KIA Cadenza (2019 year). Instruction — part 13

4 123

Features of your vehicle

Do not use the interior lights for
extended periods when the engine is
not running.
It may cause battery discharge.

Automatic turn off function
(if equipped)

The interior lights automatically turn
off approximately 20 minutes after
the ignition switch is turned off, if the
lights are in the ON position.
If your vehicle is equipped with the
theft alarm system, the interior lights
automatically turn off approximately
5 seconds after the system is armed.

Room lamp

•

: The light stays on at all times.

INTERIOR LIGHTS

WARNING -

Interior
Lights

Do not use the interior lights
when driving in the dark.
Accidents could happen
because the view may be
obscured by interior lights.

OYG046414

OYG046415

■

Type B

■

Type A

Features of your vehicle

124

4

Map lamp

• Press the lens (1) to turn ON the

map lamp.
To turn the map lamp OFF press
the lens (1) again.

•

(2) : DOOR mode

- The map lamp and room lamp

come on when a door is opened.
The lamps go out after approxi-
mately 30 seconds.

- The map lamp and room lamp

come on for approximately 30 sec-
onds when doors are unlocked
with a transmitter or smart key as
long as the doors are not opened.

- The map lamp and room lamp will

stay on for approximately 20 min-
utes if a door is opened with the
ignition switch in the ACC or
LOCK/OFF position.

- The map lamp and room lamp will

stay on continuously if the door is
opened with the ignition switch in
the ON position.

- The map lamp and room lamp will

go out immediately if the ignition
switch is changed to the ON posi-
tion or all doors are locked.

- To turn off the DOOR mode, press

the DOOR button (2) once again
(not pressed).

✽

✽

NOTICE

The DOOR mode and ROOM mode
can not be selected at the same time.

(3):

The map lamp stays on at all times.

(1):

The map lamp of driver’s side stays
on at all times.

(1):

The map lamp of passenger’s side
stays on at all times.

OYG046413

OYG046412

■

Type B

■

Type A

4 125

Features of your vehicle

Trunk room lamp (if equipped)

The trunk room lamp comes on
when the trunk is opened.
The trunk room lamp comes on as
long as the trunk lid opens. To pre-
vent unnecessary battery drain,
close the trunk lid securely after
using the trunk room.

Vanity mirror lamp (if equipped)

Opening the lid of the vanity mirror
will automatically turn on the mirror
light.

* The actual sunvisor lamp in the vehi-

cle may differ from the illustration.

Glove box lamp (if equipped)

The glove box lamp comes on when
the glove box is opened.
To prevent unnecessary battery
drain, close the glove box securely
after using the glove box.

CAUTION

- Vanity mirror

lamp

Make sure the mirror covers are
closed when the vanity mirror
lamps are not in use. Closing
the sunvisor with the lamp on
could damage the sunvisor or
cause battery drain.

OYG046416

OJF045072

OYG046418

Features of your vehicle

126

4

WELCOME SYSTEM (IF EQUIPPED)

Headlight (Headlamp) escort
function

When the headlight(light switch in
the headlight or AUTO position) is on
and all doors (and trunk) are locked
and closed, the position light and
headlight will come on for 15 sec-
onds if any of the below is per-
formed.
• Without smart key system

- When the door unlock button is

pressed on the transmitter.

• With the smart key system

- When the door unlock button is

pressed on the smart key.

At this time, if you press the door lock
or unlock button, the position light
and headlight will turn off immediate-
ly.

Interior light

When the interior light switch is in the
DOOR position and all doors (and
trunk) are locked and closed, the
room lamp will come on for 30 sec-
onds if any of the below is performed.
• Without smart key system

- When the door unlock button is

pressed on the transmitter.

• With the smart key system

- When the door unlock button is

pressed on the smart key.

- When the button of the outside

door handle is pressed.

At this time, if you press the door lock
button, the lamps will turn off imme-
diately.

Pocket lamp (if equipped)

When all the doors (and trunk) are
locked and closed, the pocket lamp
and puddle lamp will come on for
about 15 seconds if any of the below
is performed.
• With the smart key system

- When the vehicle is approached

with the smart key in possession.

4 127

Features of your vehicle

If you want to defrost and defog the
front windshield, refer to “Windshield
defrosting and defogging” in this sec-
tion.

Rear window defroster

The defroster heats the window to
remove frost, fog and thin ice from
the rear window, while the engine is
running.

To activate the rear window
defroster, press the rear window
defroster button located in the center
facia switch panel. The indicator on
the rear window defroster button illu-
minates when the defroster is ON.
If there is heavy accumulation of
snow on the rear window, brush it off
before operating the rear defroster.
The rear window defroster automati-
cally turns off after approximately 20
minutes or when the ignition switch is
turned off. To turn off the defroster,
press the rear window defroster button
again.

Outside rearview mirror defroster
(if equipped)

If your vehicle is equipped with the
outside rearview mirror defrosters,
they will operate at the same time you
turn on the rear window defroster.

Wiper deicer (if equipped)

If your vehicle is equipped with the
wiper deicer, it will operate when you
turn on the rear window defroster.

DEFROSTER

CAUTION -

Conductors

To prevent damage to the con-
ductors bonded to the inside
surface of the rear window,
never use sharp instruments or
window cleaners containing
abrasives to clean the window.

OYG046302

■

Type A

■

Type B

Features of your vehicle

128

4

AUTOMATIC CLIMATE CONTROL SYSTEM

OYG048301N/OYG048300N

1. Driver’s temperature control knob

2. AUTO (automatic control) button

3. Front windshield defroster button

4. Rear window defroster button

5. Air conditioning button

6. Air intake control button

7. OFF button

8. Fan speed control button

9. Mode selection button

10. Passenger's temperature control knob

11. SYNC temperature control selection but-

ton

12. Clock

13. Climate information screen selection but-

ton

■

■

Type B

■

■

Type A

CAUTION

Operating the blower when the
ignition switch is in the ON posi-
tion could cause the battery to
discharge. Operate the blower
when the engine is running.

4 129

Features of your vehicle

Automatic heating and air con-
ditioning

1. Press the AUTO button. The

modes, fan speeds, air intake and
air-conditioning will be controlled
automatically by setting the tem-
perature.

2. Turn the temperature control knob

to the desired temperature.

✽

✽

NOTICE

• To turn the automatic operation

off, select any button or switch of
the following:
- Mode selection button
- Air conditioning button
- Front windshield defroster button

(Press the button one more time
to deselect the front windshield
defroster function. The ‘AUTO’
sign will illuminate on the infor-
mation display once again.)

- Air intake control button
- Fan speed control switch
The selected function will be con-
trolled manually while other func-
tions operate automatically.

• For your convenience and to

improve the effectiveness of the
climate control, use the AUTO
button and set the temperature to
73°F (23°C).

OYG046303

■

Driver’s side

■

Passenger’s side

OYG046309

Features of your vehicle

130

4

✽

✽

NOTICE

Never place anything over the sensor
located on the instrument panel to
ensure better control of the heating
and cooling system.

OYG046304

4 131

Features of your vehicle

Manual heating and air condi-
tioning

The heating and cooling system can
be controlled manually by pressing
buttons or turning knob(s) other than
the AUTO button. In this case, the
system works sequentially according
to the order of buttons or knob(s)
selected.
1. Start the engine.
2. Set the mode to the desired posi-

tion.

For improving the effectiveness of
heating and cooling;
- Heating:
- Cooling:

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system on.

Press the AUTO button in order to
convert to full automatic control of
the system.

Mode selection

OYG048306N

Features of your vehicle

132

4

The mode selection button controls
the direction of the air flow through
the ventilation system.
The air flow outlet port is converted
as follows:

Face-Level (B, C, D, E, F)

Air flow is directed toward the upper
body and face. Additionally, each
outlet can be controlled to direct the
air discharged from the outlet.

Bi-Level (B, C, D, E, F)

Air flow is directed towards the face
and the floor.

Floor-Level (A, C, D, E)

Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windshield and
side window defrosters.

Floor/Defrost-Level (A, C, D, E)

Most of the air flow is directed to the
floor and the windshield with a small
amount directed to the side window
defrosters.

OYG048305L

4 133

Features of your vehicle

Defrost-Level
Most of the air flow is directed to the
windshield with a small amount of air
directed to the side window defrosters.

Instrument panel vents
The outlet vents can be opened or
closed separately using the thumb-
wheel (if equipped).
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

Temperature control

The temperature will increase to the
maximum (HI) by turning the knob to
the extreme right.
The temperature will decrease to the
minimum (Lo) by turning the knob to
the extreme left.
When turning the knob, the tempera-
ture will increase or decrease by
1°F/0.5°C. When set to the lowest
temperature setting, the air condi-
tioning will operate continuously.

OYG046307

OYG046308

■

Driver’s side

■

Passenger’s side

OYG046309

Features of your vehicle

134

4

Adjusting the driver and passenger
side temperature equally
• Press the “SYNC” button to adjust

the driver and passenger side tem-
perature equally.
The passenger side temperature
will be set to the same temperature
as the driver side temperature.

• Turn the driver side temperature

control knob. The driver and pas-
senger side temperature will be
adjusted equally.

Adjusting the driver and passenger
side temperature individually
• Press the “SYNC” button again to

adjust the driver and passenger
side temperature individually. The
illumination of button turns off.

• Operate the driver side tempera-

ture control knob to adjust the driv-
er side temperature.

• Operate the passenger side tem-

perature control knob to adjust the
passenger side temperature.

Temperature conversion
You can switch the temperature
mode from Centigrade to Fahrenheit
as follows:
While pressing the OFF button,
press the AUTO button for 3 seconds
or more.
The display will change from
Centigrade to Fahrenheit, or from
Fahrenheit to Centigrade.
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Fahrenheit.

Air intake control

This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi-
tion, push the control button.

OYG046310

OYG046311

4 135

Features of your vehicle

Outside (fresh) air position

With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.

Recirculated air position

With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat-
ing system and heated
or cooled according to
the function selected.

Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas-
senger compartment may become
stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in exces-
sively dry air in the passenger com-
partment.

Sunroof inside air recirculation
(if equipped)

If the sunroof opens while the heater
or Air Conditioning system operates,
the outside (fresh) air will be select-
ed automatically for ventilating the
car. Then, if you select the recirculat-
ed air position, the outside (fresh) air
will be selected automatically after 3
minutes.
If you close the sunroof, the intake
mode will be changed to the previous
selected mode.

Fan speed control

The fan speed can be set to the
desired speed by operating the fan
speed control button.
To change the fan speed, press (

)

the button for higher speed, or push
(

) the button for lower speed. To

turn the fan speed control off, press
the front blower OFF button.

OYG048312L

Features of your vehicle

136

4

Air conditioning

Press the A/C button to turn the air
conditioning system on (indicator
light will illuminate).
Press the button again to turn the air
conditioning system off.

OFF mode

Press the front blower OFF button to
turn off the front air climate control
system. However, you can still oper-
ate the mode and air intake buttons
as long as the ignition switch is in the
ON position.

OYG048313L

WARNING -

Reduced
Visibility

Continuous use of the climate
control system in the recirculat-
ed air position may allow
humidity to increase inside the
vehicle which may fog the glass
and obscure visibility.

WARNING -

Recirculated
Air

Continued use of the climate
control system in the recirculat-
ed air position can cause
drowsiness or sleepiness, and
loss of vehicle control. Set the
air intake control to the outside
(fresh) air position as much as
possible while driving.

WARNING -

Sleeping with
AC on

Do not sleep in a vehicle with
the air conditioning or heating
on as this may cause serious
harm or death due to a drop in
the oxygen level and/or body
temperature.

OYG046314

4 137

Features of your vehicle

Climate information screen
selection (if equipped)

Press the climate information screen
selection button to display climate
information on the screen.

System operation

Ventilation

1.Set the mode to the

position.

2.Set the air intake control to the out-

side (fresh) air position.

3.Set the temperature control to the

desired position.

4.Set the fan speed control to the

desired speed.

Heating

1.Set the mode to the

position.

2.Set the air intake control to the out-

side (fresh) air position.

3.Set the temperature control to the

desired position.

4.Set the fan speed control to the

desired speed.

5.If dehumidified heating is desired,

turn the air conditioning system (if
equipped) on.

• If the windshield fogs up, set the

mode to the

or

position.

Operation Tips
• To keep dust or unpleasant fumes

from entering the vehicle through
the ventilation system, temporarily
set the air intake control to the
recirculated air position. Be sure to
return the control to the fresh air
position when the irritation has
passed to keep fresh air in the
vehicle. This will help keep the driv-
er alert and comfortable.

• Air for the heating/cooling system

is drawn in through the grilles just
ahead of the windshield. Care
should be taken that these are not
blocked by leaves, snow, ice or
other obstructions.

• To prevent interior fog on the wind-

shield, set the air intake control to
the fresh air position and fan speed
to the desired position, turn on the
air conditioning system, and adjust
the temperature control to desired
temperature.

OYG048315L

Features of your vehicle

138

4

Air conditioning (if equipped)

All Kia Air Conditioning Systems are
filled with R-1234yf refrigerant.
1.Start the engine. Press the air con-

ditioning button.

2.Set the mode to the

position.

3.Set the air intake control to the out-

side air or recirculated air position.

4.Adjust the fan speed control and

temperature control to maintain
maximum comfort.

• When maximum cooling is desired,

set the temperature control to the
extreme left position, set the mode
control to the MAX A/C position,
then set the fan speed control to
the highest speed.

✽

✽

NOTICE

When opening the windows in humid
weather, air conditioning may create
water droplets inside the vehicle.
Since excessive water droplets may
cause damage to electrical equip-
ment, air conditioning should only be
used with the windows closed.

Air conditioning system operation tips
• If the vehicle has been parked in

direct sunlight during hot weather,
open the windows for a short time
to let the hot air inside the vehicle
escape.

• To help reduce moisture inside of

the windows on rainy or humid
days, decrease the humidity inside
the vehicle by operating the air
conditioning system.

• During air conditioning system

operation, you may occasionally
notice a slight change in engine
speed as the air conditioning com-
pressor cycles. This is a normal
system operation characteristic.

• Use the air conditioning system

every month only for a few minutes
to ensure maximum system per-
formance.

CAUTION -

Excessive A/C
Use

When using the air conditioning
system, monitor the tempera-
ture gauge closely while driving
up hills or in heavy traffic when
outside temperatures are high.
Air conditioning system opera-
tion may cause engine over-
heating. Continue to use the
blower fan but turn the air con-
ditioning system off if the tem-
perature gauge indicates engine
overheating.