KIA Stinger (2018 year). Instruction — part 10

4 69

Features of your vehicle

(1)

: MODE button for changing

modes

(2)

/

/OK : SELECT scroll switch

for setting the
selected item and
RESET scroll switch
for resetting items

❈ For the LCD modes, refer to “LCD

Window” in this chapter.

Gauges

Speedometer

The speedometer indicates the
speed of the vehicle and is calibrated
in miles per hour (mph) and/or kilo-
meters per hour (km/h).

Tachometer

The tachometer indicates the
approximate number of engine revo-
lutions per minute (rpm).
Use the tachometer to select the cor-
rect shift points and to prevent lug-
ging and/or over-revving the engine.

OCK047103

CAUTION -

Red zone

Do not operate the engine with-
in the tachometer's RED ZONE.
This may cause severe engine
damage.

OCK047102N

OCK047469N

■

Type B

■

Type A

Features of your vehicle

70

4

Engine Coolant Temperature
Gauge

This gauge indicates the tempera-
ture of the engine coolant when the
Engine Start/Stop button is ON.
If the gauge pointer moves beyond
the normal range area toward the “H”
position, it indicates overheating that
may damage the engine.
Do not continue driving with an over-
heated engine. If your vehicle over-
heats, refer to “If the Engine
Overheats” in chapter 6.

Fuel Gauge

This gauge indicates the approxi-
mate amount of fuel remaining in the
fuel tank.

✽

✽

NOTICE

• The fuel tank capacity is given in

chapter 8.

• The fuel gauge is supplemented by

a low fuel warning light which will
illuminate when the fuel tank is
nearly empty.

• On inclines or curves, the fuel

gauge pointer may fluctuate or the
low fuel warning light may come
on earlier than usual due to the
movement of fuel in the tank.

OCK047105

WARNING -

Hot radiator

Never remove the radiator cap
when the engine is hot. The
engine coolant is under pres-
sure and could cause severe
burns. Wait until the engine is
cool before adding coolant to
the reservoir.

OCK047106

4 71

Features of your vehicle

✽

✽

NOTICE -

Fuel gauge

Running out of fuel can expose vehi-
cle occupants to danger. You must
top and obtain additional fuel as
soon as possible after the warning
light comes on or when the gauge
indicator comes close to the “E
(Empty)” level.

✽

✽

NOTICE

Fuel display may not be accurate if
you are filling in sloping places.

Odometer

The odometer Indicates the total dis-
tance that the vehicle has been driv-
en and should be used to determine
when periodic maintenance should
be performed.
- Odometer range : 0 ~ 999999 miles

or 0 ~ 1599999 kilometers.

Outside Temperature Gauge

This gauge indicates the current out-
side air temperatures by 1°F (1°C).
- Temperature range : -40°F ~ 140°F

(-40°C ~ 60°C)

CAUTION

- Low fuel

Avoid driving with an extremely
low fuel level. Running out of
fuel could cause the engine to
misfire damaging the catalytic
converter.

OCK047118N

OCK047119N

■

Type B

■

Type A

OCK047111N

OCK047112N

■

Type B

■

Type A

Features of your vehicle

72

4

The outside temperature on the dis-
play may not change immediately
like a general thermometer to pre-
vent the driver from being distracted.
To change the temperature unit (from
°C to °F or from °F to °C)
The temperature unit can be
changed by using the “User Settings”
mode of the LCD Window.

❈ For more details, refer to “LCD

Window” in this chapter.

Transaxle Shift Indicator

Automatic Transaxle Shift Indicator

This indicator displays which auto-
matic transaxle shift lever is selected.

• Park : P
• Reverse : R
• Neutral : N
• Drive : D
• Sports Mode : 1, 2, 3, 4, 5, 6, 7, 8

OCK047128

OYG046121

■

Type B

■

Type A

4 73

Features of your vehicle

Over view

LCD windows show the following var-
ious information to drivers.
- Trip information
- LCD modes
- Warning messages

Trip information (Trip computer)

The trip computer is a microcomput-
er-controlled driver information sys-
tem that displays information related
to driving.

✽

✽

NOTICE

Some driving information stored in
the trip computer (for example
Average Fuel Economy) resets if the
battery is disconnected.

LCD WINDOWS (IF EQUIPPED)

OCK067036N

OCK067037N

■ Type A

■ Type B

Features of your vehicle

74

4

Trip Modes

Fuel Economy

Average Fuel Economy (1)
• The average fuel economy is calcu-

lated by the total driving distance
and fuel consumption since the last
average fuel economy reset.
- Fuel economy range: 0.0 ~ 99.9

MPG or L/100km

• The average fuel economy can be

reset both manually and automati-
cally.

Manual reset

To clear the average fuel economy
manually, press the OK button
(reset) on the steering wheel for
more than 1 second when the aver-
age fuel economy is displayed.

OCK047141N

• Tripmeter
• Fuel Economy
• Timer

Accumulated Info

• Tripmeter
• Fuel Economy
• Timer

Digital speedometer

Drive Info

• Average Fuel Economy
• Instant Fuel Economy

TRIP

Drive Mode

4 75

Features of your vehicle

Automatic reset

To make the average fuel economy
be reset automatically whenever
refueling, select the “Fuel economy
auto reset” mode in User Setting
menu of the LCD window (Refer to
“LCD window”).
• OFF - You may set to default man-

ually by using the trip switch reset
button.

• When driving - The vehicle will

automatically set to default once 4
hours pass after the Engine
Start/Stop Button is in the ACC or
OFF position.

• When refueling - After refueling

more than 2 gallons (6 liters) and
driving over 1 mph (1 km/h), the
vehicle will reset to default auto-
matically.

✽

✽

NOTICE

The average fuel economy is not dis-
played for more accurate calculation
if the vehicle does not drive more
than 10 seconds or 0.03 miles (50
meters) since Engine Start/Stop but-
ton is turned to ON.

Instant Fuel Economy (2)
• This mode displays the instant fuel

economy during the last few sec-
onds when the vehicle speed is
more than 4.9 mph (8 km/h).
- Fuel economy range : 0 ~ 50

(MPG), 0 ~ 30 (km/L, L/100 km).

CAUTION -

Low Fuel
Level

Level warning light on or with
the fuel level below “E” can
cause the engine to misfire and
damage the catalytic converter
(if equipped).

Features of your vehicle

76

4

Accumulated driving information
mode

Displays accumulated information
starting from mileage/fuel
efficiency/time default point.
• Accumulated information is calcu-

lated after the vehicle has run for
more than 0.19 mi (300 meters).

• If you press “OK” button for more

than 1 second after the Cumulative
Information is displayed, the infor-
mation will be reset.

• If the engine is running, even when

the vehicle is not in motion, the
information will be accumulated.

One time driving information mode

The vehicle will display Driving
Information once per one ignition cycle.
- Fuel efficiency is calculated after the

vehicle has run for more than 0.19 mi
(300 meters).

- The Driving Information will be reset

4 hours after ignition has been turned
off. So, when the vehicle ignition is
turned on within 4 hours, the informa-
tion will not be reset.

- If you press “OK” button for more

than 1 second after the Driving
Information is displayed, the informa-
tion will be reset.

- If the engine is running, even when

the vehicle is not in motion, the infor-
mation will be accumulated.

OCK047297N

OCK047298N

4 77

Features of your vehicle

Digital speedometer

This mode displays the current
speed of the vehicle.

Smart Shift (if equipped)

This mode displays the currently
selected drive mode.

LCD Modes

(1) SPORT mode (if equipped)
This mode displays Gauge, Lap
Timer, G-Force.

(2) Trip Computer mode

This mode displays driving informa-

tion like the tripmeter, fuel economy,
and so on.

❈ For more details, refer to “Trip

Computer” in this chapter.

OYG048156N

OCK047145L

OCK047466N

Features of your vehicle

78

4

(3) Turn by Turn mode (if equipped)
This mode displays the state of the
navigation.

(4) LKA/SCC mode (if equipped)
This mode displays the state of the
Smart Cruise Control (SCC) and
Lane keeping Assist (LKA).

❈ For more details, refer to “Smart

Cruise Control (SCC)” and “Lane
keeping Assist (LKA)” in chapter 5.

(5) User Settings mode
On this mode, you can change set-
tings of the doors, lamps and so on.

(6) Master warning mode
This mode informs of warning mes-
sages related to Low tire pressure or
malfunction of Blind-spot Collision
Warning and so on.

❈ For controlling the LCD modes,

refer to “LCD window Control” in
this chapter.

SPORT mode(if equipped)

This mode displays Gauge, Lap
Timer, G-Force.

OCK047129N

OCK047130L

OCK047131L

4 79

Features of your vehicle

Trip computer mode

This mode displays driving information
like the tripmeter, fuel economy, and
so on.

❈ For more details, refer to “Trip

Computer” in this chapter.

Turn By Turn Mode (if equipped)

This mode displays the state of the
navigation.

SCC with S&G/LKA mode
(if equipped)

This mode displays the state of the
Smart Cruise Control with Stop & Go
and Lane Keeping Assist (LKA).

OCK047465N

OCK047115N

OCK047146L

■ SCC with S&G

■ LKA

OYG046123N

Features of your vehicle

80

4

❈ For more details, refer to “Smart

Cruise Control with Stop & Go”
and “Lane Keeping Assist (LKA)”
in chapter 5.

Service mode

When Service Required is set, the
remaining distance/period to drive
appears on the LCD screen.
From the point at which the remain-
ing distance to drive amounts to 900
mi. (1,500 km) or the remaining peri-
od amounts to 3 days, Service
Required message automatically
displays and remained on LCD
screen for a number of seconds
every time the engine start/stop but-
ton is ON.

With Service Required in place,
Service Required Alarm message
pops up when an aggregated
amount of miles/time driven reaches
a certain point.
With Service Required mode, press
OK button for more than 1 second.
The values will return to initial setting
values.

❈See User Settings

Mode in this chapter for further
information about Service Required
Setting.

❈Service Required Setting

Battery Cable Disconnection, Fuse
Switch OFF, or Service Required
Setting values (an amount of
miles/time driven) can be randomly
changed. In such cases, re-enter
Service Required Setting values.

OCK047117N

4 81

Features of your vehicle

Master warning mode
(if equipped)

• This warning light informs the driv-

er the following situations

- LED head lamp malfunction

(if equipped)

- Smart Cruise Control with Stop &

Go malfunction (if equipped)

- Forward Collision-Avoidance

Assist malfunction (if equipped)

- Blind-Spot Collision Warning radar

blind (if equipped)

- Smart Cruise Control with Stop &

Go radar blind (if equipped)

- Lamp malfunction
- High Beam Assist malfunction (if

equipped)

The Master Warning Light illumi-
nates if one or more of the above
warning situations occur. At this time,
the LCD Modes Icon will change
from (

) to (

).

If the warning situation is solved, the
master warning light will be turned off
and the LCD Modes Icon will be
changed back to its previous icon (

).

Distance to empty

• The distance to empty is the esti-

mated distance the vehicle can be
driven with the remaining fuel.
- Distance range : 1 ~ 9,999 mi. (1

~ 9,999 km)

OCK047143N

OCK047156N

■

Type B

■

Type A

Features of your vehicle

82

4

• If the estimated distance is below 1

mi. (1 km), the trip computer will
display “---” as distance to empty.

✽

✽

NOTICE

• If the vehicle is not on level ground

or the battery power has been
interrupted, the distance to empty
function may not operate correct-
ly.

• The distance to empty may differ

from the actual driving distance as
it is an estimate of the available
driving distance.

• The trip computer may not regis-

ter additional fuel if less than 1.6
gallons (6 liters) of fuel are added
to the vehicle.

• The fuel economy and distance to

empty may vary significantly
based on driving conditions, driv-
ing habits, and condition of the
vehicle.

User Settings Mode

Description

On this mode, you can change set-
ting of the doors, lamps, and so on.

Shift to P to edit settings

This warning message appears if
you try to adjust the User Settings
while driving.

For your safety, change the User
Settings after parking the vehicle,
applying the parking brake and
pressing the parking “P” button.

OCK047140L

WARNING

Do not adjust the User Setting
while driving. You may lose your
steering control and cause
severe personal injury or acci-
dents.

OCK047142L

4 83

Features of your vehicle

Head-Up Display (HUD) (if equipped)

• Enable Head-Up Display : If this

item is checked, Head-Up Display
will be activated.

• Display Height : Adjust the height

of the HUD image on the wind-
shield glass.

• Rotation : Adjust the degree of the

HUD rotation.

• Brightness : Adjust the intensity of

the HUD brightness.

• Contents Selection

- Turn by Turn : If this item is

checked, Turn by Turn will be acti-
vated.

- Lane Keeping Assist : If this item

is checked, LKA will be activated.

• Speed size :

Small/ Medium/Large

• Speed color :

White/Orange/Green

Driving Assist (if equipped)

• Smart Cruise Control with Stop &

Go Response (if equipped) :
- Choose the sensitivity (slow, nor-

mal, fast) of the smart cruise con-
trol.

❈For more details, refer to “Smart

Cruise Control with Stop & Go” in
chapter 5.

• Driver Attention Warning : Cloose

the alert stage (Off/Normal/Early
stage) of the Driver Attention
Warning.

• Lane Keeping Assist (LKA, if

equipped) :
- Lane Departure Warning : To acti-

vate the lane departure warning
function.

- Standard LKA : To activate the

standard LKA mode.

- Active LKA : To activate the active

LKA mode.

❈For more details, refer to “LKA

(Lane Keeping Assist)” in chapter 5.

• Forward Collision-avoidance Assist

(FCA, if equipped) :
- To activate or deactivate the FCA

system.

❈For more details, refer to “Forward

Collision-avoidance Assist(FCA)”
in chapter 5.

• Forward Collision Warning

(FCW, if equipped)
- Choose the sensitivity of the for-

ward collision warning.
(Late/Normal/Early)

❈For more details, refer to “Forward

Collision-avoidance Assist(FCA)”
in chapter 5.

• Blind Spot Collision Warning (if

equipped)
- If this item is checked, the blind

spot collision warning function
will be activated.

❈For more details, refer to “Blind-spot

Collision Warning” in chapter 5.

Features of your vehicle

84

4

• Blind Spot Collision Warning

Sound (if equipped)
- If this item is checked, the blind

spot collision warning sound
function will be activated.

❈For more details, refer to “Blind-spot

Collision Warning” in chapter 5.

Door/Liftgate

• Automatically Lock :

- Disable : The auto door lock oper-

ation will be deactivated.

- Enable on Speed : All doors will

be automatically locked when the
vehicle speed exceeds 9.3mph
(15km/h).

- Enable on Shift : All doors will be

automatically locked if the auto-
matic transaxle shift lever is shift-
ed from the P (Park) position to
the R (Reverse), N(Neutral), or D
(Drive) position.

• Automatically Unlock :

- Disable : The auto door unlock

operation will be canceled.

- Vehicle Off : All doors will be auto-

matically unlocked when the
Engine Star/Stop Button is set to
the OFF position.

- On Shift to P : All doors will be

automatically unlocked if the
automatic transaxle shift lever is
in the parking position by press-
ing “P”button.

• Two Press Unlock (if equipped)

If this item checked, the two press
unlock function will be activated.
(Only the driver’s door will unlock
when unlock button is pressed
once and all doors will unlock when
the same button is pressed again
within 4 seconds.)

• Power Liftgate (if equipped)

- If this item is checked, the power

liftgate function will be activated.

❈For more details, refer to “Power

Liftgate” in this chapter.

• Smart Liftgate (if equipped)

- If this item is checked, the smart

liftgate function will be activated.

- If the power liftgate function is not

activated, you cannot activate
this function.

❈For more details, refer to “Smart

Liftgate” in this chapter.