droplets may cause damage to
shall be certified (and labeled)
electrical equipment, air condi-
as meeting SAE Standard
tioning should only be used with
J2842.
the windows closed.
4 144
Features of your vehicle
Air conditioning system operation tips
•
When using the air conditioning
Climate control air filter
system, you may notice clear water
•
If the vehicle has been parked in
dripping (or even puddling) on the
direct sunlight during hot weather,
Outside air
ground under the passenger side
open the windows for a short time
of the vehicle. This is a normal sys-
to let the hot air inside the vehicle
Recirculated
tem operation characteristic.
escape.
air
•
Operating the air conditioning sys-
•
To help reduce moisture inside of
the windows on rainy or humid
tem in the recirculated air position
provides maximum cooling, how-
days, decrease the humidity inside
the vehicle by operating the air
ever, continual operation in this
conditioning system.
mode may cause the air inside the
Blower
vehicle to become stale.
Heater core
•
During air conditioning system
Climate control
Evaporator
•
During cooling operation, you may
air filter
core
operation, you may occasionally
1LDA5047
notice a slight change in engine
occasionally notice a misty air flow
because of rapid cooling and
The climate control air filter installed
speed as the air conditioning com-
humid air intake. This is a normal
behind the glove box filters the dust
pressor cycles. This is a normal
system operation characteristic.
or other pollutants that come into the
system operation characteristic.
vehicle from the outside through the
•
Use the air conditioning system
heating and air conditioning system.
every month only for a few minutes
If dust or other pollutants accumulate
to ensure maximum system per-
in the filter over a period of time, the
formance.
air flow from the air vents may
decrease, resulting in moisture accu-
mulation on the inside of the wind-
shield even when the outside (fresh)
air position is selected. If this hap-
pens, we recommend that the cli-
mate control air filter be replaced by
an authorized Kia dealer.
4 145
Features of your vehicle
✽ NOTICE
Checking the amount of air
conditioner refrigerant and
WARNING
• Replace the filter according to the
compressor lubricant
Because the refriger-
Maintenance Schedule.
If the vehicle is being driven in
ant is at very high
When the amount of refrigerant is
severe conditions such as dusty or
low, the performance of the air con-
pressure, the air con-
rough roads, more frequent cli-
ditioning
system
ditioning is reduced. Overfilling also
mate control air filter inspections
has a negative influence on the air
should only be serv-
and changes are required.
iced by trained and certified
conditioning system.
• When the air flow rate suddenly
technicians. It is important that
Therefore, if abnormal operation is
decreases, we recommend that the
the correct type and amount of
found, have the system inspected by
system should be checked at an
oil and refrigerant is used, oth-
an authorized Kia dealer.
authorized Kia dealer.
erwise damage to the vehicle
and personal injury may occur.
4 146
Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
•
For maximum defrosting, set the
Manual climate control system
WARNING - Windshield
temperature control to the extreme
To defog inside windshield
heating
right/hot position and the fan speed
control to the highest speed.
Do not use the
position dur-
ing cooling operation in extreme-
•
If warm air to the floor is desired
ly humid weather. The difference
while defrosting or defogging, set
between the temperature of the
the mode to the floor-defrost posi-
outside air and the windshield
tion.
could cause the outer surface of
•
Before driving, clear all snow and
the windshield to fog up, causing
ice from the windshield, rear win-
loss of visibility. In this case, set
dow, outside rear view mirrors, and
the mode selection knob or but-
all side windows.
ton to the
position and fan
•
Clear all snow and ice from the
speed control knob or button to a
hood and air inlet in the cowl grill to
lower speed.
ORP042161
improve heater and defroster effi-
ciency and to reduce the probabili-
1. Select any fan speed except “0”
ty of fogging up the inside of the
position.
windshield.
2. Select desired temperature.
3. Press the
button.
4. The outside
(fresh) air will be
selected automatically. If the
position is selected, air condition-
ing
(if equipped) will also be
selected automatically.
If the air conditioning and/or outside
(fresh) air position are not selected
automatically, press the correspon-
ding button manually.
4 147
Features of your vehicle
To defrost outside windshield
Automatic climate control
If the air conditioning and outside
system
(fresh) air position are not selected
automatically, adjust the correspon-
To defog inside windshield
ding button manually. If the
posi-
tion is selected, lower fan speed is
adjusted to a higher fan speed.
ORP042162
1. Set the fan speed to the highest
position.
ORP042163
2. Set the temperature to the
1. Set the fan speed to the desired
extreme hot position.
position.
3. Press the
button.
2. Select desired temperature.
4. The outside (fresh) air and air con-
3. Press the defroster button (
).
ditioning will be selected automat-
4. The outside (fresh) air position will
ically.
be selected automatically and the
If the air conditioning is not selected
air conditioning will turn on
automatically press the correspon-
according to the detected ambient
ding button manually.
temperature.
4 148
Features of your vehicle
To defrost outside windshield
Auto defogging system
The auto defogging system operates
(Only for automatic climate con-
when the climate control system is on.
trol system, if equipped)
■ Type A
✽ NOTICE
The auto defogging system may not
operate normally, when the outside
temperture is below -15 °C.
ORP042164
ORP042249
1. Set the fan speed to the highest
■ Type B
position.
2. Set the temperature to the
extreme hot (HI) position.
3. Press the defroster
button.
4. The outside (fresh) air position will
be selected automatically and the
air conditioning will turn on
according to the detected ambient
temperature.
ORP042250
Auto defogging reduces the possibil-
ity of fogging up the inside of the
windshield by automatically sensing
the moisture of inside the windshield.
4 149
Features of your vehicle
This indicator illuminates
If your vehicle is equipped with the
✽ NOTICE
when the auto defogging
auto defogging system, it is automat-
When above indicator is turned on,
system senses the mois-
ically activated when the conditions
the mode indicator will goes out.
ture of inside the wind-
are met. To cancel or reset the Auto
If the mode button is manually
shield and operates.
Defogging system, press the front
selected, the selected mode is dis-
windshield defroster button for 3 sec-
played for 3 seconds and then goes
onds when the ignition switch is in
If more moisture is in the vehicle,
out. However, the mode will still
the ON position. When the Auto
higher steps operate as follow.
work with the selected mode.
Defogging System is Canceled, ADS
OFF symbol will blink 3 times and the
✽ NOTICE
Step 1 : Outside air position
ADS OFF will be displayed on the cli-
If the A/C off is manually selected
mate control information screen.
Step 2 : Blowing air flow toward the
When the Auto Defogging System is
while the auto defogging system is
windshield
on, the auto defogging indicator will
reset, ADS OFF symbol will blink 6
Step 3 : Operating the air conditioning
blink 3 times to give notice that the
times without a signal.
Step 4 : Increasing air flow toward
A/C off can not be selected.
In case of automatic climate control
the windshield
system with a climate button, it blinks
defroster button indicator. Blinking
CAUTION
time is same as above.
Do not remove the sensor cover
To use the auto defogging system
located on the upper end of the
again, follow the procedures men-
driver side windshield glass.
tioned above.
Damage to the system parts
If the battery has been disconnected
could occur and may not be cov-
or discharged, it resets to the auto
ered by your vehicle warranty.
defogging status.
4 150
Features of your vehicle
CLEAN AIR (IF EQUIPPED)
ORP046165N
When the ignition switch is in the ON
position, the clean air function turns
on automatically.
Also, the clean air function turns off
automatically, when the ignition
switch turns to the OFF position.
4 151
Features of your vehicle
STORAGE COMPARTMENT
Center console storage
Glove box
CAUTION
•
To avoid possible theft, do not
leave valuables in the storage
compartment.
•
Always keep the storage com-
partment covers closed while
driving. Do not attempt to
place so many items in the
storage compartment that the
storage compartment cover
can not close securely.
ORP042166
ORP042167
To open the center console storage,
To open the glove box, pull the handle
WARNING - Flammable
pull up the lever.
and the glove box will automatically
materials
open. Close the glove box after use.
Do not store, propane cylinders,
Always keep the glove box closed
or other flammable/explosive
while the vehicle is in operation.
materials in the vehicle. These
items may catch fire and/or
explode if the vehicle is
exposed to hot temperatures for
extended periods.
4 152
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст