KIA Soul (2019 year). Instruction — part 23

6 75

Driving your vehicle

To turn cruise control off:

Press the CRUISE button. (the
CRUISE indicator in the instrument
cluster will go off).

Vehicle to vehicle distance
setting (SCC)

To set vehicle to vehicle distance:

This function allows you to program
the vehicle to maintain relative dis-
tance to the vehicle ahead without
depressing the accelerator pedal or
brake pedal.

The vehicle to vehicle distance will
automatically activate when the SCC
is on.
Select the appropriate distance
according to road conditions and
vehicle speed.

Each time the button is pressed, the
vehicle to vehicle distance changes
as follows:

OPS053017

OPS056121N

Distance 4

Distance 3

Distance 2

Distance 1

Driving your vehicle

76

6

For example, if you drive at 56 mph
(90 km/h), the distance is maintained
as follows;

Distance 4 - approximately 172 feet

(52.5 m)

Distance 3 - approximately 130 feet

(40 m)

Distance 2 - approximately 106 feet

(32.5 m)

Distance 1 - approximately 82 feet

(25 m)

✽

✽

NOTICE

The smart cruise control system
remember the last vehicle to vehicle
distance which the driver used in the
vehicle with AEB.

OPS057123N

OPS057125N

Distance 4

Distance 2

OPS057124N

Distance 3

OPS057122N

Distance 1

6 77

Driving your vehicle

• The vehicle will maintain the set

speed, when the lane ahead is clear.

• The vehicle will slow down or

speed up within selected speed to
maintain the selected distance,
when there is a vehicle ahead of
you in the lane. (A vehicle will
appear in front of your vehicle in
the LCD display only when there is
an actual vehicle in front of you)

• If the vehicle ahead speeds up,

your vehicle will travel at a steady
cruising speed after accelerating to
the selected speed.

• The warning chime sounds and

LCD display blinks if it is hard to
maintain the selected distance to
the vehicle ahead.

• If the warning chime sounds,

actively adjust the vehicle speed by
depressing the brake pedal
according to the road condition
ahead and driving condition.

• Even if the warning chime is not acti-

vated, always pay attention to the
driving conditions to prevent danger-
ous situations from occurring.

If the vehicle ahead (vehicle speed:
less than 20 mph (30 km/h)) moves to
the next lane, the warning chime will
sound and a message will appear.
If a vehicle enters into your lane mov-
ing less than the designated speed,
you can adjust your vehicle speed by
depressing the brake pedal.

Radar to detect distance to the
vehicle ahead

The sensor detects distance to the
vehicle ahead.
If the sensor is covered with dirt or
other foreign matter, the vehicle to
vehicle distance control may not
operate correctly.
Always keep the sensor clean.

OPS057133N

OPS056126N

Driving your vehicle

78

6

Radar check message
If the radar or cover is dirty or
obscured with foreign matter such as
snow, this message (“Smart Cruise
Control disabled temporarily”) will
appear and it will disappear after for
a while. In this case, the system may
not function temporarily, but it does
not indicate a malfunction of the
Smart Cruise Control System. Clean
the radar or cover by using a soft
cloth and it will operate normally.

SCC (Smart Cruise Control)
malfunction message
The message (“Check Smart Cruise
Control System”) will appear when
the vehicle to vehicle distance control
system is not functioning normally.
Take your vehicle to an authorized
Kia dealer and have the system
checked.

• Always keep the sensor and

bumper clean.

• Use only a genuine Kia sensor

cover for your vehicle.

• Do not install accessories around

the sensor and do not replace the
bumper by yourself. It may interfere
with the sensor performance.

• Impact damage to the sensor or

sensor area may cause the sensor
to move slightly off position and
result in the SCC not operating
correctly without any warning or
indicator from the cluster. If this
occurs, have your vehicle checked
by an authorized Kia dealer as
soon as possible.

• Do not apply license plate frame or

foreign objects such as a bumper
sticker or a bumper guard near the
radar sensor.

Doing so may

adversely affect the sensing per-
formance of the radar.

• Always keep the radar sensor and

lens cover clean and free of dirt
and debris.

• Use only a soft cloth to wash the

vehicle. Do not spray pressurized
water directly on the sensor or sen-
sor cover.

• Be careful not to apply unneces-

sary force on the radar sensor or
sensor cover. If the sensor is
forcibly moved out of proper align-
ment, the Smart Cruise Control
System may not operate correctly.
In this case, a warning message
may not be displayed. Have the
vehicle inspected by an authorized
Kia dealer.

• If the front bumper becomes dam-

aged in the area around the radar
sensor, the Smart Cruise Control
System may not operate properly.
Have the vehicle inspected by an
authorized Kia dealer.

CAUTION

- Sensor

Damage

To prevent sensor cover dam-
age from occurring, wash the
car with a soft cloth.

6 79

Driving your vehicle

• Use only genuine Kia parts to

repair or replace a damaged sen-
sor or sensor cover. Do not apply
paint to the sensor cover.

To adjust the sensitivity of
Smart Cruise Control

The sensitivity of vehicle speed when
following the front vehicle to maintain
the set distance can be adjusted. Go
to the User Settings Mode (Driving
Assist) and select SCC (Smart
Cruise Control). You may select one
of the three stages you prefer.
• Slow:

Vehicle speed following the front
vehicle to maintain the set distance
is slower than normal speed.

• Normal:

Vehicle speed following the front
vehicle to maintain the set distance
is normal

• Fast:

Vehicle speed following the front
vehicle to maintain the set distance
is faster than normal speed.

✽

✽

NOTICE

The system remembers the last
selected mode.

To convert to cruise control
mode:

The driver may choose to only use
the cruise control mode (speed con-
trol function) by doing as follows:
1.Turn the SCC on (the cruise indi-

cator light will be on but the system
will not be activated).

2.Push the distance to distance

switch for more than 2 seconds.

3.Choose between “Smart cruise

control (SCC) mode” and “Cruise
control (CC) mode”.

WARNING

When using the cruise control
mode, ensure it is safe to use
the feature by assessing the
distance to other vehicles since
the system will not automatical-
ly slow down to avoid an acci-
dent.

Driving your vehicle

80

6

Limitations of the system

The SCC may have limits to its ability
to detect distance to the vehicle ahead
due to road and traffic conditions.

On curves

• On curves, the SCC may not

detect a moving vehicle in your
lane, and then your vehicle could
accelerate to the set speed. Also,
the vehicle speed will rapidly slow
down when the vehicle ahead is
recognized suddenly.

• Select the appropriate set speed

on curves and adjust your vehicle
speed by depressing the accelera-
tor or brake pedal according to the
road condition ahead and driving
condition.

• Your vehicle speed can be reduced

due to a vehicle in the adjacent
lane. Adjust your vehicle speed by
depressing the brake pedal
according to the road condition
ahead and driving condition. Apply
the accelerator pedal and select
the appropriate set speed. Check
to be sure that the road conditions
permit safe operation of the SCC.

OJF055025

OJF055026

6 81

Driving your vehicle

On inclines

• During uphill or downhill driving, the

SCC may not detect a moving vehi-
cle in your lane, and cause your
vehicle to accelerate to the set
speed. Also, the vehicle speed will
rapidly slow down when the vehicle
ahead is recognized suddenly.

• Select the appropriate set speed

on inclines and adjust your vehicle
speed by depressing the accelera-
tor or brake pedal according to the
road condition ahead.

Lane changing

• A vehicle which moves into your

lane from an adjacent lane cannot
be recognized by the sensor until it
is in the sensor's detection range.

• The sensor may not detect imme-

diately when a vehicle cuts in sud-
denly. Always pay attention to the
traffic, road and driving conditions.

• If a vehicle which moves into your

lane is slower than your vehicle, your
speed may decrease to maintain the
distance to the vehicle ahead.

• If a vehicle which moves into your

lane is faster than your vehicle,
your vehicle will accelerate to the
selected speed.

• Your vehicle may accelerate when

a vehicle ahead of you disappears.

• When you are warned that the

vehicle ahead of you is not detect-
ed, drive with caution.

OPS056127N

OJF055028

OJF055049

Driving your vehicle

82

6

Vehicle recognition

Some vehicles ahead in your lane
cannot be recognized by the sensor
as follows:
- Narrow vehicles such as motorcy-

cles or bicycles

- Vehicles offset to one side
- Slow-moving vehicles or sudden-

decelerating vehicles

- Stopped vehicles
- Vehicles with small rear profile such

as trailers with no loads

A vehicle ahead cannot be recog-
nized correctly by the sensor if any of
following occurs:
-

When the vehicle is pointing

upwards due to overloading in the
liftgate

- While making turns by steering
- When driving to one side of the lane
- When driving on narrow lanes or on

curves

Adjust your vehicle speed by
depressing the brake pedal accord-
ing to the road condition ahead and
driving condition.

• If the vehicle right in front moves to

another direction, the SCC system
may not be able to avoid a not
immediately sense a stopped vehi-
cle in front and may crash. Always
maintain a safe distance and be
prepared to apply the brake pedal
manually.

OJF055048

OJF055029

6 83

Driving your vehicle

• Always look out for pedestrians

when your vehicle is maintaining a
distance with the vehicle ahead.

• Always be cautious for vehicles

that are taller with higher clear-
ance, or vehicles carrying loads
that stick out of the back of the
vehicle.

OJF055050

OPS056128N

WARNING

- Emergency

Stops

The smart cruise control sys-
tem cannot guarantee the stop-
ping in every emergency situa-
tion.
If an emergency stop is neces-
sary, you must apply the brakes.

WARNING

- Safe Use of

SCC

The SCC can provide you with an
additional level of safety and
fatigue reduction. However you
must maintain careful observa-
tion of the roadway in front and
around you and maintain control
of your vehicle and spacing
around other vehicles as you
normally would. For example,
this will require you to apply the
brakes as needed when coming
upon a slower moving vehicle, or
when a vehicle from another lane
drives quickly in front of you.

WARNING

- Inclines &

Towing

Do not use SCC on steep
inclines or when towing another
vehicle or trailer since such
extreme loading can interfere
with your vehicle's ability to
maintain the selected speed.

Driving your vehicle

84

6

When using the Smart Cruise
Control take the following precau-
tions:
• If an emergency stop is necessary,

you must apply the brakes. The
vehicle cannot be stopped at every
emergency situation by using the
Smart Cruise Control System.

• Keep a safe distance according to

road conditions and vehicle speed.
If the vehicle to vehicle distance is
too close during a high-speed driv-
ing, a serious collision may result.

• Always maintain sufficient braking

distance and decelerate your vehi-
cle by applying the brakes if neces-
sary.

• The Smart Cruise Control System

cannot recognize a stopped vehi-
cle, pedestrians or an oncoming
vehicle. Always look ahead cau-
tiously to prevent unexpected and
sudden situations from occurring.

• Vehicles moving in front of you with

a frequent lane change may cause
a delay in the system's reaction or
may cause the system to react to a
vehicle actually in an adjacent
lane. Always drive cautiously to
prevent unexpected and sudden
situations from occurring.

• Always be aware of the selected

speed and vehicle to vehicle dis-
tance. The driver should not solely
rely on the system but always pay
attention to driving conditions and
control your vehicle speed.

• The Smart Cruise Control System

may not recognize complex driving
situations so always pay attention
to driving conditions and control
your vehicle speed.

• Make sure to be well informed of

the owner's manual and practice
using the smart cruise control sys-
tem to ensure the safe use of the
system.

• After an engine start, please stop

for several seconds. If system ini-
tialization is not completed, the
SCC does not normally operate.

• After an engine start, if any objects

are not detected or the sensor
cover is obscured with foreign sub-
stances, there is a possibility that
the SCC system may not work.

• The following conditions may

cause a malfunction: over-loading
the liftgate, suspension modifica-
tion, tire replacement with unau-
thorized tires or tires with different
tread wear and pressure levels.

6 85

Driving your vehicle

Outside rearview mirror may not
alert the driver when:

- The outside rearview mirror hous-

ing is severely polluted

- The window is severely polluted
- The windows are severely tinted.

This device complies with Part 15
of the FCC rules.

Operation is subject to the following
three conditions:
1. This device may not cause harm-

ful interference, and

2. This device must accept any inter-

ference received, including inter-
ference that may cause undesired
operation.

3. Changes or modifications not

expressly approved by the party
responsible for compliance could
void the user’s authority to operate
the device.

Radio frequency radiation expo-
sure information:

This equipment complies with FCC
radiation exposure limits set forth for
an uncontrolled environment.
This equipment should be installed
and operated with minimum distance
of 20 cm between the radiator
(antenna) and your body.
This transmitter must not be co-
located or operating in conjunction
with any other antenna or transmit-
ter.

Driving your vehicle

86

6

The drive mode may be selected
according to the driver’s preference
or road condition.
The system resets to be in the ECO
mode, when the hybrid system is
restarted.
If there is a problem with the instru-
ment cluster, the drive mode will be
in ECO mode and may not change to
NORMAL mode or SPORT mode.

The mode changes whenever the
DRIVE MODE button is pressed.
■ Except DCT

■ For DCT

❈ When normal mode is selected, it

is not displayed on the cluster.

ECO mode (Active ECO)

Active ECO helps improve
fuel efficiency by control-
ling certain engine and
transaxle system operat-
ing parameters. Fuel effi-
ciency depends on the
driver's driving habit and
road condition.
• When the DRIVE MODE

button is pressed and
the ECO mode is select-
ed, the ECO indicator
(green) will illuminate to
show that the Active
ECO is operating.

• When the Active ECO is

activated, it does not turn
off even though the
engine is restarted again.
To turn off the system,
press the DRIVE MODE
button again.

DRIVE MODE INTEGRATED CONTROL SYSTEM (IF EQUIPPED)

OPS056118

ECO

NORMAL

SPORT ECO

NORMAL

SPORT

6 87

Driving your vehicle

When Active ECO is activated:

• The acceleration may slightly be

reduced even though you depress
the accelerator fully.

• The air conditioner performance

may be limited

• The shift pattern of the automatic

transaxle may change.

• The engine noise may get louder.

The above situations are normal
conditions when the active eco sys-
tem is activated to improve fuel effi-
ciency.

Limitation of Active ECO operation:

If the following conditions occur while
Active ECO is operating, the system
operation is limited even though there
is no change in the ECO indicator.
• When the coolant temperature is

low:
The system will be limited until
engine performance becomes nor-
mal.

• When driving up a hill:

The system will be limited to gain
power when driving uphill because
the engine torque is restricted.

• When using manual mode:

The system will be limited accord-
ing to the shift location.

• When the accelerator pedal is

deeply depressed for a few seconds:
The system will be limited, judging
that the driver wants to speed up.

SPORT mode

SPORT mode focuses on dynamic
driving by automatically controlling
the steering wheel, engine and
transaxle system.
• When the DRIVE MODE button is

pressed and the SPORT mode is
selected, the SPORT indicator
(yellow) will illuminate.

• Whenever the hybrid system is

restarted, the Drive Mode will revert
back to ECO mode. If SPORT mode
is desired, re-select SPORT mode
from the DRIVE MODE button

• If the system is activated:

- After speeding, it maintains the

gear and RPM for some time
even though the accelerator
pedal is not depressed.

- Up-shifting is delayed.

✽

✽

NOTICE

In Sport drive mode, the fuel effi-
ciency may decrease.

Driving your vehicle

88

6

This system detects the lane with a
sensor at the front windshield and
notifies you if it detects that your
vehicle leaves the lane.

• The LDWS does not make the

vehicle change lanes. It is the dri-
ver's responsibility to always check
the road conditions.

• If the sensor cannot detect the lane

or if the vehicle speed does not
exceed 40 mph (64 km/h), the
LDWS will not be able to notify you
if the vehicle leaves the lane.

• If your vehicle has window tint or

other types of coating on the front
windshield, the LDWS may not
work properly.

• Prevent damage to the LDWS sen-

sor from water or any liquid.

• Do not remove the LDWS parts

and avoid damaging the sensor by
avoiding strong impacts.

• Do not put objects that reflect light

on the dash board.

• The operation of the LDWS can be

affected by several factors (includ-
ing environmental conditions). It is
the responsibility of the driver to
pay attention to the roadway and to
maintain the vehicle in it's lane at
all times.

LANE DEPARTURE WARNING SYSTEM (LDWS) (IF EQUIPPED)

WARNING

- LDWS Alert

The LDWS is a supplemental
system and only intended to
provide you with information
regarding your vehicle's posi-
tion on the roadway. Upon
receiving an LDWS alert, you
must take the necessary steps
to maintain control of your vehi-
cle. The LDWS does not provide
any steering inputs into the
vehicle for you. It can be dan-
gerous to make a large sudden
steering input in response to an
alert, since that could result in
loss of control.

OPS056039L

OPS055040N

OPS056115L

6 89

Driving your vehicle

To operate the LDWS, press the but-
ton with the engine start/stop button
in the ON position. The indicator illu-
minates on the cluster. To cancel the
LDWS, press the button again.

If the system detects that your vehi-
cle is leaving the lane when the
LDWS is operating and vehicle
speed exceeds 40 mph (64 km/h),
the warning operates as follows:

1.Visual warning
If you leave the lane, the lane you
leave on the LCD display blinks yel-
low.

2.Auditory warning
If you leave the lane, the warning
sound operates.

OPS046467L

OPS046466L

■ When the sensor detects the lane line

■ When the sensor doesn’t detect the lane line

OPS056068L

OPS046468L

OPS046469L

■ Left lane departure warning

■ Right lane departure warning

Driving your vehicle

90

6

The color of symbol will change
depend on the condition of LDWS
system.
- White color : When you activate the

lane departure warn-
ing system by press-
ing the LDWS button,
system operating con-
ditions are not satis-
fied or the sensor does
not detect the lane line

- Green color : When you activate the

lane departure warn-
ing system by press-
ing the LDWS button,
system operating con-
ditions are satisfied
and the sensor detect
the lane line

- Yellow color : when there is a mal-

function with the lane
departure warning
system.

Warning indicator

When the LDWS is not working prop-
erly, the warning light will illuminate
and the warning message will come
on for a few seconds. After the mes-
sage disappears, the master warning
light will illuminate.
Take your vehicle to an authorized Kia
dealer and have the system checked.

OPS056068L

OJF055246L

OPS056069L