KIA Sedona (2018 year). Instruction — part 17

4 165

Features of your vehicle

✽

NOTICE

Never place anything over the sensor
located on the instrument panel to
ensure better control of the heating
and cooling system.

Manual heating and air condi-
tioning

The heating and cooling system can
be controlled manually by pressing
buttons or turning knob(s) other than
the AUTO button. In this case, the
system works sequentially according
to the order of buttons or knob(s)
selected.
1. Start the engine.
2. Set the mode to the desired posi-

tion.

For improving the effectiveness of
heating and cooling;
- Heating:
- Cooling:

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system on.

Press the AUTO button in order to
convert to full automatic control of
the system.

OYP044223K

Features of your vehicle

166

Mode selection

The mode selection button controls
the direction of the air flow through
the ventilation system.
The air flow outlet port is converted
as follows:

Refer to the illustration in the
“Manual climate control system”.

Face-Level

Air flow is directed toward the upper
body and face. Additionally, each
outlet can be controlled to direct the
air discharged from the outlet.

Bi-Level

Air flow is directed towards the face
and the floor.

Floor-Level

Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and
side window defrosters.

Floor/Defrost-Level

Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.

OYP044224K

■

Type A

■

Type B

4 167

Features of your vehicle

Defrost-Level

Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.

Instrument panel vents

The outlet vents can be opened or
closed separately using the thumb-
wheel (if equipped).
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

Temperature control

The temperature will increase to the
maximum (HI) by turning the knob to
the extreme right.
The temperature will decrease to the
minimum (Lo) by turning the knob to
the extreme left.
When turning the knob, the tempera-
ture will increase or decrease by
1°F/0.5°C. When set to the lowest
temperature setting, the air condi-
tioning will operate continuously.

OYP044225K

■

Type A

■

Type B

OYP044206K

OYP044226K

■

Driver’s side

■

Passenger’s side

Features of your vehicle

168

Adjusting the driver and passenger
side temperature equally

1. Press the SYNC button to activate

SYNC mode. The passenger side
temperature will be set to the
same temperature as the driver
side.

2. Operate the driver side tempera-

ture control knob. The driver and
passenger side temperature will
be adjusted equally.

Adjusting the driver and passenger
side temperature individually

1. Press the SYNC button again to

operate the driver and passenger
side temperature individually. Also,
if the passenger side temperature
control knob is operated, it will
individually.

2. Operate the left temperature con-

trol to adjust the driver side tem-
perature. Operate the right side
temperature control to adjust the
passenger side temperature.

When the driver side temperature is
set to the highest (HI) or lowest (Lo)
temperature setting, the SYNC mode
is deactivated for maximum heating
or cooling.

Temperature conversion

You can switch the temperature
mode from Centigrade to Fahrenheit
as follows:
While pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The display will change from
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.

OYP044227K

4 169

Features of your vehicle

Outside thermometer

The current outside temperature is
displayed in 1°F (1°C) increments.
The temperature range is between -
40°F ~ 140°F (-40°C ~ 60°C).
• The outside temperature on the

display may not change immedi-
ately like a general thermometer to
prevent the driver from being inat-
tentive.

Air intake control

This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi-
tion, push the control button.

OYP044311N

OYP044310N

OYP044309N

OYP047228L

Features of your vehicle

170

Recirculated air position

With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat-
ing system and heated
or cooled according to
the function selected.

Outside (fresh) air position

With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.

Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas-
senger compartment may become
stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in exces-
sively dry air in the passenger com-
partment.

Sunroof Inside Air Recirculation
(if equipped)

When the heater or air conditioning
system is on with the sunroof
opened, the outside (fresh) air posi-
tion will be automatically selected. At
this time, if you press the recirculated
air position button, the recirculated
air position will be selected but will
change back to the outside (fresh) air
position after 3 minutes.
When the sunroof is closed, the air
intake position will return to the orig-
inal position that was selected.

4 171

Features of your vehicle

Fan speed control

The fan speed can be set to the
desired speed by operating the fan
speed control button.
To change the fan speed, press (

)

the button for higher speed, or push
(

) the button for lower speed. To

turn the fan speed control off, press
the front blower OFF button.

OYP044229K

■

Type A

■

Type B

WARNING

- Recirculated

air

Continued use of the climate
control system in the recirculat-
ed air position can cause
drowsiness or sleepiness, and
loss of vehicle control. Set the
air intake control to the outside
(fresh) air position as much as
possible while driving.

WARNING

- Reduced

visibility

Continued use of the climate
control system in the recirculat-
ed air position may allow
humidity to increase inside the
vehicle which may fog the glass
and obscure visibility.

WARNING

- Sleeping

with AC on

Do not sleep in a vehicle with
the air conditioning or heating
system on as this may cause
serious harm or death due to a
drop in the oxygen level and/or
body temperature.

Features of your vehicle

172

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.

OFF mode

Press the front blower OFF button to
turn off the front air climate control
system. However, you can still oper-
ate the mode and air intake buttons
as long as the ignition switch is in the
ON position.

Climate information screen selec-
tion (for Type B)

Press the climate information screen
selection button to display climate
information on the screen.

OYP044231K

OYP044253N

OYP047230L

4 173

Features of your vehicle

OYP044234K

1. Rear temperature control button

2. Rear AUTO button

3. Rear mode selection button

4. Rear air conditioning OFF button

5. Rear fan speed control button

■

Rear

Features of your vehicle

174

Rear climate control
(if equipped)

To turn on the rear climate control
system;

From the front seat

1. Set the rear climate control selec-

tion (REAR ON) button in the front
climate control panel to the ON
position.

2. Set the rear fan speed control but-

ton in the front climate control
panel to the desired position.

3. Set the rear temperature control

knob in the front climate control
panel to the desired position. (if
equipped)

From the rear seat

1. Set the rear climate control selec-

tion (REAR ON) button in the front
climate control panel to the ON
position.

2. Set the rear climate control selec-

tion(REAR LOCK) button in the
front climate control panel to the
OFF position.

3. Set the rear fan speed control but-

ton on the rear climate control
panel to the desired position.

4. Set the rear temperature control

button on the rear climate control
panel to the desired position.

5. Select the desired rear mode but-

ton on the rear climate control
panel. (if equipped)

6. To turn off the rear air conditioning

system press the off button in the
rear climate control panel.

Rear fan speed control

From front seat

) the button for higher speed, or

press the (

) the button for lower

speed. To turn the fan speed control
off, press the REAR ON button.

OYP044235K

4 175

Features of your vehicle

From rear seat (if equipped)

Set the rear climate control selection
(REAR ON) button in the front cli-
mate control panel to the ON posi-
tion and set the rear climate control
selection(REAR LOCK) button in the
front climate control panel to the
OFF position and press the rear fan
speed control button on the rear con-
trol panel to the desired position.
To change the fan speed, press
(

) the button for higher speed, or

press the (

) the button for lower

speed. To turn the fan speed control
off, press the rear blower OFF button.

Rear temperature control

From front seat

Set the rear climate control selection
(REAR ON) button to the ON posi-
tion and press the rear fan speed
control button in the front climate
control panel to the desired position.
To change the rear air temperature,
turn the knob to the right position for
warm and hot air or left position for
cooler air.

From rear seat

) for warmer air

or press the button (

) for cooler air.

OYP044236K

OYP044248K

OYP044237K

Features of your vehicle

176

Rear mode selection (if equipped)

• Front climate control is

Rear air blows from the upper
vents on the rear ceiling.

• Front climate control is

Rear air blows from the upper
vents on the rear ceiling and the
lower vents on the right rear trim
together.

• Front climate control is

Rear air blows from the lower vents
on the right rear trim together.

When the rear climate control selec-
tion (REAR ON) button in the front
climate control panel is in the ON
position and set the rear climate con-
trol selection (REAR LOCK) button in
the front climate control panel to the
OFF position and the rear mode is
selected by pushing the rear mode
selection button on the rear control
panel as follows:

•

: Rear air blows from the upper

vents on the rear ceiling.

•

: Rear air blows from the

upper vents on the rear ceil-
ing and the lower vents on
the right rear trim together.

•

: Rear air blows from the lower

vents on the right rear trim.

OYP044217K

OYP044239K

4 177

Features of your vehicle

Rear vents

The vent can be adjusted by rotating
the blade.

✽

NOTICE

If all the vents are closed, it may
cause some noise. Always open 2
vents or more.

System operation

Ventilation

1. Set the mode to the

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

Heating

1. Set the mode to the

position.

2. Set the air intake control to the

outside (fresh) air position.

3. Set the temperature control to the

desired position.

4. Set the fan speed control to the

desired speed.

5. If dehumidified heating is desired,

turn the air conditioning system (if
equipped) on.

• If the windshield fogs up, set the

mode to the

position.

OYP044166N

Features of your vehicle

178

Operation Tips

• To keep dust or unpleasant fumes

from entering the vehicle through
the ventilation system, temporarily
set the air intake control to the
recirculated air position. Be sure to
return the control to the fresh air
position when the irritation has
passed to keep fresh air in the
vehicle. This will help keep the driv-
er alert and comfortable.

• Air for the heating/cooling system

is drawn in through the grilles just
ahead of the windshield. Care
should be taken that these are not
blocked by leaves, snow, ice or
other obstructions.

• To prevent interior fog on the wind-

shield, set the air intake control to
the fresh air position and fan speed
to the desired position, turn on the
air conditioning system, and adjust
the temperature control to desired
temperature.

Air conditioning (if equipped)

Air Conditioning System in this vehi-
cle is filled with R-134a refrigerant.
1. Start the engine. Press the air con-

ditioning button.

2. Set the mode to the

position.

3. Set the air intake control to the out-

side air or recirculated air position.

4. Adjust the fan speed control and

temperature control to maintain
maximum comfort.

• When maximum cooling is desired,

set the temperature control to the
extreme left position, set the mode
control to the MAX A/C position,
then set the fan speed control to
the highest speed.

CAUTION

- Excessive A/C

When using the air conditioning
system, monitor the engine
coolant closely while driving up
hills or in heavy traffic when out-
side temperatures are high. Air
conditioning system operation
may cause engine overheating
and potential engine damage.
Continue to use the blower fan
but turn the air conditioning sys-
tem off if the engine coolant
temperature gauge indicates
engine overheating.

4 179

Features of your vehicle

Air conditioning system operation tips

• If the vehicle has been parked in

direct sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.

• To help reduce moisture inside of

the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
conditioning system.

• During air conditioning system

operation, you may occasionally
notice a slight change in engine
speed as the air conditioning com-
pressor cycles. This is a normal
system operation characteristic.

• Use the air conditioning system

every month only for a few minutes
to ensure maximum system per-
formance.

• When using the air conditioning

system, you may notice clear water
dripping (or even puddling) on the
ground under the passenger side
of the vehicle. This is a normal sys-
tem operation characteristic.

• Operating the air conditioning sys-

tem in the recirculated air position
provides maximum cooling, how-
ever, continual operation in this
mode may cause the air inside the
vehicle to become stale.

• During cooling operation, you may

occasionally notice a misty air flow
because of rapid cooling and
humid air intake. This is a normal
system operation characteristic.

Climate control air filter
(if equipped)

The climate control air filter installed
behind the glove box filters the dust or
other pollutants that come into the
vehicle from the outside through the
heating and air conditioning system. If
dust or other pollutants accumulate in
the filter over a period of time, the air
flow from the air vents may decrease,
resulting in moisture accumulation on
the inside of the windshield even
when the outside (fresh) air position is
selected. If this happens, have the cli-
mate control air filter replaced by an
authorized Kia dealer.

1LDA5047

Outside air

Recirculated

air

Climate control
air filter

Blower

Evaporator
core

Heater core

Features of your vehicle

180

✽

NOTICE

• Replace the filter every 15,000

miles or once a year.
If the vehicle is being driven in
severe conditions such as dusty or
rough roads, more frequent air
conditioner filter inspections and
changes are required.

• When the air flow rate suddenly

decreases, the system should be
checked at an authorized Kia
dealer.

Checking the amount of air
conditioner refrigerant and
compressor lubricant

When the amount of refrigerant is
low, the performance of the air con-
ditioning is reduced. Overfilling also
has a negative impact on the air con-
ditioning system.
Therefore, if abnormal operation is
found, have the system inspected by
an authorized Kia dealer.

WARNING

- AC Repair

The oil and refrigerant in your
vehicle’s air conditioning sys-
tem is under very high pressure.
If proper service procedures are
not followed an explosion may
result. To reduce the risk of seri-
ous injury or death, the air con-
ditioning system in your vehicle
should only be serviced by
trained and certified technicians.

CAUTION

- AC Repair

It is important that the correct
type and amount of oil and
refrigerant is used, otherwise
damage to the vehicle may
occur. To prevent damage, the
air conditioning system in your
vehicle should only be serviced
by trained and certified techni-
cians.

Была ли эта страница вам полезна?

Да!Нет

4 посетителя считают эту страницу полезной.

KIA Sedona (2018 year). Instruction — part 17

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.