Geely FC. Manual part — 94
Geely FC. Manual part - 94
Engine cover/automobile door--Rear automobile door
Rear automobile door
Overhaul
Hint:
z
When assembling, please work by the sequence which is opposite with disassembling
sequence; if necessary, it will have assembling instruction..
z
Overhaul procedure for right side is same as the left side.
1. Disassemble left rear door control panel assembly [68000176]
Use screw driver to disassemble left rear door control panel assembly.
Fixing
clasp
Fixing
clasp
373
2. Disassemble left rear door inner trim board assem-
bly [68010057]
(a) Disassemble three screws.
(b) Disconnect the fixing clamp, then pull inner trim board up-
wards to disassemble it.
3. Disassemble left door inner handle assembly
[68010051]
Disassemble inner handle and two pull cables from inner handle.
4. Disassemble left rear door repairing hole cover.
Disassemble repairing hole cover.
5. Disassemble exterior seal tape of left rear door glass
[68000196]
6. Disassemble seal tape of left rear glass guide slot
[68000199]
(a) Disassemble seal tape of left rear glass guide slot.
7. Disassemble left rear door window glass guide slot
assembly [68000187]
Disassemble two bolts and comparting pillar of rear window.
8. Disassemble left rear door triangle glass [68000181]
(a) Disassemble left rear door triangle glass.
Note: do not damage the glass.
(b) Disassemble corner window waterproof rubber from the glass.
9. Disassemble left rear glass assembly [68000179]
Hint: insert the cloth in the door steel board to prevent the glass from scratching.
(a) Drop the door glass.
(b) Incline door glass and disassemble the roller pole of lift from glass leading slot to disassemble door
glass.
10. Disassemble left rear door lift assembly [67000124]
(a) Disassemble the joint.
(b) Disassemble four bolts and window lift.
Engine cover/automobile door--Rear automobile door
11. Spread lubricating grease on automobile body.
Spread MP lubricating grease on sliding and turning parts of
door locker.
12. Disassemble left rear door exterior handle pedestal.
(a) Use planetary socket wrench to disassemble the screw
and left rear door exterior handle cover.
(b) Disassemble exterior handle.
(c) Use planetary socket wrench to disassemble the screw
and left rear door exterior handle pedestal.
13. Assemble left rear door locker organization assem-
bly [68000191]
(a) Assemble left rear door locker organization driver and two
screws.
(b) Use planetary socket wrench to assemble left rear door
locker organization assembly and three screws.
Torque: 5.0 N
⋅⋅⋅⋅⋅m
(c) Assemble the bolt.
(d) Connect the joint.
14. Assemble left rear door glass lift assembly
[67000124]
Torque: 5.5 N
⋅⋅⋅⋅⋅m
15. Assemble left rear door repairing hole cover.
(a) Assemble repairing hole cover on door steel board.
Hint:
z
z
z
z
z
When assembling repairing hole cover, pull out
connecting rod and joint from repairing hole cover.
z
z
z
z
z
After assembling repairing hole cover, connecting
rod and joint could not be bent or concaved.
z
z
z
z
z
After assembling repairing hole cover, it is neces-
sary to confirm the affixing situation of adhesive
tape.
374
Adhesive
tape
Engine cover/automobile door--Rear automobile door
Adjustment
Hint: working procedure for right side is same as the left side.
1. Check the clearance of left rear door.
(a) Check whether following data is in standard value.
375
Engine cover/automobile door--Rear automobile door
2. Adjust the clearance of left rear door.
(a) Loosen hinge screw cap at the side of automobile body to
adjust the door.
Torque: 26 N
⋅⋅⋅⋅⋅m
(b) Loosen hinge screw cap at the side of automobile door to
adjust the door.
Torque: 26 N
⋅⋅⋅⋅⋅m
(c) Loosen lightly fixing screw of locker pedestal, and use plastic
hammer to knock lightly the locker pedestal to adjust its
position.
(d) Lock the fixing screw of locker pedestal again.
Torque: 23 N
⋅⋅⋅⋅⋅m
At the side of
automobile body
376
At the side of
automobile body
At the side of
automobile door
At the side of
automobile door
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст