KIA Spectra (2009 year). Instruction — part 7
Knowing your vehicle
COMPACT DISC PLAYER OPERATION (M445) (IF EQUIPPED)
1
2
1. CD/AUX Select Button
3
2. TRACK UP/DOWN Button
3. FF/REW Button
4
4. REPEAT (RPT) Button
5
5. CD SCAN Button
6. CD EJECT Button
6
7. RANDOM (RDM) Button
7
8
9
LD 455 NA
3 99
Knowing your vehicle
1. CD/AUX Select Button
(Continued)
✽ NOTICE
Please refer to the manual of CD-
CD Select
•
If the AUX device is not connect-
R/CD-RW recoder or CD-R/CD-
ed, you cannot switch to AUX-IN
• Insert the CD with the label facing
RW software for more informa-
1
mode.
upward.
tion on finalization process.
•
When the AUX device is discon-
• Insert the CD to start CD playback,
• Depending on the recording sta-
nected while in AUX-IN mode, the
2
during radio operation.
tus, some CD-Rs/CD-RWs may
unit automatically switches its
not be played on this unit.
• When a disc is in the CD deck, if
mode to last selected mode (CD
you press the CD/AUX button the
mode or RADIO mode).
3
AUX-IN Select
CD player will begin playing even if
•
The quality of sound may be
the radio player is being used.
• When the AUX device (such as
defected or distorted when the
4
• The CD/AUX player can be used
portable MP3 players) is connect-
unit's EQ (BASS/MID/TREBLE)
ed to vehicle's AUX-IN terminal,
control and AUX device's EQ con-
when the ignition switch is in either
the “ON” or “ACC” position.
you can switch to AUX-IN mode by
trol are both enabled (not flat).
5
pressing CD/AUX button.
When you want to use the unit's
• Push the CD/AUX button to turn on
• With a CD loaded and AUX device
EQ control feature, disable the
that function without pushing the
connected at the same time, this
AUX device's EQ control feature,
6
Power ON-OFF control knob.
button switches between AUX-IN
and vice versa.
mode and CD mode.
•
When using a portable audio
✽ NOTICE
7
device connected to the power out-
• Do not stick paper or tape etc., on
let, noise may occur during play-
AUX
3.5mm STEREO MINI PLUG
the label side or the recording side
back. If this happens, use the
8
of any discs, as it may cause a mal-
power source of the portable audio
function.
device.
• The unit cannot play a CD-
9
R(Recordable CD) and CD-
RW(Rewritable CD) that is not
finalized.
(Continued)
3 100
Knowing your vehicle
2. TRACK UP/DOWN Button
4. REPEAT (RPT) Button
6. CD EJECT Button
• The desired track on the disc cur-
• To repeat the track you are current-
When the
button is pressed with a
rently being played can be select-
ly listening to, press the RPT but-
CD loaded, the CD will eject.
ed using the track number.
ton. To cancel, press it again.
1
Forcing to eject : To force to eject a
• Press
button once to skip for-
• If you do not release RPT opera-
CD, press this button for more than 3
ward to the beginning of the next
tion when the track ends, it will
seconds.
2
track.
automatically be replayed.
(Do this only when a CD is jammed
Press
within a second after
This process will be continued until
and you can not eject it in the normal
you push the button again or turn
3
playback begins to quickly move
way - e.g.) in case that you have
backward through a CD.
the Power OFF then ON.
inserted 2 CDs by mistake)
If you press
after more than a
4
second, it will take you to the
5. CD SCAN Button
7. RANDOM (RDM) Button
beginning of the track you are now
• To playback the first 10 seconds of
With random, you can listen to the
listening to.
each track, press the CD SCAN
5
tracks in random, rather than
button.
sequential order.
3. FF/REW Button
• Press the CD SCAN button again
6
To use random, do the following:
within
10 sec. when you have
If you want to fast forward or reverse
Press the RDM button to listen to
reached the desired track.
through the compact disc track, push
recorded tracks
in
random
7
and hold the FF or REW button.
sequence. Press RDM again to can-
When you release the button, the
cel or turn the power OFF then ON.
The unit defaults to playing tracks in
8
compact disc player will resume
playing.
sequential order.
9
3 101
Knowing your vehicle
✽ NOTICE
(Continued)
CAUTION
•
To assure proper operation of the
• Do not attempt to grab or pull
•
Do not insert warped or poor
unit, keep the vehicle interior tem-
the compact disc out while the
1
perature within a normal range by
quality discs into the CD play-
disc is being pulled into the
er as damage to the unit may
using the vehicle's air conditioning
audio unit by the self-loading
occur.
or heating system.
2
mechanism. Damage to the
•
When replacing the fuse, replace it
•
Do not insert anything like
audio unit and compact disc
with a fuse having the correct
coins into the player slot as
could occur.
capacity.
damage to the unit may occur.
3
• Avoid using recorded com-
•
All stored bookmarks are all
•
Do not place beverages close
pact discs in your audio unit.
erased when the car battery is dis-
to the audio system. The play-
Original compact discs are
4
connected or power to the vehicle
back mechanism may be dam-
recommended for best
is lost. If this occurs, the book-
aged if you spill them.
results.
marks will have to be reset.
5
•
Do not strike or allow anything
•
This equipment is designed to be
to impact the audio system,
used only in a 12 volt DC battery
damage to the system mecha-
system with negative ground.
6
nisms could occur.
WARNING
•
This unit is made of precision
•
Off-road or rough surface
When driving your vehicle, be
parts. Do not attempt to disassem-
driving may cause the com-
sure to keep the volume of the
7
ble or adjust any parts.
pact disc to skip. Do not use
unit set low enough to allow you
•
Do not expose this equipment
the compact disc when driv-
to hear sounds coming from the
(including the speakers and CD)
8
ing in such conditions as
outside.
to water or excessive moisture.
damage to the compact disc
face could occur.
9
(Continued)
3 102
Knowing your vehicle
STEREO RADIO OPERATION (M445MP3) (IF EQUIPPED)
1
2
1. POWER ON-OFF, VOLUME Control Knob
2. AUDIO Select Button
3
3. BAND Select Button
4. SCAN Button
4
5. EQ Button
5
6. AUTO SEEK Select Button
7. TUNE Select/AUDIO Control knob
6
8. PRESET STATION Select Buttons
7
8
9
LD 455MP3 NA
3 103
Knowing your vehicle
1. POWER ON-OFF Control
After selecting each mode, rotate the
BALANCE Control
Knob
Audio control knob clockwise or
Rotate the knob clockwise to empha-
counterclockwise.
• The radio unit may be operated
size right speaker sound (left speak-
1
BASS Control
er sound will be attenuated).
when the ignition key is in the "ACC"
or "ON" position. Press the button to
To increase the BASS, rotate the
When the control knob is turned
switch the power on. The LCD
knob clockwise, while to decrease
counterclockwise, left speaker sound
2
shows the radio frequency in the
the BASS, rotate the knob counter-
will be emphasized
(right speaker
radio mode or CD/MP3 track in the
clockwise.
sound will be attenuated).
CD/MP3 mode. To switch the power
3
MID-RANGE Control
off, press the button again.
3. BAND Select Button
To increase the MID-RANGE, rotate
• Push the FM/AM, TAPE or CD/MP3
4
the knob clockwise, while to decrease
Pressing the FM/AM button changes
to turn on that function without push-
the MID-RANGE, rotate the knob
the AM, FM1 and FM2 bands. The
ing the Power ON-OFF control knob.
counterclockwise.
mode selected is shown on the dis-
5
VOLUME Control
play.
TREBLE Control
Rotate the knob clockwise to increase
To increase the TREBLE, rotate the
the volume and turn the knob coun-
4. SCAN Button
6
knob clockwise, while to decrease
terclockwise to reduce the volume.
the TREBLE, rotate the knob coun-
When you press the button, frequen-
terclockwise.
cy is changed and the next channel
7
2. AUDIO Select Button
is received automatically.
FADER Control
Pressing the AUDIO button changes
To stay on a station, press the SCAN
Turn the control knob clockwise to
8
the BASS, MID-RANGE, TREBLE,
button again.
emphasize rear speaker sound (front
FADER and BALANCE mode.
speaker sound will be attenuated).
The mode selected is shown on the
When the control knob is turned
5. EQ Button
9
display.
counterclockwise, front speaker
Press the EQ button to select the
sound will be emphasized
(rear
CLASSIC, POPS, ROCK, JAZZ and
speaker sound will be attenuated).
OFF MODE for the desired tone
quality. Each press of the button
changes the display as follows;
3 104
Knowing your vehicle
6. AUTO SEEK Select Button
HOW TO PRESET STATIONS
• When completed, any preset sta-
(Automatic Channel Selection)
tion may be recalled by selecting
Six AM and twelve FM stations may
AM, FM1 or FM2 band and the
Press the AUTO SEEK select button.
be programmed into the memory of
appropriate station button.
When the
side is pressed, the
the radio. Then, by simply pressing
1
unit will automatically tune to the
the AM/FM band select button and/or
next higher frequency and when the
one of the six station select buttons,
CAUTION
2
side is pressed, it will automati-
you may recall any of these stations
•
Do not place beverages close
cally tune to the next lower frequen-
instantly. To program the stations, fol-
to the audio system. The play-
cy.
low these steps:
3
back mechanism may be dam-
aged if you spill them.
CLASSIC➟POPS➟ROCK➟JAZZ➟OFF
•
Press AM/FM selector to set the
•
Do not strike or allow anything
4
band for AM, FM1 and FM2.
to impact the audio system,
•
Select the desired station to be
damage to the system mecha-
stored by seek or manual tuning.
5
7. TUNE Select/Audio Control
nisms could occur.
Knob
•
Determine the preset station select
button you wish to use to access
Rotate the knob clockwise to
6
that station.
increase the frequency and turn the
•
Press and hold the station select
knob counterclockwise to reduce the
button for more than 0.8 seconds. A
7
frequency.
select button indicator will show in
the display indicating which select
8. PRESET STATION Select
button you have depressed. The fre-
8
Buttons
quency display will flash after it has
been stored in to the memory. You
Six stations for AM, FM1 and FM2
9
should then release the button, and
respectively can be preset in the
proceed to program the next
electronic memory circuit.
desired station. A total of 18 stations
can be programmed by selecting
one AM and two FM stations per
button.
3
105
Knowing your vehicle
COMPACT DISC PLAYER (M455MP3) (IF EQUIPPED) - COMPATIBLE WITH MP3/WMA/AAC/WAVE
1
1. AUDIO/MP3 CD or AUX Select Button
2
2. TRACK UP/DOWN Button
3. FF/REW Button
3
4. REPEAT (RPT) Button
5. RANDOM (RDM) Button
4
6. BOOKMARK (MARK) Button
7. SCROLL Button
5
8. EQ Button
9. CD EJECT Button
6
10. CD SCAN Button
11. FILE SEARCH Knob
7
(TUNE Select Knob)
12. DIRECTORY SEARCH (DIR) Button
8
9
LD 455MP3 NA
3 106
Knowing your vehicle
1. AUDIO/MP3 CD or AUX
(Continued)
AUX
3.5mm STEREO MINI PLUG
Select Button
Please refer to the manual of CD-
R/CD-RW recoder or CD-R/CD-
AUDIO/MP3 CD Select
RW software for more informa-
1
•
Insert the CD with the label facing
tion on finalization process.
upward.
• Depending on the recording sta-
•
Insert the CD to start CD playback,
tus, some CD-Rs/CD-RWs may
2
during radio operation.
not be played on this unit.
•
If you press the CD/AUX button
✽ NOTICE
3
✽ NOTICE
while a disc is in the CD deck, the
•
If the AUX device is not connected,
CD player will begin playing even if
Playback of MP3, AAC and WMA
you cannot switch to AUX-IN
the radio or cassette player is
file formats are supported. Load to
4
mode.
being used.
play time for these formats may be
•
When the AUX device is discon-
longer due to the compressed nature
•
The CD/AUX player can be used
nected while in AUX-IN mode, the
5
when the ignition switch is in either
of these discs.
unit automatically switches its
the “ON” or “ACC” position.
mode to last selected mode (CD
AUX-IN Select
•
Push the CD/AUX button to turn on
mode or RADIO mode).
6
• When the AUX device (such as
•
The quality of sound may be defect-
that function without pushing the
portable MP3 players) is connect-
ed or distorted when the unit's EQ
Power ON-OFF control knob.
ed to vehicle's AUX-IN terminal,
(BASS/MID/TREBLE) control and
7
you can switch to AUX-IN mode by
AUX device's EQ control are both
✽ NOTICE
pressing CD/AUX button.
enabled (not flat). When you want
• Do not stick paper or tape etc., on the
8
• With a CD loaded and AUX device
to use the unit's EQ control feature,
label side or the recording side of any
disable the AUX device's EQ con-
connected at the same time, this
discs, as it may cause a malfunction.
button switches between AUX-IN
trol feature, and vice versa.
9
• The unit can play a multi-session
•
When using a portable audio device
mode and CD mode.
CD-R (recordable CD) and CD-
connected to the power outlet, noise
RW (rewritable CD) that consists
may occur during playback. If this
of more than two sessions.
happens, use the power source of
(Continued)
the portable audio device.
3 107
Knowing your vehicle
2. TRACK UP/DOWN Button
• To repeat the music within selected
6. BOOKMARK (MARK) Button
folder, press the RPT button for
• The desired track on the disc cur-
When the CD player unit is operat-
more than 0.8 seconds. To cancel,
rently being played can be select-
ing, the desired track on the disc can
press it again. (MP3 CD only)
1
ed using the track number.
be bookmarked by using the MARK
• If you do not release RPT opera-
• Press
button once to skip for-
button. (MP3 CD only)
tion when the track ends, it will
ward to the beginning of the next
2
automatically be replayed.
track.
•
Press the MARK button for more
This process will be continued until
than 0.8 seconds to bookmark the
Press
within a second after
you push the button again or turn
desired track.
3
playback begins to quickly move
the power OFF then ON.
backward through a CD.
“M” will be displayed on the LCD
and “MEMORY(1~50)” will display
If you press
after more than a
4
5. RANDOM (RDM) Button
for approximately five seconds with
second, it will take you to the
beep sound.
beginning of the file you are now
With random, you can listen to the
5
listening to.
tracks in random, rather than
To play a bookmarked track, press
the MARK button within 0.8 sec-
sequential order.
onds and select the bookmarked
3. FF/REW Button
To use random, do the following:
6
track to play.
If you want to fast forward or reverse
• Press the RDM button to listen to
•
To erase a bookmarked track,
through the compact disc track, push
recorded tracks in random
press the MARK button for more
7
sequence. Press RDM again to
and hold the FF or REW button.
than
0.8 seconds. The unit will
cancel or turn the power OFF then
When you release the button, the com-
beep once when the bookmark is
ON. The unit defaults to playing
8
pact disc player will resume playing.
erased.
tracks in sequential order.
• To listen to the music within the
✽ NOTICE
9
4. REPEAT (RPT) Button
selected folder in random order,
press the RDM button within a sec-
Tracks stored on Mark Memory will
• To repeat the track you are current-
ond. To cancel, press it again or
be automatically erased after you
ly listening to, press the RPT but-
turn the power OFF then ON. (MP3
eject CDs that contain those tracks.
ton. To cancel, press it again.
CD only)
3 108
Knowing your vehicle
7. SCROLL Button
10. CD SCAN Button
12. DIRECTORY SEARCH (DIR)
Button
Press the button, and you can check
• To playback the first 10 seconds of
the file names with more than 16
each track, press the CD SCAN
•
You can move through the folder by
characters on MP3 CD
(max
34
button more than 0.8 seconds.
pushing the DIR button to up (
)
1
characters.).
• To playback the first 10 seconds of
and down(
).
The button doesn’t work on file
each track in the selected folder,
•
After moving the desired folder,
2
names less than 16 characters.
press the CD SCAN button within
press the FILE SEARCH knob to
0.8 seconds. (MP3 CD only)
play back in the selected folder. If
• Press the CD SCAN button again
you do not press the FILE
3
8. EQ Button
within
10 sec. when you have
SEARCH knob within 5 seconds,
Press the EQ button to select the
reached the desired track.
the folder searching function will be
CLASSIC, POPS, ROCK, JAZZ and
4
released. It can not be operated in
OFF MODE for the desired tone
quality. Each press of the button
a single folder.
11. FILE SEARCH Knob
changes the display as follows;
5
(TUNE Select Knob)
CLASSIC➟POPS➟ROCK➟JAZZ➟OFF
• You can skip the track (file) by turn-
ing the FILE SEARCH knob clock-
6
wise or counterclockwise.
9. CD EJECT Button
After selecting the desired track
7
When the
button is pressed with a
(file), press the FILE SEARCH
CD loaded, the CD will eject.
knob to playback the track (file).
Forcing to eject : To force to eject a
If you do not press the FILE
8
CD, press this button for more than 3
SEARCH knob within five seconds,
seconds.
the search will stop.
9
(Do this only when a CD is jammed
and you can not eject it in the normal
way - e.g.) in case that you have
inserted 2 CDs by mistake)
3 109
Knowing your vehicle
✽ NOTICE
(Continued)
CAUTION
•
To assure proper operation of the
• Do not attempt to grab or pull
•
Do not insert warped or poor
unit, keep the vehicle interior tem-
the compact disc out while the
1
perature within a normal range by
quality discs into the CD play-
disc is being pulled into the
er as damage to the unit may
using the vehicle's air conditioning
audio unit by the self-loading
occur.
or heating system.
2
mechanism. Damage to the
•
When replacing the fuse, replace it
•
Do not insert anything like
audio unit and compact disc
with a fuse having the correct
coins into the player slot as
could occur.
capacity.
damage to the unit may occur.
3
• Avoid using recorded com-
•
All stored bookmarks are all
•
Do not place beverages close
pact discs in your audio unit.
erased when the car battery is dis-
to the audio system. The play-
Original compact discs are
4
connected or power to the vehicle
back mechanism may be dam-
recommended for best
is lost. If this occurs, the book-
aged if you spill them.
results.
marks will have to be reset.
5
•
Do not strike or allow anything
•
This equipment is designed to be
to impact the audio system,
used only in a 12 volt DC battery
damage to the system mecha-
system with negative ground.
6
nisms could occur.
WARNING
•
This unit is made of precision
•
Off-road or rough surface
When driving your vehicle, be
parts. Do not attempt to disassem-
driving may cause the com-
sure to keep the volume of the
7
ble or adjust any parts.
pact disc to skip. Do not use
unit set low enough to allow you
•
Do not expose this equipment
the compact disc when driv-
to hear sounds coming from the
(including the speakers and tape)
8
ing in such conditions as
outside.
to water or excessive moisture.
damage to the compact disc
face could occur.
9
(Continued)
3 110
Knowing your vehicle
RADIO AND AUDIO QUALITY/VOLUME CONTROL, EQ (HMP600) (IF EQUIPPED)
1
1,2. Power on /off and volume control button
2
3. Radio selection button
4. Scan Button
3
5. Automatic station selection button (Seek)
4
6. Manual station selection button (Tune)
7. Pre-set button
5
8. LCD Display
9. Bass control/ left, right audio control
6
7
8
9
LD 600 NA
3 111
Knowing your vehicle
1. Power on/off and volume
BSM button
• AM: Move by 9 KHz
control button
Push [BSM] button to start automatic
(531➟540➟549····549➟540➟531)
search from current station. The sta-
When the ignition switch is on ACC
1
or ON, push this button to power on.
tions are memorized in 1~6 pre-set
North America export (Columbian
buttons from smallest station.
Push this button again to power off.
units FM move by 0.1 MHz)
Number 1 pre-set station will be on
2
• FM: Move by 0.2MHz
after the search and memory.
2. Volume control button
(87.5➟87.7➟87.9····87.9➟87.7
Rotate this button clockwise to vol-
➟87.5)
3
5. Automatic station selection
ume up and anti-clockwise to volume
button (Seek)
• AM: Move by 10 KHz
down.
Push [seek
] button, to increase
(530➟540➟550····550➟540➟530)
4
the band and
[seek
] button to
3. Radio selection button
decrease the band. It automatically
7. Pre-set button (1~6)
(FM/AM)
5
finds available station. If the station is
Push these buttons to listen to mem-
Push [FM/AM] button for FM or AM
already memorized in pre-set memo-
orized stations. Push pre-set button
radio. Each press will change
ry, it will show the pre-set number.
6
for more than 1.5 seconds (with a
FM1➟FM2➟AM➟FM1 and repeats.
beep) to memorize current station.
6. Manual station selection
7
4. Scan button
button (Tune)
8. LCD display
Push this button to automatically
Rotate this tune button clockwise 1
select available stations and remains
click to increase band 1 step and
It indicates FM1/FM2/AM along with
8
for
5 seconds from current station.
anti-clockwise to decrease.
current band, pre-set channel, FM
Push again to stay on current station.
stereo with "ST".
9
Regular export
• FM: Move by 0.1MHz
(87.5➟87.6➟87.7····87.7➟87.6
➟87.5)
3 112
Knowing your vehicle
9. Bass control/ left, right
TREBLE
Rotate the volume button
audio control
clockwise to increase
Push this button to select BASS➟
high sound and anti-
MIDDLE➟TREBBLE➟FADER➟
clockwise to decrease
1
high sound.
BALANCE on LCD display screen.
BALANCE
Rotate the volume button
2
BASS
Rotate the volume button
clockwise to enable right
clockwise to increase
speakers and anti-clock-
Bass sound and anti-
wise to enable left speak-
3
clockwise to decrease
ers.
Bass sound.
FADER
Rotate the volume button
4
MIDDLE
Rotate the volume button
clockwise to increase
clockwise to increase
back speaker sound and
middle sound and anti-
anti-clockwise to increa-
5
clockwise to decrease
se front speaker sound.
Middle sound.
6
7
8
9
3 113
Knowing your vehicle
MP3 CDC (HMP600) (IF EQUIPPED)
1.CD loading slot
1
2.CD load button
3.CD eject button
2
4. LCD Display
5.CD/AUX selection button
3
6.CD change button
7,8.Fast Backward and Fast Forward button
4
9.Previous track automatic selection button
5
10. Next track automatic selection button
11.Repeat button
6
12.SCAN button
13.MARK button
7
14.RDM button
15.FILE search knob
8
16.SCROLL button
17.Directory search button
9
LD 600NA
3 114
Knowing your vehicle
1. CD loading slot
4. LCD display
AUX
3.5mm STEREO MINI PLUG
Push [LOAD] button to open CD slot.
It indicates location of CD in CD
Please face printed side upward and
deck. When loading and ejecting CD,
gently push in. This CDC supports
corresponding CD indicator number
1
only 12 cm CDs.
blinks.
2
2. CD load button
5. CD/AUX selection button
✽ NOTICE
Pressing the "LOAD" button opens
CD Select
3
•
If the AUX device is not connect-
an empty tray of lowest order in the
When power is off while CD is loaded
ed, you cannot switch to AUX-IN
CDC deck. When a CD is loaded, the
or radio/AUX is playing, push [CD]
mode.
slot closes and the CD plays. To load
4
button to play CDC. When there is no
•
When the AUX device is discon-
CDs in all empty slots, press the
available CD, "no disc" message will
nected while in AUX-IN mode, the
"LOAD" button for more than 1.5 sec-
be indicated for
2 seconds and
unit automatically switches its
5
onds. Be sure to insert only one CD
returns to previous mode.
mode to last selected mode (CD
into slot at a time. Then, lastly loaded
mode or RADIO mode).
CD is played. If you do not load CDs
•
The quality of sound may be
6
or press any button for 10 seconds
AUX-IN Select
defected or distorted when the
after pressing the "LOAD" button, the
• When the AUX device (such as
unit's EQ (BASS/MID/TREBLE)
LOAD function will be canceled.
portable MP3 players) is connect-
7
control and AUX device's EQ con-
ed to vehicle's AUX-IN terminal,
trol are both enabled (not flat).
you can switch to AUX-IN mode by
3. CD eject button
When you want to use the unit's
8
pressing CD/AUX button.
EQ control feature, disable the
Push button to eject the CD dur-
• With a CD loaded and AUX device
AUX device's EQ control feature,
ing CD playback. Push this button for
connected at the same time, this
and vice versa.
9
more than 1.5 seconds to eject all
button switches between AUX-IN
the CDs. If CD number 3 is currently
mode and CD mode.
playing, ejecting order is 3,4,5,6,1,2.
3 115
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст