KIA Magentis (2010 year). Instruction — part 4

Safety features of your vehicle
Although the front air bags (driver’s and
front passenger’s air bags) are designed
to inflate only in frontal collisions, they
also may inflate in other types of colli-
sions if the front impact sensors detect a
sufficient impact. Side impact and curtain
air bags are designed to inflate only in
side impact collisions, but they may
inflate in other collisions if the side
impact sensors detect a sufficient
1JBA3516
impact.
If the vehicle chassis is impacted by
bumps or objects on unimproved roads,
1JBA3515
the air bags may deploy. Drive carefully
C040802AEN
on unimproved roads or on surfaces not
Air bag non-inflation conditions
designed for vehicle traffic to prevent
• In certain low-speed collisions the air
unintended air bag deployment.
bags may not deploy. The air bags are
designed not to deploy in such cases
because they may not provide benefits
beyond the protection of the seat belts
OUN026090
in such collisions.
Side impact and curtain air bags
Side impact and curtain air bags are
designed to inflate when an impact is
detected by side collision sensors
depending on the strength, speed or
angles of impact resulting from a side
impact collision.
3 47
Safety features of your vehicle
OED036100
1JBA3516
1JBA3521
• Frontal air bags are not designed to
• Front air bags may not inflate in side
• In an angled collision, the force of
inflate in rear collisions, because occu-
impact collisions, because occupants
impact may direct the occupants in a
pants are moved backward by the
move to the direction of the collision,
direction where the air bags would not
force of the impact. In this case, inflat-
and thus in side impacts, frontal air bag
be able to provide any additional bene-
ed air bags would not be able to pro-
deployment would not provide addi-
fit, and thus the sensors may not
vide any additional benefit.
tional occupant protection.
deploy any air bags.
However, side impact and curtain air
bags may inflate depending on the
intensity, vehicle speed and angles of
impact.
3 48
Safety features of your vehicle
1JBA3517
1JBA3522
1JBA3518
• Just before impact, drivers often brake
• Air bags may not inflate in rollover acci-
• Air bags may not inflate if the vehicle
heavily. Such heavy braking lowers the
dents because air bag deployment
collides with objects such as utility
front portion of the vehicle causing it to
would not provide protection to the
poles or trees, where the point of
“ride” under a vehicle with a higher
occupants.
impact is concentrated to one area and
ground clearance. Air bags may not
However, side impact and curtain air
the full force of the impact is not deliv-
inflate in this "under-ride" situation
bags may inflate when the vehicle is
ered to the sensors.
because deceleration forces that are
rolled over by a side impact collision, if
detected by sensors may be signifi-
the vehicle is equipped with side
cantly reduced by such “under-ride”
impact air bags and curtain air bags.
collisions.
3 49
Safety features of your vehicle
C041100AHM
(Continued)
SRS Care
WARNING
If the air bags inflate, they must
The SRS is virtually maintenance-free
Modification to SRS components
be replaced by an authorized KIA
and so there are no parts you can safely
or wiring, including the addition
dealer.
service by yourself. If the SRS air bag
of any kind of badges to the pad
Do not tamper with or disconnect
warning light " " does not illuminate,
covers or modifications to the
SRS wiring, or other components
when you turn the ignition on, or continu-
body structure, can adversely
affect SRS performance and lead
of the SRS system. Doing so
ously remains on, have your vehicle
to possible injury.
could result in injury, due to acci-
immediately inspected by an authorized
dental inflation of the air bags or
KIA dealer.
For cleaning the air bag pad cov-
by rendering the SRS inopera-
ers, use only a soft, dry cloth or
one which has been moistened
tive.
Any work on the SRS system, such as
with plain water. Solvents or
If components of the air bag sys-
removing, installing, repairing, or any
cleaners could adversely affect
tem must be discarded, or if the
work on the steering wheel must be per-
the air bag covers and proper
vehicle must be scrapped, certain
formed by an authorized KIA dealer.
deployment of the system.
safety precautions must be
Improper handling of the SRS system
No objects should be placed over
observed. An authorized KIA
may result in serious personal injury.
or near the air bag modules on the
dealer knows these precautions
steering wheel, instrument panel,
and can give you the necessary
and the front passenger's panel
information. Failure to follow
above the glove box, because any
these precautions and proce-
such object could cause harm if the
dures could increase the risk of
vehicle is in a crash severe enough
personal injury.
to cause the air bags to inflate.
If your car was flooded and has
(Continued)
soaked carpeting or water on the
flooring, you shouldn't try to start
the engine; have the car towed to
an authorized KIA dealer.
3 50
Safety features of your vehicle
C041300AMG
Keep occupants away from the air
Additional safety precautions
bag covers. All occupants should sit
WARNING
Air bags are activated (able to inflate if
upright, fully back in their seats with
• Sitting improperly or out of posi-
necessary) only when the ignition
their seat belts on and their feet on the
tion can cause occupants to be
switch is turned to the ON or START
floor. If occupants are too close to the
shifted too close to a deploying
position.
air bag covers, they could be injured if
air bag, strike the interior struc-
Passengers should not move out of
the air bags inflate.
ture or be thrown from the vehicle
or change seats while the vehicle is
Do not attach or place objects on or
resulting in serious injury or
moving. A passenger who is not wear-
near the air bag covers. Any object
death.
ing a seat belt during a crash or emer-
attached to or placed on the front or
• Always sit upright with the seat-
gency stop can be thrown against the
side air bag covers could interfere with
back in an upright position, cen-
inside of the vehicle, against other
the proper operation of the air bags.
tered on the seat cushion with
occupants, or out of the vehicle.
Do not modify the front seats.
your seat belt on, legs comfort-
Each seat belt is designed to
Modification of the front seats could
ably extended and your feet on
restrain one occupant. If more than
interfere with the operation of the sup-
the floor.
one person uses the same seat belt,
plemental restraint system sensing
they could be seriously injured or killed
components or side air bags.
in a collision.
Do not place items under the front
C041400AUN
Do not use any accessories on seat
seats. Placing items under the front
Adding equipment to or modifying
belts. Devices claiming to improve
seats could interfere with the operation
your air bag-equipped vehicle
occupant comfort or reposition the seat
of the supplemental restraint system
If you modify your vehicle by changing
belt can reduce the protection provided
sensing components and wiring har-
your vehicle's frame, bumper system,
by the seat belt and increase the
nesses.
front end or side sheet metal or ride
chance of serious injury in a crash.
Never hold an infant or child on your
height, this may affect the operation of
Passengers should not place hard
lap. The infant or child could be seri-
your vehicle's air bag system.
or sharp objects between them-
ously injured or killed in the event of a
selves and the air bags. Carrying
crash. All infants and children should
hard or sharp objects on your lap or in
be properly restrained in appropriate
your mouth can result in injuries if an
child safety seats or seat belts in the
air bag inflates.
rear seat.
3 51
Safety features of your vehicle
C041200AUN-EC
Air bag warning label
Air bag warning labels, some required
by the Canadian Motor Vehicle Safety
Standard (CMVSS), are attached to alert
the driver and passengers of potential
risks of the air bag system.
1
2
(if equipped)
7JBN3519/1MGA3055/OMG035103
3 52
Keys / 4-3
Smart key / 4-7
Remote keyless entry / 4-11
Theft-alarm system / 4-14
Door locks / 4-16
Trunk / 4-20
Windows / 4-22
Features of your vehicle
4
Hood / 4-27
Fuel filler lid / 4-28
Sunroof / 4-31
Steering wheel / 4-34
Mirrors / 4-36
Instrument cluster / 4-46
Hazard warning flasher / 4-61
Lighting / 4-62
Wipers and washers / 4-66
Interior light / 4-69
Defroster / 4-71
Manual climate control system / 4-73
Automatic climate control system / 4-82
Windshield defrosting and defogging / 4-89
Storage compartments / 4-92
Interior features / 4-94
Audio system / 4-99
4
Features of your vehicle
Features of your vehicle
KEYS
Type A
To reinstall the mechanical key, put the
key into the hole and push it until a click
sound is heard.
WARNING - Ignition key
Leaving children unattended in a
vehicle with the ignition key is dan-
gerous even if the key is not in the
ignition. Children copy adults and
they could place the key in the igni-
OFD047002-A
tion. The ignition key would enable
Type B
OFD047001
children to operate power windows
or other controls, or even make the
D010100AUN
vehicle move, which could result in
Record your key number
serious bodily injury or even death.
The key code number is stamped on the
Never leave the keys in your vehicle
bar code tag attached to the key set.
with unsupervised children.
Should you lose your keys, this number
will enable an authorized KIA dealer to
duplicate the keys easily. Remove the bar
code tag and store it in a safe place. Also,
WARNING
record the code number and keep it in a
Use only KIA original parts for the
OMG040002
safe place (not in the vehicle).
ignition key in your vehicle. If an
D010200AUN
aftermarket key is used, the ignition
Key operations
switch may not return to ON after
Used to start the engine, lock and unlock
START. If this happens, the starter
the doors, lock and unlock the glove box,
will continue to operate causing
and open the trunk.
damage to the starter motor and
possible fire due to excessive cur-
Type B
rent in the wiring.
To remove the mechanical key, press and
hold the release button and remove the
mechanical key.
4
3
Features of your vehicle
To deactivate the immobilizer sys-
tem:
WARNING
Insert the ignition key into the key cylin-
In order to prevent theft of your
der and turn it to the ON position.
vehicle, do not leave spare keys
anywhere in your vehicle. Your
To activate the immobilizer system:
Immobilizer password is a cus-
Turn the ignition key to the OFF position.
tomer unique password and should
The immobilizer system activates auto-
be kept confidential. Do not leave
matically. Without a valid ignition key for
this number anywhere in your vehi-
cle.
your vehicle, the engine will not start.
OFD047001-B
NOTICE
D010300CMG-EC
When starting the engine, do not use the
key with other immobilizer keys around.
Immobilizer system (if equipped)
Otherwise the engine may not start or
Your vehicle is equipped with an elec-
may stop soon after it starts. Keep each
tronic engine immobilizer system to
key separate in order to avoid a starting
reduce the risk of unauthorized vehicle
malfunction.
use.
Your immobilizer system is comprised of
a small transponder in the ignition key
and electronic devices inside the vehicle.
With the immobilizer system, whenever
you insert your ignition key into the igni-
tion switch and turn it to ON, it checks
and determines and verifies that the igni-
tion key is valid.
If the key is determined to be valid, the
engine will start.
If the key is determined to be invalid, the
engine will not start.
4 4
Features of your vehicle
This device complies with Industry
CAUTION
CAUTION
Canada Standard RSS-210.
Do not put metal accessories near
Do not change, alter or adjust the
Operation is subject to the following two
the ignition switch.
immobilizer system because it
conditions:
The engine may not start because
could cause the immobilizer sys-
1. This device may not cause harmful
the metal accessories may interrupt
tem to malfunction and should only
interference, and
the transponder signal from trans-
be serviced by an authorized KIA
2. This device must accept any interfer-
mitting normally.
dealer.
ence received, including interference
Malfunctions caused by improper
that may cause undesired operation.
alterations, adjustments or modifi-
NOTICE
cations to the immobilizer system
are not covered by your vehicle
WARNING
If you need additional keys or lose your
manufacturer warranty.
Changes or modifications not
keys, consult an authorized KIA dealer.
expressly approved by the party
responsible for compliance could
CAUTION
void the user’s authority to operate
the equipment. If the keyless entry
The transponder in your ignition
system is inoperative due to
key is an important part of the
changes or modifications not
immobilizer system. It is designed
expressly approved by the party
to give years of trouble-free service,
responsible for compliance, it will
however you should avoid expo-
not be covered by your manufactur-
sure to moisture, static electricity
er’s vehicle warranty.
and rough handling. Immobilizer
system malfunction could occur.
4 5
Features of your vehicle
D010301AMG-EC
3. You may set the remaining number of
"Limp Home" Mode and Related
digits by following steps 1 and 2.
CAUTION
Procedures
4. If all of the four password digits have
If the password is entered incor-
If the immobilizer warning indicator blinks
been successfully entered, turn the
rectly three consecutive times,
for five seconds when the ignition key is
ignition key "ON" and check that the
wait for about one hour to per-
turned to the "ON" position, this indicates
immobilizer indicator illuminates. From
form the limp home activation
the immobilizer system requires service.
this time, you have to start your engine
procedure again.
The engine cannot be started without
within 30 seconds. If you try to start
If you cannot start your engine
using the procedure below.
your engine after
30 seconds, your
using the limp home activation
The following procedure describes how
engine will not start.
procedure, have your vehicle
to start the engine using the limp home
towed by an authorized KIA deal-
function (0, 1, 2, 3 as a sample pass-
NOTICE
er.
word).
If the engine stalls while driving in the
"limp home" mode, you can start your
NOTICE
engine within
3 seconds without re-
You can get a limp home password when
entering the password.
the vehicle is first delivered to you. If
you do not have a password, consult
If the immobilizer indicator blinks for five
your authorized KIA dealer.
seconds, you must re-enter the password
(steps 1~4).
1. To activate the password, turn the igni-
tion key "ON" and "OFF" according to
After performing the limp home activation
the digit numbers. The immobilizer indi-
procedure, consult with your authorized
cator will blink along with the operation
KIA dealer as soon as possible.
of the ignition key. For example, turn
the ignition key once for digit number
"1", and twice for "2", and so on. For
the digit number "0", you must cycle
the ignition key 10 times.
2. Wait for 3~10 seconds.
4 6
Features of your vehicle
SMART KEY (IF EQUIPPED)
Even though you press the outside door
handle buttons, the doors will not lock
and the chime will sound for 3 seconds if
any of following occur:
• The smart key is in the vehicle.
• The ENGINE START/STOP button is in
ACC or ON position.
• Any door except the trunk is open.
D040102ABH
Unlocking
OMG040001
OMG049005
Press the button in the front outside door
handles with all doors (and trunk) closed
D040000ABH
D040101ABH
and locked, unlocks the driver’s door. The
With a smart key, you can lock or unlock
Locking
hazard warning lights blink twice to indi-
a door (and trunk) and even start the
Pressing the button in the front outside
cate that the driver’s door is unlocked. All
engine without inserting the key.
door handles with all doors (and trunk)
doors (and trunk) are unlocked if the but-
The functions of buttons on a smart key
closed and any door unlocked, locks all
ton is pressed once more within 4 sec-
are similar to the remote keyless entry.
the doors (and trunk). The hazard warn-
onds. The hazard warning lights will blink
(Refer to the “Remote keyless entry” in
ing lights blink once to indicate that all
twice to indicate that all the doors (and
this section.)
doors (and trunk) are locked. The button
trunk) are unlocked.
will only operate when the smart key is
The button will only operate when the
within 0.7~1 m (28~40 in.) from the out-
D040100ABH
smart key is within 0.7~1 m (28~40 in.)
side door handle. If you want to make
from the outside door handle.
Smart key functions
sure that a door has locked or not, you
When the smart key is recognized in the
With the smart key, you can lock and
should check the door lock button inside
area of 0.7~1 m (28~40 in.) from the front
unlock the vehicle doors (and trunk), and
the vehicle or pull the outside door han-
outside door handle, other people can
the smart key enables starting of the
dle.
also open the door without possession of
engine as well. Detailed information fol-
the smart key.
lows:
4 7
Features of your vehicle
D040103ABH
D040300AMG
Trunk unlocking (if equipped)
Smart key precautions
CAUTION
When all doors are locked, if you are
Keep the smart key away from
NOTICE
within 0.7~1 m (28~40 in.) from the out-
water or any liquid. If the keyless
If, for some reason, you happen to lose
side trunk handle with your smart key in
entry system is inoperative due to
your smart key, you will not be able to
your possession, the trunk will unlock
exposure to water or liquids, it will
start the engine. Tow the vehicle, if
and open when you press the trunk han-
not be covered by your manufactur-
necessary, and contact an authorized
dle switch.
er’s vehicle warranty.
KIA dealer.
The hazard warning lights will blink twice
A maximum of 2 smart keys can be
to indicate that the trunk is unlocked.
registered to a single vehicle. If you
This device complies with Industry
Also, once the trunk is opened and then
lose a smart key, you should immedi-
Canada Standard RSS-210.
closed, the trunk will be locked automati-
ately take the vehicle and key to your
Operation is subject to the following two
cally.
authorized KIA dealer to protect it
conditions:
from potential theft.
1. This device may not cause harmful
D040104AEN
The smart key will not work if any of
interference, and
following occur:
Start-up
2. This device must accept any interfer-
- The smart key is close to a radio
You can start the engine without inserting
ence received, including interference
transmitter such as a radio station or
the key. For detailed information refer to
that may cause undesired operation.
an airport which can interfere with
the “Engine start/stop button” in section
normal operation of the smart key.
5.
- You keep the smart key near a
WARNING
mobile two-way radio system or a
Changes or modifications not
cellular phone.
expressly approved by the party
- Another vehicle’s smart key is being
responsible for compliance could
operated close to your vehicle.
void the user’s authority to operate
When the smart key does not work
the equipment. If the keyless entry
correctly, open and close the door with
system is inoperative due to
the mechanical key. If you have a
changes or modifications not
problem with the smart key, contact
expressly approved by the party
an authorized KIA dealer.
responsible for compliance, it will
not be covered by your manufactur-
er’s vehicle warranty.
4 8
Features of your vehicle
Trunk locking
To activate the trunk lock system so that
the trunk can only be opened with the
mechanical key, perform the following:
1. Depress and hold the release button
(1) and remove the mechanical key (2).
2. Open the trunk.
3. Set the trunk lid lock knob to LOCK
position.
4. Close the trunk.
OMG040002
OMG040003
When leaving your keys with a parking lot
attendant or valet, perform steps 1 to 4
above, remove the mechanical key from
the smart key and leave the smart key
with the attendant. In this manner the
smart key can only be used to start the
engine and operate door locks.
Lock release
To release the trunk lock feature, open
OMG049003
the trunk with the mechanical key and set
OBH048004
the trunk lid lock knob to UNLOCK posi-
D040600AMG
D040500BMG
tion. In this position the trunk will open
Trunk lock system
Battery replacement
with the trunk lid release lever or smart
The trunk lid lock knob located in the
A smart key battery should last for sever-
key.
trunk is used to prevent unauthorized
al years, but if the smart key is not work-
access to the trunk.
ing properly, try replacing the battery with
a new one. If you are unsure how to use
your smart key or replace the battery,
contact an authorized KIA dealer.
4 9
Features of your vehicle
NOTICE
CAUTION
The circuit inside the smart key can
An inappropriately disposed bat-
have a problem if exposed to moisture
tery can be harmful to the environ-
or static electricity. If you are unsure
ment and human health.
how to use your smart key or replace the
Dispose the battery according to
battery, contact an authorized KIA deal-
your local law(s) or regulation.
er.
1. Pry open the rear cover of the smart
key.
2. Replace the battery with a new battery
(CR2032). When replacing the battery,
OMG040002
make sure the battery positive “+” sym-
Door lock/unlock in an emer-
bol faces up as indicated in the illus-
tration.
gency situation
3. Install the battery in the reverse order
If the smart key does not operate nor-
of removal.
mally, you can lock or unlock the doors by
using the mechanical key.
1. Depress and hold the release button
NOTICE
(1) and remove the mechanical key (2).
• Using the wrong battery can cause the
2. Turn the key toward the rear of the
smart key to malfunction. Be sure to
vehicle to unlock and toward the front
use the correct battery.
of the vehicle to lock.
• Circuits inside the smart key may
develop problems when dropped,
exposed to moisture or static elec-
tricity.
• If you suspect that your smart key
might have sustained some damage,
or you feel your smart key is not
working correctly, contact an author-
ized KIA dealer.
4
10
Features of your vehicle
REMOTE KEYLESS ENTRY
Type A
Type A
D020102ABH-EU
The hazard warning lights blink if the lock
Unlock (2)
button is pressed once.
The driver's door is unlocked if the unlock
The hazard warning lights blink and the
button is pressed once. The hazard
chime sounds once if the lock button is
warning lights will blink twice to indicate
pressed once more within 4 seconds to
that the driver's door is unlocked.
indicate that all doors
(and trunk) are
All doors (and trunk) are unlocked if the
locked.
unlock button is pressed once more with-
in 4 seconds. The hazard warning lights
Type B
will blink and the chime will sound twice
The hazard warning lights blink and the
again to indicate that all doors
(and
chime sounds once to indicate that all
trunk) are unlocked.
ONF048011L/OMG038004
doors (and trunk) are locked.
After depressing this button, the doors
Type B
(and trunk) will be locked automatically
unless you open any door within 30 sec-
However, if any door (or trunk) remains
onds.
open, the hazard warning lights and the
chime will not operate. If all doors (and
trunk) are closed after the lock button is
D020104BMG-EU
pressed, the hazard warning lights blink.
Trunk unlock (3)
The trunk is unlocked if the button is
pressed for more than 1 second when all
doors are locked.
OMG040001
D020105AMG
Remote keyless entry system
Alarm (4)
operations
The horn sounds and hazard warning
D020101ABH-EU
lights flash for about 30 seconds if this
Lock (1)
button is pressed for more than 0.5 sec-
onds. To stop the horn and lights, press
All doors (and trunk) are locked if the lock
any button on the transmitter.
button is pressed.
4 11

Была ли эта страница вам полезна?
Да!Нет
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности