Geely Emgrand X7. Manual part — 677
Geely Emgrand X7. Manual part - 677
12.8.3 Dismantle and install
12.8.3.1 Instrument desk replacement
Dismantlement Procedure
Warning!
Warning: Refer to Warning on Battery Disconnection in Warnings and Precautions.
Notes:
Please dismantle the trim panel assembly with a special-purpose body repair tool; otherwise this will easily cause
the trim panel to be damaged.
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery Cable Disconnection/Connection
Procedures.
2. Dismantle the auxiliary instrument panel
assembly. Refer to 12.8.3.2 Replacement of
Auxiliary Instrument Panel.
3. Dismantle the steering wheel. Refer to 7.3.6.3
Replacement of Steering Wheel.
4. For dismantling of light combined switch and
upper and lower protective plates, refer to
11.3.8.1 Replacement of light combined switch.
NL12-0229b
5. Dismantle the combination instrument cover and the combination instrument assembly. Refer to 11.6.7.1
Replacement of Combination Instrument Assembly.
6. For dismantlement of the AC control panel, see 8.2.8.1 Replacement of Air Conditioner Control Panel.
7. For dismantlement of the central air outlet panel, see 8.2.8.18 Replacement of Instrument Panel Air Outlet.
8. For dismantlement of the audio unit, see 11.2.7.4 Replacement of Audio Unit.
9. For dismantlement of the multi-functional instruments, see 11.13.8.1 Replacement of Multi-functional
Instruments.
10. For dismantling of environment light and sun sensor, refer to 11.3.8.16 Replacement of environment light
and sun sensor.
11. For dismantling of left and right front vertical upper trimming plate, refer to 12.9.1.2 Replacement of
left/right front vertical upper trimming plate assembly.
12. Refer to 12.8.3.3 Replacement of Glove Box of the Instrument Panel to dismantle the glove box of the
instrument panel.
13. Dismantle 2 fixing screws and 2 bolts of instrument table left lower trimming plate.
Notes:
2 fixing screws of the left lower trim panel of the dashboard only need to be dismantled in the vehicle without
knee SRS.
2707
14. Disconnect wire harness connector of knee safety
airbag.
NL12-0230b
15. Respectively disconnect anti-theft indicator lamp
and headlamp height adjusitn switch wire harness
connector.
NL12-0231b
16. Dismantle right trimming plate of instrument
panel.
NL12-0232b
2708
17. Dismantle 2 fixing bolts of safety airbag on
passenger's side.
NL12-0233b
18. Dismantle 4 fixing bolts and 111 screw rod on
the instrument desk.
19. Upper cover and lower cover of separation
instrument desk
NL12-0234b
20. Disconnect harness connector of Upper cover of
instrument desk back passenger side airbag
21. Take down upper cover of instrument desk
assembly.
NL12-0235b
2709
22. Dismantle 4 fixing screws on the upper part of
lower cover of instrument panel and 6 bolts on
lower part.
23. Remove lower cover of instrument desk.
NL12-0236b
Installation Procedure:
1. Install low shield of instrument desk on the cross
beam of instrument panel 上.
2. Install 4 fixing screw and 6 bolts of lower cover
of instrument desk and tighten them.
Torque: 20Nm (Metric) 14. 8lb-ft(English system)
NL12-0237b
3. Move upper cover of instrument table into, and
connect wire harness connector of passenger's
side safety airbag.
NL12-0236b
2710
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст