KIA Amanti (2009 year). Instruction — part 7
Knowing your vehicle
AUDIO REMOTE CONTROL (IF EQUIPPED)
VOLUME (▲/▼)
If the PRESET button is pressed for
less than 0.8 second, it will work as
• Press the VOLUME
(▲) button to
follows in each mode. (if equipped)
increase volume.
• Press the VOLUME
(▼) button to
decease volume.
RADIO mode
It will function as the PRESET UP select
button.
PRESET
If the PRESET button is pressed for
CD mode
0.8 second or more, it will work as fol-
It will function as the TRACK UP button.
lows in each mode.
OGH036400
The steering wheel audio remote control
CDC mode
RADIO mode
button is installed to promote safe driv-
It will function as the TRACK UP button.
ing.
It will function as the SEEK UP select
button.
Detailed information for audio control
✽ NOTICE
buttons is described in the following
CD mode
Do not operate audio remote control
pages in this section.
It will function as the FF button.
buttons simultaneously.
CDC mode
MODE
It will function as the DISC UP button.
Press the MODE button to select Radio,
CD (Compact Disc) or CDC* (Compact
Disc Changer).*
Each press of the button changes the
display as follows:
RADIO (FM1 ➝ FM2 ➝ AM) ➝ CD ➝ CDC*
* : if equipped
3 99
Knowing your vehicle
AUDIO SYSTEM (IF EQUIPPED)
FM reception
AM reception
FM radio station
JBM001
JBM002
JBM003
How car audio works
AM broadcasts can be received at
FM broadcasts are transmitted at high
greater distances than FM broadcasts.
frequencies and do not bend to follow the
AM and FM radio signals are broadcast
This is because AM radio waves are
earth's surface. Because of this, FM
from transmitter towers located around
transmitted at low frequencies. These
broadcasts generally begin to fade at
your city. They are intercepted by the
long, low frequency radio waves can fol-
short distances from the station. Also,
radio antenna on your car. This signal is
low the curvature of the earth rather than
FM signals are easily affected by build-
then received by the radio and sent to
travelling straight out into the atmos-
ings, mountains, or other obstructions.
your car speakers.
phere. In addition, they curve around
These can result in certain listening con-
When a strong radio signal has reached
obstructions so that they can provide bet-
ditions which might lead you to believe a
your vehicle, the precise engineering of
ter signal coverage.
problem exists with your radio. The fol-
your audio system ensures the best pos-
lowing conditions are normal and do not
sible quality reproduction. However, in
indicate radio trouble:
some cases the signal coming to your
vehicle may not be strong and clear. This
can be due to factors such as the dis-
tance from the radio station, closeness of
other strong radio stations or the pres-
ence of buildings, bridges or other large
obstructions in the area.
3 100
Knowing your vehicle
Using a cellular phone or a two-
way radio
When a cellular phone is used inside the
vehicle, noise may be produced from the
audio equipment. This does not mean
that something is wrong with the audio
equipment. In such a case, use the cellu-
lar phone at a place as far as possible
from the audio equipment.
CAUTION
JBM004
JBM005
When using a communication sys-
tem such a cellular phone or a radio
•
Fading - As your car moves away from
•
Multi-Path Cancellation - Radio signals
set inside the vehicle, a separate
the radio station, the signal will weaken
being received from several directions
and sound will begin to fade. When this
can cause distortion or fluttering. This
external antenna must be fitted.
When a cellular phone or a radio set
occurs, we suggest that you select
can be caused by a direct and reflect-
is used with an internal antenna
another stronger station.
ed signal from the same station, or by
alone, it may interfere with the vehi-
•
Flutter/Static
- Weak FM signals or
signals from two stations with close
cle's electrical system and adverse-
large obstructions between the trans-
frequencies. If this occurs, select
ly affect safe operation of the vehi-
mitter and your radio can disturb the
another station until the condition has
cle.
signal causing static or fluttering nois-
passed.
es to occur. Reducing the treble level
may lessen this effect until the distur-
bance clears.
WARNING
•
Station Swapping - As a FM signal
Don’t use a cellular phone when
weakens, another more powerful sig-
you are driving. The driver should
nal near the same frequency may
stop at a safe place to use a cellular
begin to play. This is because your
phone.
radio is designed to lock onto the clear-
est signal. If this occurs, select anoth-
er station with a stronger signal.
3 101
Knowing your vehicle
Care of disc (if equipped)
• Depending on the type of CD-R/CD-
RW CDs, certain CDs may not operate
•
If the temperature inside the car is too
normally according to manufacturing
high, open the car windows for ventilation
companies or making and recording
before using your car audio.
methods. In such circumstances, if you
•
Do not apply volatile agents such as
still continue to use those CDs, they
benzene and thinner, normal cleaners
may cause the malfunction of your car
and magnetic sprays made for ana-
audio system.
logue disc onto CDs.
•
To prevent the disc surface from get-
✽ NOTICE - Playing an
ting damaged. Hold and carry CDs by
Incompatible Copy-Protected
the edges or the edges of the center
Audio CD
hole only.
Some copy-protected CDs, which do not
•
Clean the disc surface with a piece of soft
comply with the international audio CD
cloth before playback (wipe it from the
standards (Red Book), may not play on
center to the outside edge.)
your car audio. Please note that if you
•
Do not damage the disc surface or
try to play copy protected CDs and the
attach pieces of sticky tape or paper
CD player of your car audio is not per-
onto it.
forming to your expectation, this may be
•
Make sure on undesirable matter other
caused by those CDs and not a defect in
than CDs are inserted into the CD
the device itself. Please replace those
CDs.
player (Do not insert more than one
CD at a time).
•
Keep CDs in their cases after use to
protect them from scratches or dirt.
3 102
Knowing your vehicle
RADIO, SET UP, VOLUME CONTROL(CDP MODEL)
1. FM/AM Selection Button
2. Automatic Channel Selection Button
3. SCAN Button
4. MUTE Button
5. Pre-set Button
6. SET UP Button
7. TUNE/ENTER Button
8. Power ON/OFF/Volume Control Button
A-200GHU
3 103
Knowing your vehicle
RADIO, SET UP, VOLUME CONTROL(6CDC MODEL)
MONITOR
1. FM/AM Selection Button
2. Automatic Channel Selection Button
3. SCAN Button
4. MUTE Button
5. Pre-set Button
6. SET UP Button
7. TUNE/ENTER Button
8. Power ON/OFF/Volume Control Button
A-300GHU
3 104
Knowing your vehicle
1. FM/AM Selection Button
5. Pre-set Selection Button
■ Setting the SET UP Mode
Turns to FM or AM mode and toggles
• Push [1]~[6] buttons less than 0.8 sec-
Press the
[TUNE/ENTER] Button to
FM1➟FM2➟AM➟...➟FM1➟... when the
onds to play the channel saved in each
select and make adjustments to the
button is pressed each time.
button.
desired mode within SET UP Mode.
• Push pre-set button for 0.8 seconds or
2. Automatic Channel Selection
longer to save current channel to the
•
While in SOUND Mode, press the
Button
respective button with a beep.
[TUNE/ENTER] Button to change in
• When the [TRACK
] is pressed, it
the order of BASS➟MIDDLE➟TREBLE
will automatically tune to the previous
6. SET UP Button
➟FADER➟BALANCE➟SET UP Mode.
lower station.
Turn the
[TUNE/ENTER] Button in
•
The SET UP Mode is displayed if the
clockwise or counterclockwise direc-
• When the [SEEK
] is pressed, it will
[SET UP] Button is pressed. While in
tion to make adjustments for each SUB
automatically tune to the next higher
SET UP Mode, use the [TUNE/ENTER]
Mode.
station.
Button to set the SOUND(BASS, MID-
DLE, TREBLE, FADER, BALANCE),
•
While in SAT Mode, press the [TUNE/
3. SCAN Selection Button
SAT(CHANNEL/TITLE, CATEGORY/
CHANNEL), CLOCK(12, 24), TEMP
ENTER] Button to display the "CHAN-
When the button is pressed, it automati-
NEL/TITLE, CATEGORY/CHANNEL".
(°C, °F) and SCROLL(ON, OFF).
cally only [SCAN] up. The sound hearing
Rotate the [TUNE/ENTER] Button to
for
5 seconds per all searched station
•
To exit from SET UP Mode, press
select the SUB Mode and press the
preset.
"RETURN" or wait 10 seconds.
[TUNE/ENTER] Button to set.
•
Method of adjusting the SET UP is the
4. MUTE Selection Button
same for CDP, AUX, USB, and iPod
•
While in CLOCK Mode, press the
Mode.
Push button to stop sound and [MUTE] is
[TUNE/ENTER] Button to display the
displayed.
"ON, OFF".
Rotate the [TUNE/ENTER] Button to
select the SUB Mode and press the
[TUNE/ENTER] Button to set.
(CLOCK Mode CDC Only)
3 105
Knowing your vehicle
• While in TEMP Mode, press the [TUNE
8. Power ON/OFF & Volume
/ENTER] Button to display the "°C, °F".
Control Button
Rotate the [TUNE/ENTER] Button to
Turns on/off the set when the IGNITION
select the SUB Mode and press the
SWITCH is on ACC or ON. If the button
[TUNE/ENTER] Button to set.
is turned to the right, it increases the vol-
(TEMP Mode CDC Only)
ume and left, decreases the volume.
channel is found.
• While in SCROLL Mode, press the
[TUNE/ENTER] Button to display the
"ON, OFF".
Rotate the [TUNE/ENTER] Button to
select the SUB Mode and press the
[TUNE/ENTER] Button to set.
7. TUNE/ENTER Button
• Turn this button clockwise by one notch
to increase frequency by 200KHz(AM:
10KHz) from current frequency.
• Turn this button counterclockwise by
one notch to decrease frequency by
200KHz(AM:10KHz)from current fre-
quency.
• Press this button while holding SET
UP button to activate/inactivate the
item to select SET UP item using left
and right function of the Tune button.
3 106
Knowing your vehicle
CDP(CDP MODEL)
1. CD Loading Slot
2. CD Indicator
3. Automatic Track Selection Button
4. SCAN Play Button
5. MUTE Button
6. RANDOM Play Button
7. REPEAT Play Button
8. INFO Selection Button
9. FOLDER Search Button
10. CD Selection Button
11. File(Track) Search/ENTER Button
12. CD Eject Button
A-200GHU
3 107
Knowing your vehicle
CD(6CDC MODEL)
MONITOR
1. CD Loading Slot
2. CD Indicator
3. Automatic Track Selection Button
4. SCAN Play Button
5. MUTE Button
6. RANDOM Play Button
7. REPEAT Play Button
8. INFO Selection Button
9. Folder Search Button
10. CD Selection Button
11. File(Track) Search/ENTER Button
12. CD Eject Button
13. CD LOAD Button
14. DISC UP/DOWN Button
A-300GHU
3 108
Knowing your vehicle
1. CD Loading Slot
7. REPEAT Play Button
• Push [SEEK
] button for less than
Please face printed side upward and gen-
0.8 seconds to play the next song.
Press this button for less than 0.8 sec-
tly push in. When the ignition switch is on
onds to activate 'RPT' mode and more
• Push
[SEEK
] button for
0.8 or
ACC or ON and power is off, power is
than 0.8 seconds to activate 'FLD RPT'
longer to initiate high speed sound
automatically turned on if the CD is
mode.
search of current song.
loaded. This CDP supports only 12cm
• RPT : Only a track(file) is repeatedly
CD. If VCD, Data CD are loaded, Reading
4. SCAN Play Button
played back.
"Error message" will appear and CD will
• FLD RPT(MP3/WMA Only) : Only files
be ejected.
Plays first 10 seconds of each song in
in a folder are repeatedly played back.
the CD. To cancel the mode, press the
key once again.
2. CD Indicator
8. INFORMATION Selection
• When car ignition switch is ACC or ON
Button
5. MUTE Button
and if the CD is loaded, this indicator is
Press this button to temporarily cut off
Displays the information of the current
lighted. If the CD is ejected the light is
the Sound. "Mute" is displayed on the
CD TRACK(FILE) as below when the
turned off(CDP Only).
LCD. Press the button once again to can-
button is pressed each time.
• If the LOAD button is pressed, this indi-
cel MUTE mode.
• CDDA : DISC TITLE➟DISC ARTIST➟
cator will begin to blink(CDC Only).
TRACK TITLE➟TRACK ARTIST➟
TOTAL TRACK➟...
6. RANDOM Play Button
3. Automatic Track Selection
• MP3/WMA
: FILE NAME➟TITLE➟
Button
Press this button for less than 0.8 sec-
ARTIST➟ALBUM➟FOLDER NAME➟
onds to activate 'RDM' mode and more
• Push [TRACK
] button for less than
TOTAL FILE➟...
than 0.8 seconds to activate 'ALL RDM'
0.8 seconds to play from the beginning
mode.
of current song.
• RDM : Only files/tracks in a folder/disc
9. Folder Search Button
• Push [TRACK
] button for less than
are played back in a random
• Folder name/File name(the first song
0.8 seconds and press again within 1
sequence.
in the folder) is moved up or down from
seconds to play the previous song.
• ALL RDM(MP3/WMA Only) : All files in
currently playing folder.
• Push
[TRACK
] button for
0.8 or
a disc are played back in the random
• To select to the displayed folder, press
longer to initiate reverse direction high
sequence.
ENTER(NO.11) button.
speed sound search of current song.
3 109
Knowing your vehicle
10. CD Selection Button
13. CD LOAD Button(CDC Only)
• If there is a cd in the CDP DECK it
• Press this button for less than 0.8 sec-
turns to CD mode when the button is
onds to load CD into deck.
pressed each time.
• Press this button for more than
0.8
• If no Disc, it displays "NO DISC" and
seconds to load CDs into all available
returns to th previous mode.
deck(from 1~6).
• The last CD will play. 10 seconds idle
status will disable loading process.
11. File(Track) Search/ENTER
Button
• Turn this button clockwise to display
14. DISC UP/DOWN Button(CDC
Track NO(File name) after current
Only)
song.
Disc is moved up or down from currently
• Turn this button counterclockwise to
playing disc.
display Track NO(File Name) before
current song.
• To select to the displayed song, press
the button.
12. CD Eject Button
• Press this button to eject the CD during
CD playback.
• If no CD is in the deck, "NO DISC" will
be displayed and returns to the previ-
ous mode.
❈ ALL EJECT(CDC ONLY)
Press this button for more than 0.8 sec-
onds to eject all discs inside the decks in
respective order.
3 110
Knowing your vehicle
(Continued)
(Continued)
CAUTION - Using USB
device
•
Depending on the condition of
•
If you dismount the external USB
the external USB device, the con-
device during playback in USB
•
To use the external USB device,
nected external USB device can
mode, the external USB device can
make sure the device is not
be unrecognizable.
be damaged or malfunction.
mounted when starting up the
•
When the formatted byte/sector
Therefore, mount the external USB
vehicle and mount the device
setting of External USB devices is
device when the engine is turned
after starting up.
not either 512BYTE or 2048BYTE,
off or in another mode.
•
If you start the vehicle when the
then the device will not be recog-
•
Depending on the type and capac-
USB device is mounted, it may
nized.
ity of the external USB device or
damage the USB device. (USB is
•
Only the USB device formatted to
the type of the files stored in the
not ESA)
FAT 12/16/32.
device, there is a difference in the
•
If the vehicle is started up or
time taken for recognition of the
turned off while the external USB
•
USB device without USB IF authen-
device, but this is not a trouble
device is connected, the external
tication may not be recognizable.
Please wait for a moment.
USB device may not work.
•
Make sure the USB connection
•
Do not use the USB device for other
•
It may not play inauthentic MP3 or
terminal does not come in contact
with human body or any object.
purposes than playing music files.
WMA files.
•
Use of USB accessories such as
1) It can only play MP3 files with
•
If you repeat mounting or dis-
mounting USB device in a short
the recharger or heater using USB
the compression rate between
I/F may lower the performance or
period of time, it may break the
8Kbps~320Kbps.
cause trouble.
device.
2) It can only play WMA music
•
If you use devices such as the
•
You might hear strange noise
files with the compression rate
USB hub you purchased separate-
when mounting or dismounting a
between 8Kbps~320Kbps.
ly, the vehicle’s audio system may
USB device.
•
Take cautions for static electricity
not recognize the USB device.
(Continued)
when mounting or dismounting
Connect the USB device directly
the external USB device.
to the multimedia terminal of the
•
Encoded MP3 PLAYER is not rec-
vehicle.
ognizable.
(Continued)
3 111
Knowing your vehicle
USING USB(CDP MODEL)
1. AUX(USB) Selection Button
2. Automatic Track Selection Button
3. SCAN Play Button
4. RANDOM Play Button
5. REPEAT Play Button
6. INFO Selection Button
7. Folder Search Button
8. File Search/ENTER Button
A-200GHU
3 112
Knowing your vehicle
USING USB(CDC MODEL)
MONITOR
1. AUX(USB) Selection Button
2. Automatic Track Selection Button
3. SCAN Play Button
4. RANDOM Play Button
5. REPEAT Play Button
6. INFO Selection Button
7. Folder Search Button
8. File Search/ENTER Button
A-300GHU
3 113
Knowing your vehicle
1. AUX/USB Selection Button
4. RANDOM Play Button
7. Folder Search Button
• If auxiliary device/USB/ is connected, it
Press this button for less than 0.8 sec-
• Folder name/File name(the first song
onds to activate 'RDM' mode and more
turns to AUX/USB mode and toggles
in the folder) is moved up or down from
as below when the button is pressed
than 0.8 seconds to activate 'ALL RDM'
currently playing folder.
each time.
mode.
• To select to the displayed folder, press
• If no auxiliary device and USB is con-
• RDM : Only files in a folder are played
ENTER(NO.8) button.
nected, it displays "No Media" and
back in a random sequence.
returns to the previous mode.
• ALL RDM : All files in a USB memory are
8. File Search/ENTER Button
played back in the random sequence.
•
Turn this button clockwise to display
2. Automatic Track Selection
File name after current song.
Button
5. REPEAT Play Button
•
Turn this button counterclockwise to
• Press
[TRACK
] to return to the
Press this button for less than 0.8 sec-
display File Name before current song.
beginning of current file and Press
onds to activate 'RPT' mode and more
•
To select to the displayed song, press
again within 1 seconds to return the
than 0.8 seconds to activate 'FLD RPT'
the button.
previous track file.
mode.
• Press and hold [TRACK
] to initiate
• RPT : Only a file is repeatedly played
fast backward search.
back.
• Press [SEEK
] for less than 0.8 sec-
• FLD RPT : Only files in a folder are
onds to advance the next file.
repeatedly played back.
• Press and hold [SEEK
] to initiate
fast forward search.
6. INFORMATION Button
Displays the information of the file cur-
3. SCAN Play Button
rently played in the order of FILE NAME
➟TITLE➟ARTIST➟ALBUM➟FOLDER➟
Plays 10 seconds of each song in the
TOTAL FILE➟NORMAL DISPLAY➟FILE
USB device. Press the button once again
to cancel scanning.
NAME➟... (Displays no information if the
file has no song information.)
Press the button again to cancel the mode.
3 114
Knowing your vehicle
RUNNING iPod®(CDP MODEL)
1. iPod Selection Button
2. Automatic Track Selection Button
3. RANDOM Play Button
4. REPEAT Play Button
5. INFO Selection Button
6. Category Search Button
7. File Search/ENTER Button
A-200GHU
iPod® is a trademark of Apple Inc.
3 115
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст