Geely Emgrand X7. Manual part — 581

–

Not display Max.height “0” except for 0.0-0.9 L/100km

–

Update frequency of display of oil consumption will be once 10s.

The multifunctional instrument can display a compass and altitude.

NL11-3060b

北

南

东

西

HASL

m

TPMS

BMBS

P

.

Compass

NL11-3061b

North

Western

East

South

North

Western

East

South

2323

Altitude

NL11-3062b

– The compass totally points at 8 directions (east, south, west, north, southeast, southwest,

northeast, northwest).

– Angle range in each range is 40 degree, and there is 5 degree of transition area between

adjacent direction. Display the corresponding font in the corresponding direction.

–

Its function display: it mainly depend on magnetic sensors to come true

–

Altitude height display range is -100-5000m.

–

Near-surface resolution is 10-20m.

–

Not display Max.height“0”.

2324

11.7.2.2 Odometer display mode switch

The LCD can display 4 different types of values in the middle rows of the right area, including
mileage subtotal, traveling hours, average speed and available mileage. The above mentioned
values can be switched by pressing the mode switching button (see "11.7.4 Component Positions").
Only after engine ignition, the mode key changing-over and zero clearing key operation can be
used.

Short press the DISP key, the area corresponding to LCD displays the switching as follows:

Sub-mileage - average speed - driving mileage - average fuel consumption after refueling.

Long press the DISP key:

–

When displaying subtotal mileage, the subtotal mileage will be cleared.

–

When displaying average vehicle speed, average vehicle speed will be cleared with speed at
the same time during traveling.

–

Fuel consumption displays L/100km as per hundred kilometers

–

Press ignition button for 60s, when traveling, it display 00:00.

Mode switching logic is as shown in figure as follows:

NL11-3019b

The main LCD defaults the mode of displaying subtotal mileage in the case of flameout; and the
mode can not be switched. When igniting the engine again, the main LCD will display the ignition
mode last time.

Mileage

subtotal reset

Average speed

reset

Instrument

panel ignition

Display
mileage
subtotal

Display

average speed

Display

travelled

distance

Average fuel
consumption

after filled oil

Display

travelling time

Stroke time

reset

2325

Altitude adjustment

NL11-3063b

Regulate the single digit by short press, regulate by long press and confirm by short press again.
Then, regulate the tens digit by short press, regulate by long press and confirm by short press
again, and so forth. The OK status is by default when the button is not long pressed.

2326