KIA Sedona (2019 year). Instruction — part 12

Features of your vehicle

84

4

Instrument Cluster Control

Adjusting Instrument Cluster
Illumination

The brightness of the instrument
panel illumination is changed by
pressing the illumination control button
(“+” or “-”) when the ignition switch or
Engine Start/Stop button is ON, or the
tale lights are turned on.

• If you hold the illumination control

button (“+” or “-”), the brightness will
be changed continuously.

• If the brightness reaches to the

maximum or minimum level, an
alarm will sound.

LCD Display Control

The LCD display modes can be
changed by using the control buttons
on the steering wheel.

OYP044059K

OYP048381N

OYP048060N

4 85

Features of your vehicle

(1)

: MODE button for changing

modes

(2)

▲ / ▼ / OK : SELECT

scroll

switch for setting the
selected item and
RESET scroll switch
for resetting items

(3)

: RETURN button for move

the previous mode or item (if
equipped)

❈ For the LCD modes, refer to “LCD

Display” in this chapter.

Gauges

Speedometer

The speedometer indicates the
speed of the vehicle and is calibrated
in miles per hour (mph) and/or kilo-
meters per hour (km/h).

Tachometer

The tachometer indicates the
approximate number of engine revo-
lutions per minute (rpm).
Use the tachometer to select the cor-
rect shift points and to prevent lug-
ging and/or over-revving the engine.

OYP046102N

OYP044103N

Features of your vehicle

86

4

Engine Coolant Temperature
Gauge

This gauge indicates the tempera-
ture of the engine coolant when the
ignition switch or Engine Start/Stop
button is ON.

If the gauge pointer moves beyond
the normal range area toward the “H”
position, it indicates overheating that
may damage the engine.
Do not continue driving with an over-
heated engine. If your vehicle over-
heats, refer to “If the Engine
Overheats” in chapter 6.

CAUTION -

Red zone

Do not operate the engine with-
in the tachometer's RED ZONE.
This may cause severe engine
damage.

OYP048105N

■ Type A

■ Type B

WARNING -

Hot radiator

Never remove the radiator cap
when the engine is hot. The
engine coolant is under pressure
and could severely burn. Wait
until the engine is cool before
adding coolant to the reservoir.

4 87

Features of your vehicle

Fuel Gauge

This gauge indicates the approxi-
mate amount of fuel remaining in the
fuel tank.

✽

✽

NOTICE

• The fuel tank capacity is given in

chapter 8.

• The fuel gauge is supplemented by

a low fuel warning light, which
will illuminate when the fuel tank
is nearly empty.

• On inclines or curves, the fuel

gauge pointer may fluctuate or the
low fuel warning light may come
on earlier than usual due to the
movement of fuel in the tank.

✽

✽

NOTICE

Fuel display may not be accurate if
you are filling in sloping places.

OYP048106N

■ Type A

■ Type B

WARNING -

Fuel gauge

Stop and obtain additional fuel
as soon as possible after the
warning light comes on or when
the gauge indicator comes
close to the E level. Running out
of fuel can expose vehicle occu-
pants to danger.

CAUTION

- Low fuel

Avoid driving with an extremely
low fuel level. Running out of
fuel could cause the engine to
misfire damaging the catalytic
converter.

Features of your vehicle

88

4

Odometer

The odometer Indicates the total dis-
tance that the vehicle has been driv-
en and should be used to determine
when periodic maintenance should
be performed.
- Odometer range : 0 ~ 999999 miles

or 0 ~ 159999 kilometers.

Outside Temperature Gauge

This gauge indicates the current out-
side air temperatures by 1°F (1°C).
- Temperature range : -40°F ~ 211°F

(-40°C ~ 85°C)

The outside temperature on the dis-
play may not change immediately
like a general thermometer to pre-
vent the driver from being inattentive.
To change the temperature unit (from
°C to °F or from °F to °C) can be
changed by using the “User Settings”
mode of the LCD display.

❈ For more details, refer to “LCD

Display” in this chapter.

OYP048384N

OYP048383N

■

Type A

■

Type B

OYP048386N

OYP048385N

■

Type A

■

Type B

4 89

Features of your vehicle

Transaxle Shift Indicator

Automatic Transaxle Shift Indicator

This indicator displays which auto-
matic transaxle shift lever is selected.

• Park : P
• Reverse : R
• Neutral : N
• Drive : D
• Sports Mode : 1, 2, 3, 4, 5, 6, 7, 8

OYP048388N

OYP048387N

■

Type A

■

Type B

Features of your vehicle

90

4

LCD Modes

LCD DISPLAY

❈ For controlling the LCD modes, refer to “LCD Display Control” in this chapter.

Modes

Symbol

Explanation

Trip Computer

This mode displays driving information like the tripmeter, fuel economy, and so on.
❈ For more details, refer to “Trip Computer” in this chapter

Turn by Turn mode

(if equipped)

This mode displays the state of the navigation.

Assist mode

(if equipped)

This mode displays the state of below systems.
- SCC with S&G(Refer to “Smart Cruise Control with Stop & Go System” in chapter 5)

- Lane Departure Warning (Refer to “Lane Departure Warning system” in chapter 5)

- Tire Pressure Monitoring System (TPMS, Refer to “Tire Pressure Monitoring System”

in chapter 6)

User Settings

On this mode, you can change settings of the doors, lamps and etc.

Master warning

mode

This mode informs of warning messages related to Low tire pressure or malfunction of
Blind-spot Collision Warning and etc.

4 91

Features of your vehicle

The trip computer is a microcomput-
er-controlled driver information sys-
tem that displays information related
to driving.

✽

✽

NOTICE

Some driving information stored in
the trip computer (for example
Average Vehicle Speed) resets if the
battery is disconnected.

Trip Modes

Fuel Economy

Average Fuel Economy (1)
• The average fuel economy is cal-

culated by the total driving dis-
tance and fuel consumption since
the last average fuel economy
reset.
- Fuel economy range: 0.0 ~ 99.9

MPG or km/L, L/100km

• The average fuel economy can be

reset both manually and automati-
cally.

TRIP MODES (TRIP COMPUTER)

To change the trip mode, scroll the
MOVE scroll switch (

▲/▼) in the trip

computer mode.

OYP048397N

* : if equipped

• Tripmeter
• Fuel Economy
• Timer

Accumulated Info

• Tripmeter
• Fuel Economy
• Timer

Digital speedometer

Drive Info

• Average Fuel Economy
• Instant Fuel Economy

Fuel Economy

Smart shift*

Features of your vehicle

92

4

Manual reset

To reset average fuel economy man-
ually, press the OK button (reset) on
the steering wheel for more than 1
second when the average fuel econ-
omy is displayed.

Automatic reset

To make the average fuel economy
be reset automatically whenever
refueling, select the “Auto Reset”
mode in User Setting menu of the
LCD display (Refer to “LCD
Display”).

• OFF - You may set to default man-

ually by using the trip switch reset
button.

• When driving - The vehicle will

automatically set to default once 4
hours pass after the Engine
Start/Stop Button or ignition switch
is in the ACC or OFF position.

• When refueling - After refueling

more than 1.6 gallons (6 liters) and
driving over 1 mph (1 km/h), the
vehicle will reset to default auto-
matically.

✽

✽

NOTICE

The average fuel economy is not dis-
played for more accurate calculation
if the vehicle does not drive more
than 0.2 miles (300 meters) since the
ignition switch or Engine Start/Stop
button is turned to ON.

Instant Fuel Economy (2)
• This mode displays the instant fuel

economy during the last few sec-
onds when the vehicle speed is
more than 5 mph (8 km/h).
- Fuel economy range: 0 ~ 50 MPG

or 0 ~ 30 km/L, L/100km

4 93

Features of your vehicle

Accumulated driving informa-
tion mode

Displays accumulated information
starting from mileage/fuel efficien-
cy/time default point.
• Accumulated information is calcu-

lated after the vehicle has run for
more than 0.2 mi. (300 meters).

• If you press “OK” button for more

than 1 second after the Cumulative
Information is displayed, the infor-
mation will be reset.

• If the engine is running, even when

the vehicle is not in motion, the
information will be accumulated.

One time driving information
mode

The vehicle will display Driving
Information once per one ignition
cycle.
- Fuel efficiency is calculated after

the vehicle has run for more than
0.2 mi. (300 meters).

- The Driving Information will be

reset 4 hours after ignition has
been turned off. So, when the vehi-
cle ignition is turned on within 4
hours, the information will not be
reset.

- If you press “OK” button for more

than 1 second after the Driving
Information is displayed, the infor-
mation will be reset.

- If the engine is running, even when

the vehicle is not in motion, the
information will be accumulated.

OYP048399N

OYP048398N

Features of your vehicle

94

4

Digital speedometer

This mode displays the current
speed of the vehicle.

Smart Shift (if equipped)

This mode displays the currently
selected drive mode.

Turn By Turn Mode (if equipped)

This mode displays the state of the
navigation.

OUMA048530

OYP048400N

OUMA048531

4 95

Features of your vehicle

Assist mode (if equipped)

Assist mode displays the state of
below systems.
- Smart Cruise Control with Stop &

Go (if equipped)

- Lane Departure Warning (Refer to

“Lane Departure Warning system”
in chapter 5)

- Tire Pressure Monitoring

System(TPMS, Refer to “Tire
Pressure Monitoring System” in
chapter 6)

Service mode

When Service Required is set, the
remaining distance/period to drive
appears on the LCD screen.

OYP048401N

OYP048402N

■ SCC with S&G

■ LDW

OYP048403N

■ TPMS

OYP048391N

OYP048394N

■

Type A

■

Type B

Features of your vehicle

96

4

From the point at which the remain-
ing distance to drive amounts to 900
mi. (1,500 km) or the remaining peri-
od amounts to 3 days, Service
Required message automatically
displays and remained on LCD
screen for a number of seconds
every time the engine start/stop but-
ton is ON.
With Service Required in place,
Service Required Alarm message
pops up when an aggregated
amount of miles/time driven reaches
a certain point.
With Service Required mode, press
OK button for more than 1 second.
The values will return to initial setting
values.

❈See User Settings

Mode in this chapter for further
information about Service Required
Setting.

❈Service Required Setting

Battery Cable Disconnection, Fuse
Switch OFF, or Service Required
Setting values (an amount of
miles/time driven) can be randomly
changed. In such cases, re-enter
Service Required Setting values.

Master Warning Mode

• This warning light informs the driv-

er of the following situations
- Forward Collision-Avoidance

(if equipped) blockage

- Forward Collision-Avoidance

(if equipped) malfunction

- Blind-Spot Collision Warning

(if equipped) malfunction

- Blind-Spot Collision Warning

(if equipped) blockage

- LED headlamp (if equipped) mal-

function

- High Beam Assist (if equipped)

malfunction

- Low engine oil
- Smart Cruise Control with Stop

&Go (if equipped) blockage

- Smart Cruise Control with Stop &

Go (if equipped) malfunction

4 97

Features of your vehicle

The Master Warning Light illumi-
nates when more than one of the
above warning situations occur.
If the warning situation is solved, the
master warning light will be turned
off.

Distance to empty

• The distance to empty is the esti-

mated distance the vehicle can be
driven with the remaining fuel.
- Distance range : 1 ~ 9,999 mi. (1

~ 9,999 km)

• If the estimated distance is below 1

mi. (1 km), the trip computer will
display “---” as distance to empty.

✽

✽

NOTICE

• If the vehicle is not on level ground

or the battery power has been
interrupted, the distance to empty
function may not operate correct-
ly.

• The distance to empty may differ

from the actual driving distance as
it is an estimate of the available
driving distance.

• The trip computer may not regis-

ter additional fuel if less than 1.6
gallons (6 liters) of fuel are added
to the vehicle.

• The fuel economy and distance to

empty may vary significantly
based on driving conditions, driv-
ing habits, and condition of the
vehicle.

OYP048390N

Features of your vehicle

98

4

User Settings Mode

Description

In this mode, you can change setting
of the doors, lights, and so on.

Shift to P to edit settings

This warning message appears if
you try to adjust the User Settings
while driving.

For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and mov-
ing the shift lever to P (Park).

Driver Assistance (if equipped)

• Smart Cruise Control with Stop &

Go Reaction (if equipped) :
-

Choose the sensitivity
(Slow/Normal/Fast) of the smart
cruise control.

❈For more details, refer to “Smart

Cruise Control with Stop & Go” in
chapter 5.

• Forward Collision-Avoidance

Assist (FCA, if equipped) :
- To activate or deactivate the FCA

system.

❈For more details, refer to “Forward

Collision-Avoidance Assist(FCA)”
in chapter 5.

• Forward Collision Warning (FCW, if

equipped)
- Choose the sensitivity of the for-

ward collision warning.
(Late/Normal/Early)

❈For more details, refer to “Forward

Collision Avoidance Assist(FCA)”
in chapter 5.

OYP048406N

OYP048392N

4 99

Features of your vehicle

• Driver Attention Warning (DAW, if

equipped)

❈For more details, refer to ‘Driver

Attention Warning (DAW)” in chap-
ter 5.

• Blind Spot Collision Warning

Timing (if equipped)
-

Choose the sensitivity
(Late/Normal/Fast) of the Blind
Spot Collision Warning Timing
control.

❈For more details, refer to “Blind spot

Collision Warning” in chapter 5.

• Blind Spot Collision Warning

Sound (if equipped)
- If this item is checked, the blind

spot collision warning sound
function will be activated.

❈For more details, refer to “Blind spot

Collision Warning” in chapter 5.

• Rear Cross Traffic Collision

Warning (if equipped)
- If this item is checked, the rea

cross traffic collision warning will
be activated.

❈For more details, refer to “Blind-spot

Collision Warning” in chapter 5.

Door/Liftgate

• Automatically Unlock :

- Disable : The auto door unlock

operation will be canceled.

- Vehicle Off : All doors will be

automatically unlocked when the
Engine Star/Stop Button or igni-
tion switch is set to the OFF posi-
tion.

- On Shift to P : All doors will be

automatically unlocked if the
automatic transmission shift lever
is shifted to the P (Park) position.

• Two Press Unlock (if equipped)

- If this item checked, the two press

unlock function will be activated.
(Only the driver’s door will unlock
when unlock button is pressed
once and all doors will unlock
when the same button is pressed
again within 4 seconds.)